AudioQuest Rocket 33
Bi-wire speaker cables with pre-attached banana plugs (35-foot pair)
Our take on the AudioQuest Rocket 33 by Crutchfield's Steve Kindig
Many of today's speakers can be "bi-wired." They feature two sets of connectors, which provide separate inputs for the woofer and tweeter. Until now, bi-wiring required using two regular sets of speaker cables, but AudioQuest's innovative Rocket 33 single bi-wire cable delivers the sonic benefits of conventional bi-wiring along with much lower cost and simpler hookup. They enable your speakers to reproduce sound as cleanly and faithfully as possible using a single cable. You'll enjoy sound that's spacious, finely detailed, and beautifully balanced.
The benefits of bi-wiring
When a full-range signal is sent through a single speaker cable, the interaction of the magnetic fields created by the different frequencies can negatively impact the sound produced by your speakers. In particular, large amounts of bass energy can interfere with more delicate high frequencies. Bi-wiring transfers audio signals separately to your speaker's woofer and tweeter inputs, eliminating this distortion-causing interaction. If your speakers can be bi-wired, they should be for optimum performance.
Solid conductors improve accuracy and clarity
Each of the cable's six conductors is a single, unbroken strand of pure copper, which ensures highly efficient signal transfer with minimal loss. Solid conductors eliminate electrical and magnetic interference that can add brittleness to the sound of multi-strand conductor cables.
Precise cable geometry
The Rocket 33 uses a precise combination of different size conductors: 21-, 19-, and 17-gauge conductors for the high-frequency signal, and 20-, 18-, and 16-gauge conductors for the low-frequency signal (see more photos). This difference in diameter reduces the possibility of distortion caused by any particular conductor's sonic "signature." A specialized spiral arrangement of the three conductors in each bundle minimizes potential signal interaction, resulting in sound that's clearer and more dynamic.
- length: 35 ft.
- designed for bi-wiring speakers with dual sets of connectors
- speaker cables with pre-attached banana plugs
- six solid, pure copper conductors:
- one 21-gauge perfect-surface copper, one 19-gauge long-grain copper, and one 17-gauge long-grain copper conductor for the treble signal
- one 20-gauge perfect-surface copper, one 18-gauge long-grain copper, and one 16-gauge long-grain copper conductor for the bass signal
- PVC and carbon-loaded PE insulations
- cable labeled for proper direction of signal flow
- cold-welded silver-plated banana plugs
- gray/red textile cable cover
- warranty: 5 years
- Our 60-day money-back guarantee
What's in the Box:
- Two 35' lengths of speaker wire (terminated with bi-wire PK-BFA terminals)
- Product Information sheet
I had bought a Rocket 33 center channel wire, and l loved it so much that l picked up a pair for my left & right B&W CDM 9/NT.speakers. l never bi-wired my speakers before now, and it make a nice tight sound in the bass & treble. It's worth the money, you can hear the differnce.
Mac, Canandaigua, NY
AudioQuest Rocket 33 Reviews
Average Customer Review(s):
Thanks for submitting your review
Bi-Wiring: AudioQuest Rocket 33 is a Single-BiWire cable. When the halves are separated at the speaker end, the Dual-Triple design turns Rocket 33 into a true Double-BiWire set, thanks to the magnetic autonomy of each tri-conductor section. On its own, one tri-conductor group would be a little light-weight in performance as it is biased towards treble finesse. The other tri-conductor group is biased toward the bass; its more forceful and lacking ultimate resolution. Together they form a completely optimized full range design. When separated, the Dual-Triple design lets Rocket 33 be a maximum performance Double-BiWire in a single cable.
- Treble Group:
- 21 AWG Solid Perfect-Surface Copper (PSC) Conductor
- 19 AWG Solid Long-Grain Copper (LGC) Conductor
- 17 AWG Solid Long-Grain Copper (LGC) Conductor
- Bass Group:
- 20 AWG Solid Perfect-Surface Copper (PSC) Conductor
- 18 AWG Solid Long-Grain Copper (LGC) Conductor
- 16 AWG Solid Long-Grain Copper (LGC) Conductor
Solid Conductors: The use of solid conductors eliminate harshness and confusion due to strand interaction. All six of Rocket 33's conductors are solid. Solid conductors prevent strand interaction, a major source of cable distortion. Electrical and magnetic interaction between strands in a conventional cable is the single greatest source of distortion, often causing a somewhat harsh, dirty and confused sound. Solid conductors are the most important ingredients enabling Rocket 33's very clear sound. Whether a conductor is solid or stranded, skin effect is a prime distortion mechanism in speaker cables. Rocket 33 very simply keeps this effect out of the audio range by using conductor sizes that are below the threshold for audible distortion.
Long-Grain Copper/Perfect-Surface Copper: Rocket 33 uses a combination of Long-Grain Copper (LGC) and extremely high-purity Perfect-Surface Copper (PSC). All conductors are solid, which prevents strand interaction, a major source of distortion. Surface quality is critical because a conductor can be considered as a rail-guide for both the electric fields within a conductor, and for the magnetic fields outside the conductor.
- Long-Grain Copper (LGC): LGC has fewer oxides within the conducting material, less impurities, less grain boundaries, and definitively better performance.
- Perfect-Surface Copper (PSC): The smooth and pure PSC further eliminates harshness and increases clarity. The astonishingly smooth and pure Perfect-Surface eliminates harshness and greatly increases clarity compared to OFHC, OCC, 8N, and other coppers. High-purity PSC further minimizes distortion caused by grain boundaries, which exist within any metal conductor.
Dual-Triple Geometry: The relationship between conductors defines a cables most basic electrical values (capacitance and inductance). However, even when those variables are kept in a reasonable balance, the relationship between conductors can be varied in ways that greatly affect the sound. The Dual-Triple construction of Rocket 33 allows for significantly better dynamic contrast and information intelligibility than if the same conductors were run in parallel. The specific 3-cross geometry used in each half of Rocket 33 maximizes this advantage.
Spread-Spectrum Technology (SST): Any single size or shape of conductor has a specific distortion profile. Even though radially symmetrical conductors (solid or tubular) have the fewest discontinuities, any particular size does have a sonic signature. SST is a method for significantly reducing the awareness of these character flaws by using a precise combination of different size conductors. The six different SST-determined conductor sizes used in Rocket 33 allow an exceptionally clear, clean, and dynamic sound.
Directional: The PVC "pants" on either end of Rocket 33 are marked "Speaker End" or "Amp End". Please use cables in the direction required.
Cold-Weld Terminations: Superior AudioQuest connectors allow Rocket 33 to be securely attached to any type of equipment. AQ ends are dull looking because there is no harsh sounding shiny nickel layer underneath the silver. The connection between the plug and conductors is made using AQ's Cold-Weld system which provides a superior connection that ensures that the structural integrity of the conductor is kept completely intact. The Cold-Weld system refers to a combination of high pressure at the point of contact and the use of copper impregnated paste. A controlled amount of pressure is used to essentially make the conductor and connector mechanically "as one" without the use of heat. The copper bearing paste acts as both a copper oxide retardant, and as well as a very effective contact enhancer. AQ's Cold-Weld system ensures a practically perfect connection.
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.
Why did you buy this?
Love Audioquest pricepoint/quality [ Jeffery Jul 23, 2018 ]
Reviews for this speaker wire were good. I needed bi wire banana plugs for front speakers. [ Jeff Dec 29, 2017 ]
This is fourth set of Audioquest cables I have purchased! 14 gauge wire, heavily shielded, no detectable S/N interference, Audiophile quality! i have a integrated amp, and two power amps, to high quality speakers, and a 1500 RMS watt sub-woofer! Great sound! Cables are important to sound quality! [ J. PATRICK Dec 19, 2017 ]
too bi-wire my polk audio towers [ D Jul 23, 2017 ]
good if not excellent quality for an unbeatable price [ finis Apr 09, 2017 ]
Need and AudioQuest quality [ J. PATRICK Dec 21, 2016 ]
I have used audio quest speaker wire in the past and it makes a huge improvement in the sound. [ Douglas Sep 22, 2016 ]
I think Gil give me a good advice. Gil's Bio: http://www.crutchfield.com/Support/Bio.aspx?bio=38 [ Mj23bolt Sep 05, 2016 ]
Great value [ Jim Apr 19, 2016 ]
I wanted nice speaker cables. I'm using radio shack now with some home made banana clips. They are running a pari of Martin Logans. Sad really. [ Robert Jul 14, 2018 ]
I chose this pair of cables because I have purchased Audioquest cables in the past and find them to be high quality. Also, the positive reviews reflect this. [ Don Jan 17, 2018 ]
Excellent reviews [ Tim Oct 10, 2016 ]
Great value [ Jim Apr 19, 2016 ]
2 questions already asked
Yes, you will find one one set each for your right & left speaker. [ Joseph Aug 18, 2016 ]
Yes [ Jorge Aug 16, 2016 ]
Two [ James Aug 16, 2016 ]
Yes it is for a pair [ ERIK Aug 16, 2016 ]
I bought these and they came as a set, so two speakers per order. They are pretty nice, just be really careful with the plugs, they are supper thin silver and they don't look like they will stand up well if someone trips over or pulls on the wire while connected. It looks like it would be bad if they bent and obviously worse if they broke. Aside from that, I have been happy with them. [ Christian Aug 16, 2016 ]
Yes! One pair of speaker cables for two speakers! Great cables for the price! Fantastic sound quality! [ Frank Aug 16, 2016 ]
Yes it is for two speakers. [ Robert Aug 16, 2016 ]
This is bi-amping, not bi-wiring. Bi-amping might damage the speakers. First, I would replace the PSB jumpers with short speaker cables and then use conventional cables to power the speakers. Determine if there is a noticeable improvement in the sound. Then contact PSB and ask them if bi-wiring would result in a noticeable improvement in the sound. Based on their reply, make the determination to upgrade the cables to either conventional or bi-wire. [ ROBERT Feb 04, 2014 ]
Hi Matt, I suppose I am a good person to ask this question, because my bookshelf speakers also happen to be PSB B6s. The end of the AudioQuest Rocket 33 cable with two banana plugs (one black and one red) should be inserted into either the A or the B speaker outputs on your amp. The other end of the speaker cable with four banana plugs (one black treble, one black bass, one red treble, and one red bass) should be inserted into the PSB B6's inputs. First you'll need to remove the four little plastic centers on the speaker's four inputs. Everything is color coordinated, so you can't miss. Since I installed my Rocket 33s, my speakers definitely sound fuller and clearer. The cables are pretty pricey, but the improvement in sound quality was worth the additional expense to me. Ed [ EDWARD A Feb 03, 2014 ]
No, the end with 4 plugs goes to the speaker. The end with 2 plugs would go to the receiver. [ RICHARD Feb 03, 2014 ]