Pair of side-clamping speaker ceiling mounts
Our take on the Pinpoint AM41C by Crutchfield's Kramer Crane
A sturdy solution for ceiling-mounting your speakers
Setting up an audio system over a bar? How about in a gym or other space where you want music to reach across the room? The Pinpoint AM41C-B ceiling mounts offer a handy solution for mounting your speakers. Bolt them to an overhead joist and enjoy spacious sound without taking up any wall or floor space.
Flexible placement options
The mounts can tilt down as much as 10 degrees and rotate up to 90 degrees left or right (for speakers under 11" wide), so you can direct sound where you want it. Use the non-marking, non-slip clamps to grip your speakers. Or, for an even more secure installation, use the included screws to attach the mounts to your speakers.
Decorative covers fit over the wall plates to conceal the mounting screws and wires for a clean-looking installation.
- pair of side-clamping speaker ceiling mounts
- each bracket supports medium- to large-sized bookshelf speakers up to 35 lbs.
- fits speakers up to 5-1/2"-12" wide and up to 10" deep
- wire path supports up to 16-gauge speaker wire
- tilt range: up to -10°
- swivel range: 90° left or right
- drop length: 25-3/4" from the ceiling to the bottom of the mount
- non-marking, non-slip isolation pads provide a safe and secure grip for the speaker
- installation hardware included (joist-mounted installation required)
- warranty: 5 years
- Our 60-day money-back guarantee
What's in the Box:
- 2 Ceiling-brackets
- 2 Platforms with attached side-clamps
- 2 End-caps
- 2 Decorative covers
- 4 Self-adhesive foam-pads
- 2 Rubber covers
- 6 Self-tapping screws
- 6 Lag-screws
- 2 Lag-bolts
- 2 Washers
- 2 Nuts
- Installation Instructions
Side-Clamping Bookshelf Speaker Ceiling-Mount Bracket: The PinPoint AM41L side-clamping bookshelf speaker ceiling-mount bracket with 25.5" support arm has been designed for traditional wood cabinet bookshelf style speakers that do not have a standard mounting point from the manufacturer. Using a solid platform with side clamps, the PinPoint AM41L offers a 90° swivel and 10° tilt. The AM41L can support a speaker that is 5.5"-12" wide and up to 13" deep with a maximum weight of 35 lbs. Side clamps have specialized non-marking, non-slip isolation pads to provide a safe and secure contact point for the speaker. The AM41L comes with a decorative cover for the ceiling plate to conceal mounting screws for a clean installation (all mounting hardware is included).
Note: The PinPoint AM41L is sold as a pair for mounting two speakers. The AM41L is available in black only.
Speaker Capacity: The AM41L's side-clamping design works well with bookshelf loudspeakers that measures 5.5" to 12" wide with a maximum depth of 10" and a maximum weight of 50 lbs.
High-Quality Steel Construction: The PinPoint AM41L is constructed from high-quality steel with a smooth satin black powder coated finish for long life and durability.
Side-Clamp Design: The PinPoint AM-41L is designed to mount bookshelf-style speaker using a side-clamping system that requires the speakers to have flat sides. The speaker may be mounted either vertical or horizontal as long as it is between the listed clamping range and does not exceed the maximum weight handling. Speakers are held in place using two adjustable side-clamps. The provided non-marking and non-slip isolation pads hold the speaker securely without marring the finish. Additional security screws are provided for a more permanent installation if desired.
Long Arm with Angle Adjustment: The PinPoint AM-41L features a fixed 25.5" support arm to suspend your bookshelf speakers from the ceiling (25.5" measured from top of ceiling bracket to the lower side-clamping platform). The side-clamping platforms can be tilted downward up to 10° and can be swiveled 90° left or right.
Wire Management: Additional features include wire management channel cutouts on the ceiling plate allowing speaker wire to be run directly behind the mount for a clean, professional appearance. Speaker wire routing paths are found on the ceiling-plate as cut-out slots at the top, bottom, sides, and center. These can be used with up to 14-gauge wire and can be used when mounted to either dry-wall or wood-studs.
Keyhole Slotted Mounting Plate: The PinPoint AM41L uses a "keyhole"-style mounting system to allow for quick and level installation. The top mounting hold is slotted so that the mounting screw can be installed on the ceiling first, then the ceiling-plate can be placed on the screw and then leveled. The AM41L comes with a decorative cover for the ceiling plate to conceal mounting screws for a clean installation (all mounting hardware is included).
- #2 Phillips-head screwdriver
- 1/2" Socket or wrench
- 10mm Socket
- 7/32" drill bit
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.