Viper Model 3606V 1-Way car security and keyless entry system

Features

Overview: The Viper Model 3606V 1-way car security system will protect your vehicle with the most up-to-date electronic technologies available, including the Stinger DoubleGuard shock sensor, the Revenger six-tone siren, and the Failsafe Starter Kill. The system comes with one 4-button 1-way remote (7656V). The system features 5 auxiliary outputs to provide keyless entry and other convenience features, and is covered by a Limited Lifetime warranty.

Installation: Because of the complexity of modern vehicles and car security systems, professional installation is recommended. For experienced do-it-yourselfers, you may be able to save time and money by using a T-harness or vehicle interface from XpressKit. Contact a Crutchfield Advisor to see if there is an interface available for your vehicle.

SuperCode: This Viper car alarm is equipped with SuperCode technology, which uses software-based system signal encryption, and replaces the hardware-based Clone Safe Code-Hopping technology found in previous models. SuperCode allows you to control the security systems in two vehicles using a single remote transmitter.

Failsafe Starter Kill: To prevent your vehicle from being stolen, the control unit has a built-in relay which will disable the starter. The Automatic Engine Disable (AED) feature, when programmed "on," disables the starter 30 seconds after the ignition is turned off. To start the car, it will be necessary to disarm the system with the remote control.

Revenger Siren: The Model 3606V includes the Revenger Soft Chirp siren (model 514LN). It consists of six different tones in sequence. Tones 2 through 6 can be eliminated by cutting the black/white wire loop, resulting in a single tone siren. The siren chirps can be either full volume or six decibels quieter than the 120dB full alarm blast.

Stinger Double-Guard Shock Sensor: The system features the Stinger Double-Guard Shock Sensor, which is designed to pick up impacts to the vehicle or glass. The sensitivity of the shock sensor is adjustable on the control module. When the sensitivity is set, a light impact will generate the "Warn-Away" pre-warning chirp of the siren. A harder impact will trigger a full alarm blast.

SmartStart Compatible: The Model 3606V is compatible with Directed's SmartStart technology, which allows you to control or locate the car security system from virtually anywhere using your smartphone. With the addition of the VSM200, VSM250, or VSM50BT SmartStart module you can lock/unlock your vehicle, open the trunk, or activate the panic mode using the Viper SmartStart app loaded onto your smart device.

Remote Control: The Model 3606V includes one 7656V remote: a 4-button 1-way LED remote. It sends the commands to the alarm's control center, but does not receive confirmation indications from the alarm system. Pressing the Function button 1-4 times in combination with other remote buttons takes you to advanced function levels. The buttons fully control the following features and functions of the security system:

• Lock Button: Locks the doors and arms the vehicle
• Unlock Button: Unlocks the doors and disarms the vehicle
• AUX Button: Operates Aux 1 through Aux 4 functions as assigned
• Remote Start Button: Starts the vehicle if a remote start system is installed. If not, it can be programmed to command Aux 1 or Aux 4

Active vs. Passive Arming: You can activate or arm the system by pressing the Lock button for one second (Active Arming). The system will respond with a short siren chirp. If you have connected the vehicle's power door locks to the system, the doors will lock. The system can be programmed to arm itself automatically (Passive Arming). If programmed for passive arming, the system will arm 30 seconds after the ignition is turned off and the system detects that you have left the vehicle by opening and closing a door. A warning chirp is sounded 20 seconds after the last door is closed to indicate the system is about to arm. At the 30 second mark, the parking lights will flash to indicate the system is armed.

Auxiliary Outputs: The Model 3606V's five auxiliary channel outputs can activate many of the convenience features found on today's vehicles. Some of those features include: Trunk release, Open/close windows, Left sliding door open/close, Right sliding door open/close, Rear hatch open/close, Sunroof open/close, Audio system, and Headlights.

Control Center: The alarm includes a self-adhesive Control Center which serves multiple purposes. The control center houses the system antenna for receiving commands from the remotes. It also contains the Valet button and a bright blue status LED. It connects to the Control Module via a ribbon cable, and is typically adhered to the upper part of the windshield.

Dome Light Control: You can control your vehicle's dome light in a number of ways:

• Security Only: The dome light activates for 30 seconds after the system is disarmed.
• Ignition Controlled: The dome light activates for 30 seconds after the ignition is turned off. (May be programmed on or off)

Valet Mode: You can prevent the system from automatically arming and triggering by using the Valet Mode. This is very useful when washing the vehicle or having it serviced. In Valet Mode, the security system will not arm, even with the remote control, but all convenience features (door locks, trunk release) continue to work normally.

Power Door Locks: The system has door lock relays on-board, and can directly interface with most electric power door lock systems drawing 30 amps or less. If additional door lock relays are required, a plug-in door lock relay module can be added.

Nuisance Prevention Circuitry: The Nuisance Prevention Circuitry (NPC) prevents annoying repetitive trigger sequences due to faulty door pin switches or environmental conditions, such as thunder, jackhammers, airport noise, etc. If the alarm triggers three times within a 60 minute period, and each time the same sensor or switch triggers the alarm, the NPC ignores, or bypasses, that sensor or switch (along with any other sensors or switches sharing the same zone) for 60 minutes.

Optional Accessories: The Viper Model 3606V can accept a wide range of convenience and security accessories from XpressKit:

• Additional Remotes: Replacement or additional 7656V remotes for Model 3606V are available. The alarm system is also compatible with the 2-way 7756V LCD remote and the 2-way 7856V LED remote.
• Field Disturbance Sensor: The XpressKit 508D Field Disturbance Sensor detects movement inside or just outside of your vehicle.
• Audio Sensor: XpressKit 506T for glass impact audio detection.
• Tilt Sensor: XpressKit 507M to monitor the tilting of your parked vehicle (caused by an attempt to jack up or tow your vehicle)
• Ultrasonic Sensor: XpressKit 509U to monitor the airspace inside your vehicle to detect subtle window tampering.