Super-slim low-profile fixed wall mount for flat-panel TVs 32"-50"
Sanus ML11 Install
Sanus ML11 Motion
Sanus: ML11-B1 Super-Slim Mount for TV's 26"-46"
Our take on the Sanus ML11 by Crutchfield's Ralph Graves
The ultra-thin Sanus ML11 holds your flat-panel LCD or plasma TV a scant 9/16" from the wall — just about as close as you can get. It's the ideal wall-mount for many of the latest ultra-thin TVs. Yet this durable heavy-gauge design is strong enough to keep your TV firmly in place. The ML11-B1 can support a TV with a screen size of up to 50", and a weight of up to 100 lbs.
The mount's brackets can easily be shifted to the right or left, in case the wall studs are a little off-center. You can also make small adjustments after the mount is affixed to the wall to level it, or even change the height. And the handy ClickStand at the bottom of each vertical brace swings out to prop your mounted TV away from the wall, to make cable hookup a breeze — without removing the TV from the mount.
Will this mount work with my TV?
Use the Sanus MountFinder™ to see a list of mounts that work with your specific TV.
Where do I drill the holes?
Tell the Sanus HeightFinder™ Installation Assistant how high you want your TV, and it tells you exactly where to drill.
- fits most flat-panel plasma and LCD TVs from 32"-50"
- heavy-gauge steel construction with powder-coated finish
- supports up to 100 lbs.
- mount holds TV approximately 9/16" from wall
- built-in ClickStands hold mounted TV out from wall for cable installation
- stud-mounting required
- movable brackets for off-center stud placement
- includes all necessary hardware
- brackets: 22-3/4"W x 17-15/16"H x 5/8"D
- warranty: 10 years
- Our 60-day money-back guarantee
What's in the Box:
- Wall plate
- 2 TV mounting brackets
- Four M4 x 12mm bolts
- Four M4 x 30mm bolts
- Four M4 x 40mm bolts
- Four M5 x 12mm bolts
- Four M5 x 30mm bolts
- Four M5 x 40mm bolts
- Four M6 x 14mm bolts
- Four M6 x 40mm bolts
- Four M6 x 55mm bolts
- Four M8 x 16mm bolts
- Four M8 x 45mm bolts
- Four M8 x 60mm bolts
- Four M4/M5 flat-washers
- Four M6/M8 flat-washers
- 4 Lag bolts
- 4 Drywall anchors
- 4 Plastic inserts
- 4 Large spacers
- 4 Medium spacers
- 4 Small spacers
- Allen wrench
- Hex-head bit
- Instruction Manual
Meets our needs perfectly. Only problem we had with it was the need to shave off some of the plastic sleeve to allow the screws to engage.
B, Mars Hill, NC
Sanus ML11 Reviews
Average Customer Review(s):
Thanks for submitting your review
Overview: The Sanus VisionMount ML11-B1 Super Slim Low-Profile Wall Mount's innovative design emphasizes the sleek look of your ultra-thin LCD, plasma, or LED TVs by placing them just 0.55" from the wall. The Sanus ML11-B1 offers exclusive features that make it incredibly easy to install and use. ClickStand technology holds the bottom of the TV away from the wall for easy cable access without removing the TV from the mount. Convenient quick-release tabs on both mounting brackets stay hidden, but easily pull down to unlock the TV from the wall plate for cable access. The ProSet feature allows post-installation height and leveling micro-adjustments for perfect positioning after hanging. Lateral shift allows the TV to move left and right on the wall plate so it is placed exactly where you want it, even with off-center studs.
Compatibility: The ML11-B1 universal wall-mount bracket is designed to fit flat-panel plasma and LCD monitors from 32" to 50". The TV can have a maximum weight of 100 pounds.
Construction: The wall-mount bracket is made from solid heavy-gauge steel, with a durable powder coated black finish.
ProSet: ProSet post-installation height and leveling adjustments allow TV to be perfectly positioned after hanging. Once installed, your TV or wall-mounted furniture may not appear completely level with its surroundings. ProSet technology lets you make micro-adjustments to height and level after mounting to ensure perfect positioning.
ClickStand: The ML11-B1's ClickStand feature allows you to tilt the bottom of the TV outward (10-degrees/3.125-inches) and hold it there, giving you easy access to the back panel for connecting cables. Once all the cables have been plugged in, you can release the ClickStand and securely lock the TV into position on the wall plate.
Mounting: The wall plate must be mounted to wall studs or anchored to a brick, block, or concrete wall using the supplied lag bolts. The slots in the wall plate can accommodate a variety of stud spacing, allowing you to easily mount the TV to wall studs that are 16" or 24" on center. Once the wall plate is anchored to the wall studs and the monitor brackets (with the TV attached) are hooked onto the wall plate, the TV can slide left or right, allowing you to center the TV on the wall.
Note: Each monitor bracket has multiple bolt holes and can accommodate vertical hole spacing (on the back of the TV) from 3-15/16" (100mm) to 15-3/4" (400mm). Since the monitor brackets can slide on the wall plate, the horizontal hole spacing on the back of the TV can range from 2-9/16" (65mm) to 20" (508mm).
Steel Stud Mounting: If you wish to mount this Sanus wall mount in a building with steel stud walls, you will need the Sanus SSMK1 Steel Stud Mounting Kit. Steel stud walls are typically found in commercial applications, such as office buildings, warehouses, and condominiums.
Mounting Hardware/Bolt Pattern: The ML11-B1 comes with M4, M5, M6, and M8 bolts to mount the monitor brackets to your TV. Given the mounting bracket's range of motion, it will accommodate the following mounting bolt patterns:
- 100 x 100
- 200 x 100
- 200 x 200
- 300 x 200
- 300 x 300
- 400 x 200
- 400 x 300
- 400 x 400
- 500 x 300
Note: Additional hardware may be required for your specific model of TV. For example; shorter or longer screws, thicker or slimmer washers or spacers. These additional accessories can often be found at your local hardware store.
Installation Tools: The following tools are recommended for mounting the ML11-B1:
- Stud finder
- Phillips-head screwdriver
- Electric drill
- Drill bits: 3/16" (wood studs) and 5/16" (masonry)
Wall Plate Dimensions: W= 22.75", H = 4.875", D = 0.5625"
Monitor Bracket Dimensions: W = 2.5625", H = 18.1875", D = 0.5625"
Total Weight: 6.7 lbs
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.
Why did you buy this?
reviews [ Jacques Sep 24, 2018 ]
The most appealing feature is the slim profile and ease of install that many confirmed in their reviews. [ Rosa Aug 26, 2018 ]
prior good experience with Sanus TV wall mounts, low profile design, and price [ Erick Aug 01, 2018 ]
your recommendation [ Christopher Mar 08, 2018 ]
Came up with tv [ A Dec 16, 2017 ]
I trust Crutchfield will recommend the appropriate accessories for my application. [ James Dec 15, 2017 ]
slim mount [ Ryan Oct 24, 2017 ]
1 stop shopper [ Dr. Dennis Pago Aug 03, 2017 ]
I love same bracket before. I have two of them. Very thin, easy to install and even if you don't install the bracket leveled, there is a way to adjust your tv to make it leveled. I highly recommend this bracket. [ Mehrdad May 10, 2017 ]
Replacement [ Attila Nov 26, 2016 ]
High quality wall mount for my TV. [ Roger Nov 26, 2016 ]
Looking for a slim wall mount for my older Sony (KDL-55NX720), this will fit the bill. [ Jeff Sep 30, 2016 ]
thinner item [ mauro Jun 29, 2016 ]
The slim design [ Philip Jun 25, 2016 ]
Thinest fixed mount I could find for large TV [ Peter Jun 20, 2016 ]
Modern installation. [ Valerie May 04, 2016 ]
Recommended by the Crutchfield staff. [ Dominick Apr 14, 2016 ]
Recommended by my advisor. I wanted the ability to move the set laterally (depending on where the wall studs are located), and some tilt ability without sacrificing a thin profile. [ John Mar 17, 2016 ]
Have one already and love the super slim mount. [ Seyf Mar 15, 2016 ]
1 question already asked
My Sony 48" works [ WILLIAM P. Apr 08, 2017 ]