Skip Navigation

Klipsch Reference Premiere RP-280FA

Dolby Atmos® enabled floor-standing speaker (Ebony vinyl finish)

9 Reviews

California customers: Please click here for your Proposition 65 warning.

Item # 714RP280AE

This item is no longer available.

Shop all Dolby Atmos Enabled Speakers

Outlet model available

Overview

Our take on the Klipsch Reference Premiere RP-280FA

Ready to dive into the immersive world of Dolby Atmos? Then add a pair of the Klipsch Reference RP-280FA floor-standing speakers to your home theater, and get ready for an incredible sound experience. This Atmos enabled tower delivers dynamic sound through two 8" front-firing woofers and a signature horn tweeter. It also projects sound effects above you, bringing three-dimensional sound to your living room. 

Lifelike sound that fills the room

Ready to dive into the immersive world of Dolby Atmos? Then add a pair of the Klipsch Reference RP-280FA floor-standing speakers to your home theater, and get ready for an incredible sound experience. This Atmos enabled tower delivers dynamic sound through two 8" front-firing woofers and a signature horn tweeter. It also projects sound effects above you, bringing three-dimensional sound to your living room. 

Bounce sound off the ceiling for enhanced surround effects

The RP-280FA features an upward-firing driver array built into the top of the enclosure. These drivers are angled to reflect sound waves off of your ceiling and down to your listening positions. Soundtrack effects like raindrops, helicopters, and rustling leaves take on a new level of realism.

Matching drivers deliver classic Klipsch sound 

The RP-280FA uses voice-matched drivers in the top and front speaker arrays to provide a seamless sound experience. The front-firing Tractrix® horn tweeter delivers precise placement of instruments and vocals. These speakers have rockin' bass, too. Their Cerametallic™ woofers use a titanium voice coil to achieve high-efficiency, low distortion, and extended low-frequency response.

The '280FA also uses a horn-shaped port for smooth, efficient airflow in and out of the cabinet. This makes for clean, powerful bass with reduced port noise and low-frequency distortion.

Build a complete Klipsch system

Team a pair of RP-280FA tower speakers with these other Klipsch Reference Premiere Series speakers to create a high-impact Atmos home theater system.

Recommended center channel speakers: Klipsch RP-450CA
Recommended surround speakers: Klipsch RP-140SA
Recommended subwoofers: Klipsch R-112SW, Klipsch R-115SW

Product Highlights:

    Main Channel Specifications:
      • frequency response: 32-25,000 Hz (±3dB)
      • impedance: 8 ohms compatible
      • sensitivity: 98 dB
      • power handling: up to 150 watts RMS (600 watts peak)
      • 90° x 90° Hybrid Cross-Section Tractrix® horn with 1" LTS (Linear Travel Suspension) titanium diaphragm tweeter
      • two 8" Cerametallic™ cone woofers with rigid titanium voice coil formers
      • bass-reflex (ported) cabinet design
      • rear-firing Tractrix port provides fast, efficient airflow from the cabinet for clear, powerful bass
      • dual binding post speaker terminals for bi-amping or bi-wiring
    Height Channel Specifications:
      • frequency response: conforms to Dolby Atmos specification
      • sensitivity: conforms to Dolby Atmos specification
      • power handling: up to 75 watts RMS (300 watts peak)
      • 90° x 90° Hybrid Cross-Section Tractrix® horn with 1" LTS titanium diaphragm tweeter
      • 6-1/2" Cerametallic™ cone woofer
      • acoustic suspension (sealed) cabinet design
      • single binding post speaker terminals
    • magnetically attached front grille for a clean, streamlined look
    • ebony vinyl finish
    • built-in MDF (Medium Density Fiberboard) base for increased speaker stability
    • 10-1/2"W x 43"H x 19"D
    • weight: 71.75 lbs.
    • warranty: 5 years
    • Our 60-day money-back guarantee

    What's in the Box:

    • Floor-standing loudspeaker (Ebony)
    • Grille (attached)
    • 4 Spiked feet
    • 6 Rubber feet
    • Important Safety Instructions
    • Warranty Information

    Scratch & Dent items may be missing non-essential accessories. In some cases the manufacturer's accessories have been replaced with generic equivalents.

    Great speaker,great sound,Klipsch always makes it presence known,no difference here as they truly light up the room with sound and effect,movies and music are great,hey that's Klipsch!!!

    Mark, Sugar Grove, IL

    Reviews

    Klipsch Reference Premiere RP-280FA Reviews

    Average Customer Review(s):

    (9 Reviews)
    rewards card
    Great Gear Giveaway

    Submit a review and enter to win a $350 rewards card

    Review this product

    Thanks for submitting your review

    Most reviews are processed and published within 5 business days. You will receive a confirmation email once your review has been published.

    Your Review

    Use the stars below to rate the overall product on a scale of 1-5
    1500
    Upload your photos

    Not visible. Email associated with order.
    (e.g., Charlottesville, VA)

    Additional Fields (optional)

    500
    500

    By submitting this review, you agree to our terms and review guidelines.

    Filter by rating

    Customer photos


    << >>
    Details

    Hands-on research

    Product Research

    Features

    Dolby Atmos Enabled Floor-Standing Speaker: The Klipsch RP-280FA is built upon the same technology and power as Klipsch's RP-280F floor-standing speaker, but with an elevation channel integrated into the top of the speaker to reflect sound off the ceiling to deliver the overhead Dolby Atmos experience.

    • Main Channel: The Klipsch RP-280FA's main channel consists of a 1" titanium dome LTS tweeter with hybrid Tractrix Horn and dual 8" Cerametallic cone woofers in a bass reflex enclosure. The main channel can handle up to 150 watts of continuous power and 600 watts of peak power. The main channel connects to your AV receiver's main front speaker outputs.
    • Height Channel (for Dolby Atmos): The floor-standing speaker's height channel consists of a 1" titanium dome LTS tweeter with hybrid Tractrix Horn and one 6.5" Cerametallic cone woofer in a sealed enclosure. The height channel can handle up to 75 watts of continuous power and 300 watts of peak power. The height channel connects to your AV receiver's Dolby Atmos effect speaker outputs.

    90° x 90° Hybrid Tractrix Horns: A redesigned Tractrix Horn utilizes a circular horn throat paired to a square horn mouth to further improve high-frequency response and extension, while enhancing imaging and dynamics. The compressed molded rubber construction adds high frequency damping to reduce harshness and improve detail. This creates the cleanest, most natural sound possible. These 90° x 90° Hybrid Tractrix Horns provide a wider sweet spot while maintaining controlled directivity of the sound.

    LTS Tweeters: Behind the Tractrix Horn lies a 1" titanium tweeter with a linear travel suspension for open, natural, sound. The Linear Travel Suspension minimizes distortion for enhanced, detailed performance.

    Cerametallic Woofers: The woofers of the RP-280FA floor-standing loudspeaker features Klipsch's distinctive, copper-colored Cerametallic material. Made with an anodized aluminum, this cone is strong and dent resistant. The anodizing process converts its inner and outer surfaces to ceramic. The outcome is a rigid cone with superb damping characteristics that will not flex or resonate at frequencies within the woofer's operating range The woofers also employ a rubber surround for added durability.

    Crossover Network: The Klipsch RP-280FA floor-standing speaker's crossover network is constructed using extremely high-quality components including top-of-the-line internal wiring, polyester film-type capacitors and an air-core inductor to ensure signal purity and proper driver integration. The speaker's enhanced crossover frequencies (1750Hz/2000Hz) offer smoother on-axis and off-axis integration.

    Bass Reflex MDF Enclosure: The Klipsch RP-280FA employs a bass reflex enclosure with a rear-firing Tractrix port for greater efficiency and bigger bass response. Utilizing Tractrix geometry, the all new Reference Premiere bass port allows for the most efficient, fastest air transfer from the cabinet  for a clean, powerful low frequency response. The speaker's rigid cabinet offers improved internal cross-bracing to minimize panel vibrations that can color sound.

    • MDF Plinth: The all new satin painted MDF plinth footers of the Klipsch Reference Premiere series floor-standing speakers lend an acoustically sound, authoritative stance when placing the speakers on your wood, tile, or carpeted floors.
    • Magnetic Grille: The floor-standing loudspeaker features a removable magnetic low-diffraction grille which easily snaps into place over its polymer front baffle.

    Binding Post Terminals: The floor-standing speaker offers dual binding post terminals for the main channel and single binding post terminals for the height channel. The main channel's two sets of binding posts are connected by jumpers. Using the dual binding posts, you can bi-amp or bi-wire the main channel of the speakers. The binding post terminals will accept banana plugs (single only), pin-connectors, spade-connectors, and bare wire.

    Note: The speaker's main channel binding posts will need to be connected to your AV receiver's main front speaker outputs, while the speaker's height channel binding posts must be connected to your AV receiver's Dolby Atmos effects speaker outputs.

    Rubber or Spike Feet: The floor-standing speaker comes with rubber and spike feet. The included rubber feet offer safe placement of the speaker on your tile or hardwood floors. The included optional spikes are intended to increase stability on carpeted floors; spikes are not recommended for hard surfaces. The rubber feet simply stick to the bottom of the speaker's MDF plinth, while the spikes screw into the bottom of the speaker's MDF plinth.

    • The rubber feet add approximately 0.125" of height to the speaker.
    • The spike feet add approximately 0.875" of height to the speaker.

    Placement: The Reference Premiere series floor-standing loudspeakers are designed to perform well in a wide variety of locations but you will get the most out of the speakers by following these simple guidelines.

    • For optimum performance, Klipsch suggests placing the speakers 6'-15'apart. They may also be toed-in slightly for better stereo imaging. The listening position should be approximately 1-1.5x the distance separating the speakers.
    • The floor-standing loudspeakers should be equal distance from the floor and the wall behind them. It can also help to have the left and right speakers at different distances from their nearest side walls. This sort of staggering helps smooth the bass range.
    • The speaker requires a few inches of clearance behind it to allow its port to breathe and will sound best when they are at least two feet from any nearby walls.

    Our Product Research Team

    At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

    Accessories
    Q & A

    Customer Q&A

    Crutchfield asked  
    Why did you buy this?

    I was looking for an integrated Atmos solution to complement my existing Klipsch RP system. [ BRIAN  Nov 04, 2018 ]
    Highly rated Atmos speakers [ STEVEN H.  Aug 12, 2018 ]
    I've admired Klipsch speakers for years but never purchased them. After reading and watching a number of tests, I decided that I wanted Atmos and these were the speakers for me. I have a pretty big room to fill with sound so these giants are part of a "full" Reference Premier 7.2.2 set up. Just listening to them as a pair of regular stereo speakers is amazing! When you add the rest of the speakers to the mix for home theater, they get even better. They are expensive but highly recommended. [ JAMES D  Jul 11, 2017 ]
    I wanted this particular model, and it was on sale at a good price. [ Joel  Jun 02, 2017 ]
    Articles
     
     
     
     

    would like to send you to a different page.

    Go there