Klipsch R-5650-S II
In-wall surround sound speaker
California customers: click here for your Proposition 65 warning.Please
Our take on the Klipsch R-5650-S II by Crutchfield's Marshall Chase
Get thrilling surround sound without cluttering your room with big, bulky speakers. The Klipsch® R-5650-S II speaker features a hideaway in-wall design and a grille you can paint to match your room's color scheme. Use this speaker as part of a full Klipsch surround sound system to enjoy clear, crisp wraparound effects from your favorite movies.
Speaker technology for dynamic performance
A rigid anodized aluminum woofer produces accurate bass and mid-bass. Two vertically stacked tweeters point in opposite directions. This clever design disperses ambient surround effects across a wide arc, for a diffuse soundfield that completely envelops the listener. It also allows this speaker to deliver great sound even if you place it in a less-than-ideal location.
Because high-frequency sounds are more directional than bass frequencies, it's especially important to target them toward your ears. Klipsch places their titanium tweeters inside a flared opening, known as a "horn." The array of two controlled dispersion horn tweeters angled away from each other yields an incredibly wide wave pattern, perfect for ambient movie sound or a realistic concert feel to music.
A slimmer chance of being seen
The '5650-S II keeps a low profile with its Slimtrim™ grille. The visible frame size is reduced by 90% and grille depth is reduced by 80% over previous designs, for a nearly flush finish that blends in beautifully. The paintable,aluminum, magnetic grille attaches securely with ease to virtually eliminate resonant distortion.
An optional in-wall bracket is recommended for installing the R-5650-S II in new construction.
- Tractrix® horn array with dual 1" titanium tweeters
- 6-1/2" Cerametallic woofer
- Wide Dispersion Surround Technology
- power handling: up to 50 watts RMS (200 watts peak)
- frequency response 60-23,000 Hz (±3dB)
- sensitivity 92 dB
- 8-ohm impedance
- IR receiver knock-out for remote repeater systems
- paintable Slimtrim® magnetic grille
- cutout dimensions: 8"W x 13"H
- mounting depth: 3-11/16"
- warranty: lifetime
- Our 60-day money-back guarantee
What's in the Box:
- In-wall speaker
- White metal mesh grille
- Cardboard template
- Owner's Manual (En/Fr/Sp)
I love these speakers. They were a breeze to install and they sound great. I debated this purchase for months and read a ton about in-wall speakers. The Crutchfield website was extremely helpful and I couldn't be more pleased. The sound quality is truly terrific.
Don B, Middletown, DE
Klipsch R-5650-S II Reviews
Average Customer Review(s):
Thanks for submitting your review
Features and Specs
|Quantity in Package||Single|
|Cutout Size||8 x 13|
|Power Range (Watts)||50|
|Connector Type||Spring Posts|
|Parts Warranty||Ltd. Lifetime|
|Labor Warranty||Ltd. Lifetime|
In-Wall Surround Speaker: The Klipsch R-5650-S in-wall speaker is designed specifically for surround use in home theater applications. Its unique, patent-pending horn array technology allows system designers to create enveloping sound fields and localized effects without disruption the home's decor. For the main left, right, and center speakers in the home theater system, the Klipsch R-5650-S-II (714R5650W2, sold separately) is recommended.
Wide Dispersion Surround Technology (WDST): The R-5650-S II draws listeners into the middle of the action through the use of Klipsch's proprietary Wide Dispersion Surround Technology (WDST). The careful alignment of the two controlled-directivity Tractrix Horn tweeters angled opposite of one another yields an incredibly wide dispersion pattern.
High Efficiency: The high-efficiency design of the Klipsch in-wall speakers allows you to get much more output than most in-wall and in-ceiling speakers. Due to the long speaker wire runs that are common in whole-house audio systems, the power coming from the amplifier is significantly reduced by the time it reaches the speakers. The 92dB efficiency of this speaker means it will play much louder at low power than other less-efficient speakers.
2-Way Speaker System: The Klipsch R-5650-S II in-wall speaker uses dual 1" Titanium compression drivers (tweeters) mated to dual 90° x 90° square Tractrix Horns, vertically stacked and skewed to maximize ambience, combined with a 6.5" Cerametallic woofer in a 2-way design.
- Tweeter: The two vertically-stacked, Tractrix Horn-loaded 1" Titanium dome compression tweeters are pointed in opposite directions to maximize diffusion, clarity, and efficiency. The horn design dramatically increases efficiency by enabling the speaker to produce more output using less energy. The addition of a Linear Travel Suspension to the tweeters increases high frequency detail and smoothness.
- Woofer: The copper-colored 6.5" Cerametallic woofer features a solid Aluminum diaphragm, anodized to add stiffness and provide perfect damping, that delivers increased rigidity for even tighter, more defined bass. The new integrated dust cap further strengthens the cone and helps ventilate the voice coil for increased driver durability.
Speaker Terminals: The speaker has a gold-plated pair of spring-loaded binding posts that can accept up to 12-gauge wire, single banana plugs, or pin connectors.
ABS Basket/Frame: The R-5650-S II has a sturdy ABS basket and frame. The frame can be painted to match any decor.
SlimTrim Magnetic Grille: With an all new grille, the visible frame size is reduced by 90% and grille depth is reduced by 80% over the previous design, for a more edge-to-edge consistent look that blends in with the wall more attractively. The new aluminum, paintable, magnetic grille attaches tightly and securely with ease to virtually eliminate resonant distortion.
Power Specifications Note: The manufacturer has specified the maximum power handling of this speaker as 50 watts RMS (200 W Peak). Klipsch has also published a recommended amplifier power specification as 100 watts.
Installation: The speaker can be installed in new or existing construction. It requires a cutout diameter of 8" wide x 13" high. The mounting flange around the speaker measures 0.75" wide (0.875" wide with grille). For new construction, purchase of the IK-650-W installation kit (714IK650W, sold separately) is highly recommended. For existing construction, the speaker should be installed in drywall (or other mounting surfaces) at least 3/8" thick.
IR Knockout: A 1/2" diameter knockout panel is provided in the lower left hand corner of the speaker frame for installing an IR sensor.
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.
Why did you buy this?
Great reviews. Goes with my other Klipsch speakers. Extremely happy with my Outdoor Klipsch speakers. [ DaddyE Dec 05, 2017 ]
Fabulous sound for an in-wall surround speaker. [ Jeff & Jun 18, 2017 ]
Hoping these pair well with the Klipsch RP280F towers as surround sound speakers. [ Brian May 27, 2016 ]
4 questions already asked
The spec says 9.3" wide. I believe that measurement is the width of the front baffle. If the front baffle is going to fit in between the studs it won't fit, but if you plan on using these as wall mounts where the baffle is on the face in front of the studs, you should have room. Take a look at the back picture and you can see the clips that hold them snug to your drywall are about a .5" inside the outside edge on both sides. [ Jacob Jan 05, 2017 ]
I suggest you contact Klipsch directly or go to their website. [ STEVEN A Jan 04, 2017 ]
Thanks for your question. The listed mounting depth is 3-11/16. You'll find this information on the product page under "Product Highlights". Hope that helps. [ Kenny Jun 21, 2016 ] Staff
that is how i'm using them. they are my back surrounds and i have towers for the front. they work perfect that way. however, i'm using them w/ a denon receiver. [ Chris May 11, 2016 ]
I purchased a pair of these speakers and a pair of the model with single tweeters. I use these as my side surround speakers and the single tweeter speaker as the rear surround in a 7.2 speaker arrangement. I really like the sound of the system. Very loud and very very clear. [ Chris May 10, 2016 ]
correction, 100 watts per channel [ CARL B May 10, 2016 ]
i am using as back surrounds with linn towersurrounds as front and linn center . pushing with 200 Watts per channel,works great. Hope this helps. [ CARL B May 10, 2016 ]
I used them as my rear speakers in a 5/1 system. They are AWESOME!!! [ STEVEN A May 10, 2016 ]
These are surround speakers. You need towers and twin subs for a full sound. I have reference line towers, twin subs and these for the surrounds. They work well for that purpose but not as main speakers. Crossovers set at 120 so subs doing the heavy lifting for these. [ Brian Oct 12, 2016 ]
Definitely! If you like music with lots of bass, like "Breakage" or "LX-one" you might want to go for a set of floorstanders. My current setup will rattle every door in my 2000 square foot home. [ MICHAEL R Sep 26, 2014 ]
Hi Chris, I wish I could give you a better answer then this one but I have not installed these speakers yet because the room there going into is a Theater room and Bar. This has been a long project because of the Bar being customed built. I really think these speakers will be a great set up with my two Subs. [ DONALD Sep 22, 2014 ]