Low-profile fixed wall mount for 40"-70" TVs
Our take on the Secura QLL22 by Crutchfield's Ralph Graves
The low-profile Secura QLL22 mount holds your TV only 1-1/4" from the wall. It's a great way to show off your modern, ultra-thin TV, for a budget-friendly price. Installation is a simple three-step process: Mount the wall plate to wall studs, attach the brackets to the back of your TV, then hang the TV on the wall plate. The mount will make an audible click when the bracket's in place, ensuring a secure fit. After installation, you can shift your TV slightly to the right or left for proper positioning. Quick release straps that hang behind the TV make it easy to disconnect it from the wall plate.
- designed for TVs 40"-70"
- supports up to 100 lbs.
- mount holds TV approximately 1-1/4" from wall
- quick-release locking system
- stud-mounting required
- movable bracket for off-center stud placement
- UL-certified for safe mounting and structural integrity
- brackets: 25-9/16"W x 2-15/16"H x 1-1/4"D
- warranty: 5 years
- Our 60-day money-back guarantee
What's in the Box:
- 2 TV brackets
- 2 TV/Wall stops
- Four M6x12mm screws
- Four M6x35mm screws
- Four M8x16mm screws
- Four M8x20mm screws
- Four M8x35mm screws
- Two 5/16"x2-3/4" lag-bolts
- Two 3/4" washers
- Four M6/M8 washers
- Four 22mm spacers
- 2 Concrete anchors
- Instruction Manual
- Warranty Information
Secure and great flexibility in tv placement
Victor, San Francisco, CA
Secura QLL22 Reviews
Average Customer Review(s):
Thanks for submitting your review
TV Compatibility: The Secura QLL22-B2 is a low-profile wall-mount bracket for 40"-70" flat-panel TVs up to 100 lbs.
VESA Pattern: The Secura QLL22-B2 features universal mounting brackets to accommodate horizontal hole spacing on back of TVs of 100mm-600mm and a vertical hole spacing of 100mm-400mm. It will accommodate the following VESA hole patterns in accordance with industry standards set by the Video Electronics Standards Association.
- 100 x 100
- 200 x 100
- 200 x 200
- 300 x 200
- 300 x 300
- 400 x 200
- 400 x 300
- 400 x 400
- 600 x 400
Note: The included TV brackets screws into the top of mounting holes of your TV, while the included back-stops are screwed into your TV's bottom mounting holes.
M6/M8 Mounting Hardware: The Sanus QLL22-B2 comes with M6 and M8 size bolts of differing lengths to mount the bracket to your TV. Additional hardware may be required for your specific model of TV. For example; shorter or longer screws, thicker or slimmer washers or spacers. These additional accessories can often be found at your local hardware store.
Construction: The Secura QLL22-B2 wall-mount bracket is constructed of heavy-gauge steel with a durable powder-coated black finish. This solid construction provides strength and increased safety.
Low-Profile Design: A slim, low-profile design positions your flat-panel TV just 1.25" from the wall for a super thin look.
Center TV Quickly: Your TV can slide from side-to-side on the QLL22-B2 wall-mount for perfect positioning on the wall. The TV brackets easily shift left and right on the wall plate to allow perfect TV placement, even with off-center wall studs.
Quick-Releasing Locking System: A quick-release locking system secures your TV to the QLL22-B2's wall-mount plate. Once the wall-plate is anchored to the wall studs and the two TV brackets are attached to the back of your television, the two TV brackets hook and click into the wall-plate. There is a strap on each TV bracket which allows you to remove the brackets and your television from the wall-plate.
Installation Tools: The following tools are recommended for mounting the QLL22-B2:
- Tape measure
- Stud finder
- 7/32" Drill bit (for wood stud)
- 3/8" Masonry bit (for concrete block)
- 1/2" Socket wrench
- Phillips-head Screwdriver
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.
Why did you buy this?
price [ Roberto Nov 06, 2017 ]
This looks like the perfect mount to install a new 65" OLED TV... that has most of the install attachments very low on the back. This is close to the wall, and will still allow some room for cables. [ Denise V. Aug 05, 2017 ]
1 question already asked
3 answers How do you access the rear of the TV to make connections. Most slim picture frame type mounts have "kickstands" that allow the bottom of the TV to be tilted away from the wall so you can get behind the TV to connect wires. Doesn't seem like this is possible with this mount? [ Al Oct 14, 2018 ]
Difficult unless you have side mounted connections. [ JAMES Oct 14, 2018 ]
There is some "give" on this mount to tilt the bottom of the TV away from the wall, but it might be easier to connect any cables to the TV first before mounting. [ Victor Oct 14, 2018 ]
The Sony TV had most of the connections facing down, so I was able to reach up behind the TV to attach the cables. There was one connection I had to make before hanging the TV on the mount. I chose this mount because of limited space, and cost. [ GEORGE Oct 14, 2018 ]