Sanus Classic MMF12b
Full-motion wall mount with articulating arm for 32"-47" TVs
Our take on the Sanus Classic MMF12b by Crutchfield's Ralph Graves
A tilting, swiveling mount for smaller TVs
The full-range Sanus Classic MMF12b mount gives you plenty of options for positioning your TV. It can hold it close to the wall, or extend it outward up to 12". You can swivel the TV left or right up to 45°, and tilt it up or down as far as 15° for optimal viewing. The mount's brackets can easily be shifted to the right or left, in case the wall studs are a little off-center. The MMF12b can support a TV with a screen size of up to 47", and a weight of up to 60 lbs.
Will this mount work with my TV?
Use the Sanus MountFinder™ to see a list of mounts that work with your specific TV.
Where do I drill the holes?
Tell the Sanus HeightFinder™ Installation Assistant how high you want your TV, and it tells you exactly where to drill.
- fits most flat-panel TVs from 32"-47"
- heavy-gauge steel construction
- supports up to 60 lbs.
- extends TV up to 12" from wall
- swivel range: ±45°
- tilt range: ±15°
- roll range: ±6°
- stud-mounting required
- movable brackets for off-center stud placement
- includes all necessary hardware
- conceals cables for a neat on-wall TV installation
- 18-3/4"W x 16-9/16"H x 3"D (with arm retracted)
- warranty: 5 years
- Our 60-day money-back guarantee
What's in the Box:
- Wall-plate/arm assembly
- 2 Veritcal TV brackets
- 2 Horizontal TV brackets
- Four M4 x 12mm bolts
- Four M4 x 35mm bolts
- Four M5 x 12mm bolts
- Four M5 x 35mm bolts
- Four M6 x 12mm Bolts
- Four M6 x 20mm bolts
- Four M6 x 35mm bolts
- Four M8 x 16mm bolts
- Four M8 x 20mm bolts
- Four M8 x 35mm bolts
- Four M4/M5 washers
- Four M6/M8 washers
- Two 5/16" x 2-3/4" lag bolts
- 2 Lat washers
- 2 Wall-anchors
- 8-32" x 3/8" locking screws
- 4 Spacers
- 3/15" Hex-key
- 5/32" Hex-key
- Instruction Manual
Sanos is always a good quality purchase! Love the crutchfield service too! Great assistance in finding the right tv bracket for my situation!!!
Kelly, Lexington Park, MD
Sanus Classic MMF12b Reviews
Average Customer Review(s):
Thanks for submitting your review
TV Capacity: The Sanus Classic Series MMF12B wall-mount bracket is designed to support flat-panel TVs from 32" to 47", weighing up to 60 lbs.
VESA Bolt Pattern: The Sanus MMF12B wall-mount bracket accommodates a horizontal hole spacing on back of the TV of 100mm-420mm and a vertical hole spacing of 100mm-400mm. The MMF12B comes with M4, M5, M6, and M8 size bolts of differing lengths to mount the bracket to your TV. It will accommodate the following VESA hole patterns in accordance with industry standards set by the Video Electronics Standards Association:
- 100mm x 100mm
- 200mm x 100mm
- 200mm x 200mm
- 300mm x 200mm
- 300mm x 300mm
- 400mm x 300mm
- 400mm x 400mm
Full-Motion Design: The Sanus Classic Series MMF12B's full-range of movement allows smooth extend, tilt, swivel, pan, and roll motions. The MMF12B extends from the wall (3"-12"), tilts up/down (+/-15°), swivels left/right (+/-45°), pans left/right (+/-90°), and rolls up/down(+/-6°) for easy viewing anywhere in the room.
Post-Installation Adjustments: Post-install leveling adjustments ensure your flat-panel TV is perfectly leveled & positioned.
Construction: The MMF12B bracket is constructed of heavy-gauge steel with a durable powder-coated black finish. This solid construction provides strength and increased safety.
Cable-Management: An in-arm cable management channel conceals cables the length of the mount for a seamless appearance.
Wall-Plate: The wall plate must be mounted to a wall stud or anchored to a brick, block, or concrete wall using the supplied lag bolts (and wall-anchors).
Installation Tools: The following tools are recommended for mounting the MMF12B:
- Tape measure
- Stud finder
- 7/32" Drill bit (for wood stud)
- 3/8" Drill bit (for masonry)
- 1/2" Socket wrench
- Screw driver
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.
Why did you buy this?
Used with other tvs. Easy to install... [ Paul Oct 05, 2018 ]
Recommended by crutchfield for my TV. After discussion with sales associate decided it was the best option for my particular situation! Thank you Crutchfield! [ Kelly Apr 22, 2018 ]
Recommended by Travis - Crutchfield advisor. [ Paul Feb 12, 2018 ]
I need a TV that pivots side to side for my 32" wide Samsung TV in the bedroom. [ Ronald Mar 20, 2017 ]
It is just the right size, mounting configuration, and capacity for my application. I liked the fact that Crutchfield carries a good selection of mounts, which makes it easy to choose just what is needed. In some of the 'Big Box' stores, the choice is limed to either very small or mega capacity mounts. [ Thomas Mar 13, 2017 ]
To mount my tv. [ Brett Dec 14, 2016 ]
Full motion for a bedroom/nook area in room. [ Daniel Dec 09, 2016 ]
Because it could be angled for the apartment it is going into. [ Jeffrey A. Oct 04, 2016 ]
It fits!!! [ NORMAN Aug 10, 2016 ]
perfect size for tv. great full motion. Peyton professional help [ Thomas Dec 26, 2015 ]
3 questions already asked
It's designed for any flat screen tv between 32 and 47". So it easily fit your ELDFT421. [ RICHARD Aug 20, 2017 ]
The Sunbrite models have proprietary screw holes and patterns so we only recommend using the Sunbrite mounting brackets with their TV models: http://www.crutchfield.com/g_33900/TV-Wall-Mounts.html?tp=1416#&nvpair=FFBrand|SunBriteTV I hope that helps! My Bio: http://www.crutchfield.com/Support/Bio.aspx?bio=5 [ Ryan May 06, 2016 ] Staff
We bought it for our 40" flat screen... I'm assuming it is made for larger tv's. [ Dawn Jan 08, 2016 ]