Niles VCS HUB8
8-speaker pair connecting block
Our take on the Niles VCS HUB8 by Crutchfield's Barry Montgomery
- power handling: 600 watts RMS per channel
- accepts up to 16 gauge wire
- designed to mount in standard (6" center) structured wiring cabinets
- slotted wings allow for vertical and horizontal mounting
- 6-7/8"W x 3"H x 1-1/4"D
- warranty: 10 years
Easy to install and a great addition to all my speakers !
Anonymous, Cedarburg, WI
What's in the Box:
- Volume Control Expansion Hub
- 2 Snap-in "Christmas Tree" plugs
- 4 Self-adhesive rubber feet
- Installation & Operation Guide
Niles VCS HUB8 Reviews
Average Customer Review(s):
Thanks for submitting your review
Overview: The VCS HUB8 is a speaker distribution hub that mounts in a structured wiring cabinet or on the wall. It connects between the speaker-level output of an amplifier or receiver and the Niles volume controls, allowing you to adjust the sound level of each pair of speakers.
Removable Screwless Speaker Connectors: Two piece, screwless speaker connectors make installation quick and secure. Each connector can accept up to 16-gauge wire. Larger (lower gauge) wire is not recommended, as it will not fit into the connectors. Solid-core, aluminum, or "Romex" wire is not recommended.
Mounting: The VCS HUB8 is designed specifically to fit into a structured wiring cabinet, with snap-in "Christmas Tree" plugs supplied for convenient installation. The VCS HUB8 can also be mounted to the wall.
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.
Why did you buy this?
Electrician told me this was a good one for my AV stuff [ Amy May 24, 2017 ]
This ties into utilizing sending sound to 8 areas, works seamlessly with Niles Volume controls. Quality. [ Matthew Apr 11, 2017 ]
4 questions already asked
I forwarded your question to an Advisor and they responded with the following: The hub will connect between the speaker level output of the receiver or amp and connect to a Niles volume control. This Niles item would be a better choice: http://www.crutchfield.com/p_190SS6/item.html If you would like to discuss further you can contact an Advisor directly by phone (1-800-324-9695) or online chat. [ Krissy Aug 24, 2015 ] Staff
Yes, 16 speakers total. I have mine running to 8 impedance matching volume controls, then out to the speakers. I use this device to consolidate the 8 pairs of home run wiring before going into the amp. [ Richard Aug 17, 2015 ]
Yes, 16 speakers total. [ Tim Aug 15, 2015 ]
Yes it does but you have to be careful because you can overload the output of your amp if you try to drive them all at too high a volume [ THOMAS Aug 15, 2015 ]
Yes if you look closely at the unit you will see that each of the 8 connectors accommodates 4 wires [ Pamela Aug 15, 2015 ]
The manual for this device says: "With the VCS HUB8, you can distribute the output from your amplifier or receiver to the volume controls for up to eight pairs of stereo speakers." That would be 16 speakers total. [ Richard Aug 14, 2015 ]
Yes, 16 speakers total. [ CHRIS Aug 14, 2015 ]
Yes, up to 16 total. I have each leg going to a volume controller which handles two speakers. [ Roger Aug 14, 2015 ]
Yes, each output is for a pair of speakers, so 16 would be the max. [ Ralph Aug 14, 2015 ]
Yes 8 pairs so a total of 16 speakers.. [ JAMES A Aug 14, 2015 ]
I forwarded your question to an Advisor and they responded with the following: Yes, that Niles VCS HUB8 would work with an Onkyo stereo receiver. It would require impedance matching volume controls for each set of speakers, though. If you would like to discuss further you can contact an Advisor directly by phone (1-800-324-9695) or online chat. [ Krissy Mar 25, 2014 ] Staff