16-port desktop Gigabit Ethernet switch with PoE+ support
Our take on the Linksys LGS116P by Crutchfield's Kramer Crane
Expand your network with 16 blazing-fast wired connections
Today's connected homes and offices need lightning-quick access to on-demand streaming and data. The Linksys LGS116P is a high-speed Ethernet switch that offers Gigabit transfer speeds for up to 16 connected devices. It's perfect for sending high-bandwidth files between computers and other smart devices on your network. This switch also features Power over Ethernet Plus (PoE+), which provides power to compatible components via an Ethernet cable.
- Gigabit Ethernet switch with connections for up to 16 devices
- provides connection speeds up to 1,000 Mbps
- ports 1-8 feature Power over Ethernet Plus (PoE+) support for compatible devices
- Quality of Service (QoS) traffic prioritization ensures devices get the data access they need
- each auto-sensing port gives a connected device the most data it can handle
- easy plug-and-play setup
- front-panel link, speed, activity, and PoE status LED indicators
- 11"W x 1"H x 4-3/4"D
- weight: 1.81 lbs.
- warranty: lifetime
- Our 60-day money-back guarantee
What's in the Box:
- 16-Port desktop Gigabit PoE Switch
- External power supply (attached 46" DC cord)
- 58" AC power cord
- 2 Mounting screws
- 2 Wall anchors
- Documentation on CD-ROM
- Quick Installation Guide
Linksys LGS116P Reviews
Average Customer Review(s):
Thanks for submitting your review
16-Port Desktop Gigabit PoE Switch: The Linksys LGS116P is a 16-Port Gigabit PoE Switch. This unmanaged switch offers a quick and easy solution to extend your home or office network with a plug-and-play installation. It is also useful in transferring data across a local network at up to Gigabit speeds. You can connect the following devices to the LGS116P switch -
- Network Printers
- IP phone
- IP camera
- Other network devices
Standard Compliance: The Linksys LGS116P switch is compliant with IEEE 802.3, 802.3u, 802.3x, 802.3ab, 802.3az, 802.3af, and 802.3at (PoE+).
Intelligent Filtering: The switch acts as a repeater which regenerates data signals as they pass through it. This feature acts as a safeguard to deter data loss and ensure that transmissions arrive securely at their destinations. Moreover, a switch is capable of intelligent filtering of data based on source and destination as compared to the repeater which can only regenerate the signal without checking its recipients.
QoS (Quality of Service) Traffic Prioritization: QoS (Quality of Service) prioritizes traffic to particular devices or activities & maintain mission-critical data throughput regardless of network congestion.
Auto-Sensing Gigabit Ports: It has built-in full-duplex 10/100/1000 switch to connect your wired Ethernet devices together at up to Gigabit speeds. Gigabit performance minimizes transfer times and streams high-bandwidth files to connected devices without interference. The Auto-Sensing ports automatically optimize speed for each connected device.
Power Over Ethernet (PoE): Integrated Power Over Ethernet (PoE) makes installation simple and inexpensive by eliminating the need for additional power cables and nearby power outlets. Power over Ethernet (PoE) is a technology that enables an Ethernet network cable to deliver both data and power. You can plug a PoE device into the switch's 1-8 ports. The switch only supports IEEE 802.3af and IEEE 802.3at. Any PoE devices not supporting these standards will not be powered ON by the switch.
PoE Prioritization: The Linksys LGS116P has 80W dedicated PoE power budget for the entire switch. The switch has a feature called PoE prioritization where power is provided based on port priority for PoE devices connected to the PoE ports. This is only applicable for those ports (1-8) that have a PoE device connected to it. This follows the criteria below -
- Port ID1 has higher priority
- The higher the Port ID, the lower the priority
- Rebooting the switch reprioritizes PoE per port
Note: For example is if all three PoE devices have maxed out the power budget on the switch. When a fourth PoE device connects, since it exceeds the power budget, the connection is declined and Port 4 will not provide power to a PoE device. However unplugging Port 1 will then provide power to Port 4 for the PoE device connected to it. If the PoE device is reconnected back to Port 1, Port 1 remains OFF. In order to restore power to Port 1 for the PoE device either unplug PoE device from Port 4 or reboot the switch. Rebooting the switch prioritizes PoE for each port all over again.
Power Requirements: The Linksys LGS116P comes with an external AC power supply (100-240V ~ 50/60Hz) and detachable 58" AC power cord that will need to be plugged into an AC wall outlet or surge protector.
Mounting Options: The Linksys LGS116P can be simply placed on a tabletop or desktop horizontally. It can also be wall-mounted vertically thanks to built-in keyhole slots.
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.
Why did you buy this?
Needed POE and high speed wired connections [ JANICE Oct 24, 2017 ]