Klipsch R-3650-W II
California customers: click here for your Proposition 65 warning.Please
Our take on the Klipsch R-3650-W II by Crutchfield's Marshall Chase
If you're looking for great sound but don't like the idea of conventional speakers taking up your floor space, check out the Klipsch® R-3650-W II. This speaker delivers full, dynamic sound and features a hideaway in-wall design that virtually disappears into your room's décor. Install multiple R-3650-W IIs in your family room for a clutter-free home theater, or use a pair in your bedroom, den, or home office for stereo music.
This speaker's rigid woofer produces accurate bass and mid-bass. The pivoting horn lets you direct clean highs toward your favorite listening spot, for a broad soundstage with well-defined imaging. And a tweeter level switch helps you adjust the sound to suit your personal taste and your room's acoustics.
Horn technology for room-filling sound
Because high-frequency sounds are more directional than bass frequencies, it's especially important to target them right toward your ears. Klipsch places their aluminum tweeter inside a flared opening, known as a "horn." This design brings out details in everything you listen to, while reducing reflections that can color the sound. The pivoting Tractrix® horn also improves dynamics and efficiency, for powerful, "front row" sound that remains crystal-clear at all volume levels.
Slimmer chance of being seen
The '3650-W II keeps a low profile with its SlimTrim™ grille. The visible frame size is reduced by 90% and grille depth is reduced by 80% over previous designs, for a nearly flush finish that blends in beautifully. The paintable aluminum, magnetic grille attaches securely with ease to virtually eliminate resonant distortion.
An optional in-wall bracket is recommended for installing the R-3650-W II in new construction.
- 1" aluminum dome tweeter with pivoting Tractrix® horn
- 6-1/2" IMG woofer
- power handling: up to 50 watts RMS (200 watts peak)
- frequency response 60-23,000 Hz (±3dB)
- sensitivity 92 dB
- 8-ohm impedance
- treble attenuation switch
- IR receiver knock-out for remote repeater systems
- paintable SlimTrim® magnetic grille
- cutout dimensions: 7-15/16"W x 13-1/16"H
- mounting depth: 3-11/16"
- warranty: lifetime
- Our 60-day money-back guarantee
What's in the Box:
- In-wall speaker
- White metal mesh grille
- Cardboard template
- Owner's Manual (En/Fr/Sp)
Upgrade old wall speaker, with Klipsch R-3650-W II big difference in sound.
M275, Honolulu, HI
Klipsch R-3650-W II Reviews
Average Customer Review(s):
Thanks for submitting your review
Features and Specs
|Quantity in Package||Single|
|Cutout Size||7.9375 x 13.0625|
|Power Range (Watts)||50|
|Connector Type||Spring posts|
|Parts Warranty||Ltd. Lifetime|
|Labor Warranty||Ltd. Lifetime|
High Efficiency: The high-efficiency design of the Klipsch in-wall speakers allows you to get much more output than most in-wall and in-ceiling speakers. Due to the long speaker wire runs that are common in whole-house audio systems, the power coming from the amplifier is significantly reduced by the time it reaches the speakers. The 92dB efficiency of this speaker means it will play much louder at low power than other less-efficient speakers.
Two-Way Speaker Design: use The Klipsch R-3650-W II uses a rigid 1" aluminum compression driver (tweeter) mated to an exclusive Tractrix Horn, combined with a 6.5" IMG woofer in a 2-way design.
- Tweeter: A 1" aluminum dome compression tweeter mated to a 6" square, pivoting Tractrix Horn, which disperses the sound 90° horizontally and 60° vertically into the room. The horn design dramatically increases efficiency by enabling the speaker to produce more output using less energy. The pivoting horn-loaded tweeter allows you to point the sound to a specific location, and has more controlled directivity than a conventional dome tweeter. The addition of a Linear Travel Suspension to the tweeter increases high frequency detail and smoothness.
- Woofer: The in-wall speaker employs a copper-colored 6.5" IMG (injection molded graphite) woofer. The solid IMG woofer cone has been strengthened for even more accurate bass reproduction.
Tweeter Attenuation Switch: If the speaker is installed in an acoustically bright room, such as a bathroom or a kitchen, you can attenuate the tweeter by -3dB, using the Tweeter Attenuation Switch, located on the front of the speaker.
ABS Basket/Frame: The R-3650-W II has a sturdy ABS basket and frame. The frame can be painted to match any decor.
SlimTrim Magnetic Grille: With an all new grille, the visible frame size is reduced by 90% and grille depth is reduced by 80% over the previous design, for a more edge-to-edge consistent look that blends in with the wall more attractively. The new aluminum, paintable, magnetic grille attaches tightly and securely with ease to virtually eliminate resonant distortion.
Speaker Terminals: The Klipsch R-3650-W II in-wall speaker features two spring-clip terminals which will accept bare speaker wire (up to 12-AWG) or pin-connectors. The spring-clip speaker terminals are color-coded (red/black) for easy identification between positive and negative.
Power Specifications Note: The manufacturer has specified the maximum power handling of this speaker as 50 watts RMS (200 W Peak). Klipsch has also published a recommended amplifier power specification as 100 watts.
New Or Pre-Existing Installation: The speaker can be installed in new or existing construction. It requires a cutout of 7.9375" (w) x 13.0625" (h), with a mounting depth of 3.6875". For new construction, purchase of the IK-650-W installation kit (714IK650W, sold separately) is highly recommended. For existing construction, the speaker should be installed in drywall at least 3/8" thick. A cardboard template is included to assist you in making the cutout.
IR Knockout: A 1/2" diameter knockout panel is provided in the lower left hand corner of the speaker frame for installing an IR sensor.
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.
Why did you buy this?
Recommended by your expert, Wade. [ OMER Feb 21, 2018 ]
I needed 1 speaker for the bedroom. [ Joe Mar 02, 2017 ]
quality, low profile [ Brian Oct 23, 2016 ]
These speakers were recommended by Crutchfield rep [ teresa Sep 01, 2016 ]
4 questions already asked
Really any speaker can be a center speaker. But i don't think it will spread out threw the room proper like the klipsch center speaker (Klipsch R-5502-W I). The 5502 really does spread the sound threw the room nicely. I know it's a bit more for the center, but I think it was well worth it. The center is like 2 speakers in one. [ cody Jul 01, 2017 ]
Thanks for your question. The dimensions I will list below, you can find this information on the product page under "Product Highlights", hope this helps. cutout dimensions: 7-15/16"W x 13-1/16"H mounting depth: 3-11/16" [ Kenny May 25, 2016 ] Staff
I don't why the couldn't, I used mine for wall install, I think it's more like the rectangular shape is for wall install, but I don't think it matters whether they are in wall or ceiling. If they fit the opening, I wouldn't bother to try anything else. Good Luck [ Dan Jan 19, 2016 ]
The Klipsch R-3650-W II does have slightly better high end performance due to a difference the tweeters on the two speakers. However, the R-3650-W are very similar and are at a special purchase price right now. [ Jeff Dec 02, 2013 ] Staff