About the Focal ES 130K
Meticulous design and construction
Focal incorporates their Tuned Mass Damper (TMD®) rubber surround for excellent woofer control and minimal distortion.
Meticulous design and construction
Handmade in France, the Elite K2 Power Series ES 130K 5-1/4" component speaker system is the culmination of Focal's passion for perfect sound, exceptional standards, and technological advances. Focal's sound gurus engaged in intensive listening sessions designing this line of speakers so that you hear uncanny realism, sweeping dynamics, and breathtaking depth in your music.
A classic woofer with a new twist
The ES 130K uses Focal's classic "W" sandwich cone woofer design to reproduce your audio with incredible accuracy. The nimble Kevlar and glass-fiber woofers demonstrate the control needed to play delicate classical passages, yet they'll handle the power needed to drive your bass-heavy tracks with authority. Focal adds a new Tuned Mass Damper (TMD®) rubber surround which minimizes harmonic distortion for the cleanest midrange possible.
A redesigned tweeter
The separate 13/16" tweeter employs a one-of-a-kind "M"-shaped inverted aramid fiber dome design that does a better job than ever of dispersing the highs with remarkable precision, all the way up to 22,000 Hz. The K2 Power crossovers use hand-made components developed by Focal to deliver an ideal blend of the highs and lows for a dynamic stereo image. Three levels of tweeter control let you dial in the sound to your car's environment.
Installation note: You'll need a pair of our universal backstraps to install the tweeters in the factory locations.
Product highlights:
- component speaker system includes two 5-1/4" woofers, 2 tweeters, 2 external crossovers, and 2 woofer grilles
- K2 Kevlar sandwich woofer cone
- Tuned Mass Damper (TMD®) rubber surround
- 13/16" aramid fiber "M"-shaped inverted-dome tweeter
- 2-way external crossover with 3 tweeter level settings
- 4-ohm impedance
- power range: handles up to 80 watts RMS (160 watts peak power)
- frequency response: 65-22,000 Hz
- sensitivity: 90 dB at 2.83 V
- woofer mounting depth: 2-3/8"
- grilles included
- warranty: 1 year
- MFR # ES 130K
What's in the box:
- Two woofers
- Two inverted dome tweeters (with attached 20" length of speaker wire)
- 2 Crossover networks
- 2 Tweeter flush mount cups (installed)
- 2 Tweeter angle mount cups
- 2 Dome protective washers
- 2 Woofer grilles
- 2 Woofer grille mounting rings
- 2 Woofer mounting gaskets
- 8 Speed clips
- Four 3/4" Self-tapping screws
- Eight 1-1/8" Self-tapping screws
- Owner's manual (English/ French/ German/ Italian/ Spanish/ Portuguese/ Dutch/ Russian)
- 2 Focal window stickers
Customer reviews for Focal ES 130K
Loading...
Loading reviews...
Average review:
5.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Focal ES 130K
Features & specs
General | ||
---|---|---|
Speaker Size | 5 | |
Design | 2-way | |
Tweeter Design | M-Shaped Inverted Dome | |
Impedance (Ohms) | 4 | |
Tweeter Composition | Aramid Fiber | |
Woofer Composition | K2 Kevlar Sandwich | |
Woofer Surround | Butyl Rubber | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Specifications | ||
Sensitivity (1W at 1 meter) | 87.2 | |
Sensitivity at 2.83 volts | 90 | |
Frequency Response | 65 - 22k Hz | |
Minimum RMS Wattage | --- | |
Maximum RMS Wattage | 80 | |
Peak Power Handling (Watts) | 160 | |
Top-mount Depth (Inches) | 2 7/16 | |
Bottom-mount Depth (Inches) | 2 5/8 | |
Cutout Diameter or Length (inches) | 4 9/16 | |
Mounting Height (Inches) | 0.389 | |
Frame Width | 5.1 | |
Frame Length | 5.1 |
Product Research
Woofer
Tweeter
Crossover
Dimensions
Woofer
K2 Cone: The woofer cone is a sandwich composite consisting of a foam core, a structural glass fiber bottom layer, and a Kevlar top layer. This combination of materials results in a rigid, light weight cone with excellent damping characteristics.
Surround: Focal's patented butyl rubber TMD (Tuned Mass Damper) surround helps control unwanted resonances, providing a clean and neutral midrange with very low harmonic distortion.
Voice Coil: The voice coil is wound around a 1" diameter low-mass Kapton former, ensuring no coil deformation.
Tweeter
Inverted Dome: The "M" profile, Aramid fiber, inverted dome tweeter is designed to increase precision at very high frequencies. The push-pull motor also damps acoustic resonances on the back of the membrane and extends the low end of the frequency response.
Mounting Options: The tweeter can be surface or flush mounted using the included adapters, or the trim ring can be removed and the protective washers added for mounting in a factory tweeter location. The included angled cup allows surface mounting at one of two angles; approximately 60° and approximately 40°.
Crossover
Components: Focal uses audiophile grade polypropylene capacitors and air core inductors to ensure high definition and a dynamic sound quality. Thermal camera imaging is used to optimize component power dissipation, improve reliability, and lower temperature.
Slope: The high-pass crossover slope is 12 dB/octave. A switch allows you to choose between 12 dB/octave and 6 dB/octave slopes for the low-pass crossover. The crossover point for both is 3,500 Hz.
Tweeter Level: A three position switch on the crossover allows you to adjust the output level of the tweeter to -3 dB, 0 dB, or +3 dB.
Wiring: The inputs and outputs are screw terminals; they will accept bare wire or spade connectors up to 0.315" wide.
Dimensions
Tweeter:
Flush Mount | Surface Mount 40° | Surface Mount 60° | |
---|---|---|---|
Mounting Height | 0.45" | 1.7" | 2" |
Mounting Depth | 0.43" | screw depth | screw depth |
Frame Diameter | 2.045" | N/A | N/A |
Cutout Diameter | 1.575" | N/A | N/A |
Frame Width | N/A | 2.075" | 2.075" |
Frame Depth | N/A | 2.138" | 1.932" |
Crossover: The crossover dimensions are:
- Width: 4-3/8"
- Height: 1-1/4"
- Depth: 3"
The Focal ES 130K replaces these items
Focal K2 Power 130KR
- K2 composite woofer cone (Aramid, foam, and glass fiber)
- 1-3/4" woven Aramid fiber inverted-dome tweeter
- 6-70 watts RMS power range
Loading...
Loading accessories...
Customer Q&A
2 questions already asked
Loading...
Loading articles...
Great sounding speakers. Very true and articulate. Expensive but worth the extra money (IMO). Solid construction and packaging.
Randy from Lake Havasu City, AZ