Sanus NF18 Speaker Stands
Natural Foundations Series IV 18" (Black lacquer)
Our take on the Sanus NF18 Speaker Stands
High-performance speakers deserve high-performance stands. From top to bottom, Sanus' latest wood speaker stands combine fine furniture looks with ultra-rigid construction for solid support and optimum sound quality.
Each base and top plate is made of anti-resonant MDF and has a smooth low-luster black finish. Brass speaker studs and neoprene pads are included to isolate the speaker from the top plate. Plastic feet for the underside of the base plate protect wood or tile floors (adjustable carpet spikes also included). A patented concealed speaker wire path on the rounded support pillar keeps cables out of sight. Assembly takes just minutes.
Priced per pair
- black lacquer finish
- stand height: 18"
- top plate measures 7-3/8" x 7-3/8"
- base plate measures 10-1/2" x 11-3/4"
- supports 25 lbs.
- floor spikes to help minimize vibrations
- warranty: 5 years
- Our 60-day money-back guarantee
What's in the Box:
- 2 Black base plates
- 2 Black top plates
- 2 Black pillars
- Four 2.25" Base screws
- 4 1.25" Top plate screws
- 8 Nuts
- 8 Spiked feet
- 2 Plastic wire covers
- 8 Brass speaker studs
- 8 Self-adhesive neoprene speaker pads
- 8 Plastic isolation feet (to cover spiked feet)
- 8 Pan-head screws
- Instruction Manual
Looks great, easy installation .
Angel, Guaynabo , PR
Sanus NF18 Speaker Stands Reviews
Average Customer Review(s):
Thanks for submitting your review
Design: Each base is made of anti-resonant MDF finished with three coats of hand-sanded black lacquer. Adjustable floor spikes are included to provide stable footing on carpeted floors, and to further minimize resonance. A single sturdy black pillar supports the low-profile top plate, which features a choice of neoprene isolation pads or brass isolation studs. Plastic wire covers give your speaker stands a neater look by concealing the wires completely.
Spiked Feet: The spiked feet pierce the carpeting and anchor the stand to the floor, keeping the speaker stable and reducing resonance. With the spiked feet installed, the stand height is adjustable from 17.75" to 18". Note: If you do not wish to use the spiked feet, Sanus has included plastic feet that will not scratch your floor.
Brass Studs: These upward facing brass studs hold the speaker stable and minimize resonance.
Neoprene Pads: The sharp points on the brass studs can scratch the bottom of the speaker. If this is of concern, you can use the supplied neoprene pads to stabilize the speaker.
Weight Capacity: Each speaker stand can support up to 25 lbs.
Top Shelf Dimension: The top shelf is 7-3/8" wide and 7-3/8" deep.
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.
Why did you buy this?
perfect height for my speakers [ Robert Nov 06, 2017 ]
Right size, right price, right color. [ Charles E. May 15, 2017 ]
Researched speaker stands on the Crutchfield site and felt these were just what I needed. [ Mark A. Mar 29, 2017 ]
right size right price [ charles Feb 21, 2017 ]
They were the height and color I wanted; The description sounds like they will be very stable and sound isolating. They come with various options for feet and for posts or pads between top and speakers. [ Paul Feb 19, 2017 ]
Reviews [ Thomas Jan 28, 2017 ]
Right size for my room and Crutchfield had an excellent price with free shipping. [ Bob Nov 28, 2016 ]
price and looked good. [ Scott Sep 02, 2016 ]
Was actually looking for a 21" but had to go with me his since its closest to my needs. Wish they made a 21". [ Hammad Aug 29, 2016 ]
Needed stands for bookshelf speakers. Crutchfield is the place to go for these types of items. [ Michelle Aug 25, 2016 ]
Wanted low profile stands - they seem perfect for my needs [ Joseph Aug 17, 2016 ]
For my surround sound which has 6 speakers. This pair will complete the deal. [ Douglas Feb 12, 2016 ]
Nice looks. Fits my new speakers. Wife likes this model vs others. [ Joshua Feb 04, 2016 ]
will take my Spendor Prelude speakers [ Douglas Sep 11, 2018 ]
very nice looking wood, stands look sturdy and well made. price is good too. [ norman Jun 25, 2017 ]
I chose this because of the style using a combination of wood and black lacquer. [ Alvin C. May 10, 2017 ]
I have several cherry stands from this company. I don't mind paying for quality. [ DWIGHT D Feb 18, 2017 ]
Need these to raise my bookshelf speakers off the floor, get them to a higher listening level. [ David Sep 08, 2016 ]
I bought them as a wedding present, I have a pair myself and liked them. [ LINDSEY CLYDE Mar 25, 2016 ]
This is my second set of the Sanus speaker stands in cherry finish. I have purchased another set of Polk Audio speakers and the cherry finish maches Polk Audio's cherry finish quite well. I am very satisfied with the quality of the stands. [ Evan Feb 08, 2016 ]
for front surround speakers. [ Dennis Jan 31, 2016 ]
looked best for what i needed [ brian Jan 08, 2016 ]
Correct size and color to match speakers in new listening area. Also, Crutchfield promises fast delivery. Thank you. [ Thomas Dec 06, 2015 ]
4 questions already asked
Haven't tried the studs. I always use the pads. [ Ed Sep 07, 2016 ]
Use the rubber stick-on tabs included with the speakers in plce of the brass carpet posts. [ KEVIN Feb 15, 2014 ]
There are no top shelf spikes. If you are refering to the brass carpet spikes they are attached to the base. If I did not answer your question then please re-submit with more detail Ok I see from the photo what you mean-the 2 pair I bought had rubber self stick that are applied when you assemble the stand-not.the brass ones pictured here. Since all hardware is included in a seperate bubble pack I would think you would need to attach those brass corner pieces. I don't think they are spikes, they look roumded to me. Brass is actually better to absorb vibration than rubber. You should not be concerned that your speaker will vibrate off the stand. [ KEVIN Feb 14, 2014 ]
Yes. They are. [ Patrick Feb 01, 2014 ]
Yes, I was able to remove one with a pair of small pliers. Note: the speaker wire is routed through the center of the stand so if you remove the small spikes you will have to replace with rubber feet or something else in order for the speaker to be stable with the wire underneath... [ the guy who needed a new chain Jan 28, 2014 ]
I can't help you , they are in my summer home and I will not be back there for about 5 VERY long and cold months, but if I recall they were removable. Love the stands they work well... [ ERIC L Jan 27, 2014 ]
Not sure if my response was recorded. Spikes are not installed. You can use the sticky pads supplied. Or use velcro tape for a more secure installation. The pads supplied work fine for me. [ ERIK Jan 27, 2014 ]
The spikes are not installed. I did not use them, simply put the speakers onto the flat surface using the supplied sticky pads. If you are worried about them staying put I suppose some velcro tape would hold them in place. Mine don't get jostled or hit or whatever and seem secure enough just using the sticky pads, 4 small triangles per speaker, as supplies. [ ERIK Jan 27, 2014 ]
Don't know. Did not try to modify. Used exactly as supplied. Like the stands. Would purchase again. Sorry cannot address specific point queried. [ ROBERT V Jan 27, 2014 ]
Thank you fine gentlemen,I do appreciate the answers. [ MICHAEL T Jan 27, 2014 ]
yes,you install them yourself . [ RICHARD S Jan 27, 2014 ]
yes. It also come with pads to put on the top shelf which is what I used instead of the spikes. [ Randall Jan 27, 2014 ]
Great stands very happy with them. Yes the spikes u can remove. [ RICK Jan 27, 2014 ]
Yes. You have the option of using the adhesive vinyl tabs or you can use your own. [ MICHAEL Jan 27, 2014 ]
Hi Michael, I believe that the spikes don't come pre-intalled and are an option. I use the supplied rubber pads for the pedestal shelf that the speaker sits on. I hope that helps, and let me know if you have any more questions. Brian [ BRIAN J Jan 27, 2014 ]
I would have to say no. Clearly stated in the discription they say 25 pounds is limit. If you like your speakers why risk it? [ LINDSEY CLYDE Jan 12, 2017 ]
Most of us just put the speakers on top of stand and not fastened together .My vote is it would be too unstable and your foot or child would suffer. [ Vernon Jan 12, 2017 ]
Yes they would be fine. I think the stands look great [ Jeff Jan 11, 2017 ]
As long as the speakers are less than 25 pounds each they will work great with this speaker stand. [ Jeff Jan 31, 2014 ] Staff