Cerwin Vega CVM-1022
Compact 10-channel mixer
Our take on the Cerwin Vega CVM-1022 by Crutchfield's Bob Bihlmayer
History of innovation
Cerwin Vega has been building audio systems for homes, cars, movie theaters, and concert halls for over 50 years. Their engineers put this experience and knowledge to work when they created the CVM line of versatile, professional-quality mixers.
Cerwin Vega's CVM-1022 mixer features four XLR microphone inputs, two mono and four stereo line inputs, plus stereo RCA inputs for your portable devices. Convenient, switchable phantom power allows easy use of condenser mics. Separate auxiliary and effects sends give you extra routing capability and the ability to add color and depth to your sound. Your sounds reach the outside world through 1/4" main outputs, stereo RCA outputs, balanced 1/4-inch Control Room outputs, and a 1/4-inch headphone jack.
Control and color your sound
Shape your signal with the CVM-1022's controls. Each channel features 3-band EQ with up to 15 dB of boost/cut, while the the microphone channels also feature a 75 Hz low-cut filter that eliminates low-frequency rumble. The Pan control on the mono channels and the Balance controls on the stereo channels allow you to precisely position your sounds in the mix. Each channel features AUX and EFX knobs to tweak the amount of signal sent to an individual bus, along with a Gain control to adjust the input level. Individual LEVEL controls govern the output of the channels, the main output, and the headphone/control room output.
Ready to go
The compact CVM-1022 mixer will handle a full range of situations, and its flexible controls and interface are adaptable to any setting. Whatever your demands, the Cerwin Vega CVM-1022 is ready to meet your musical needs.
- 10-channel mixer
- 2 mono and 4 stereo line inputs with 4 XLR microphone inputs
- left and right 1/4" main outputs
- TAPE IN and REC OUT stereo RCA jacks
- 1/4" stereo headphone jack and unbalanced 1/4" control room output
- 3-band EQ for each channel (80, 2500, 12000 Hz)
- individual channel and main level control
- gain control for microphone and line inputs
- low cut switch (high-pass filter at 75Hz) eliminates rumble
- AUX and EFX controls for each channel adjust the level of the signal sent to the respective bus
- PAN and BALANCE controls adjust position and level in the stereo mix
- switchable phantom power (+48V) allows use of condenser microphones
- weight: 6.2 lbs.
- dimensions: 9-13/16"W x 3"H x 11-7/16"D
- warranty: 3 years
- Our 60-day money-back guarantee
What's in the Box:
- Analog mixer
- AC power cord
It's very simple layout and easy to use it. Sound quality is good and I'll recommend it to buy with the price
Cerwin Vega CVM-1022 Reviews
Average Customer Review(s):
Thanks for submitting your review
Features and Specs
|Line inputs||10 x 1/4"|
|Monitors||2 x 1/4"|
CVM Series Analog Mixer: The Cerwin-Vega CVM-1022 10ch analog mixer is part of Cerwin-Vega's CVM line-up of professional audio mixers which are designed for live performance and recording applications. Built using premium-grade components that deliver precision audio performance, the mixer features a commercial-grade metal housing for reliability and longevity. The mixer's clear markings and color-coordinated knobs also allow for intuitive operation, including fast adjustment and easy operation in low-light situations. Its compact to fit almost any work area and built-tough to travel from venue to venue.
10 Input Channels: The Cerwin-Vega CVM-1022 provides ten mixing channels.
- Channels 1 & 2: 3-pin XLR-type connectors are used for balanced low impedance microphone inputs. Standard 1/4" phone jacks are used for balanced or unbalanced line level signals, like electronic keyboards, synthesizers, turntables, tape-decks, and line outputs from other mixers.
- Channels 3/4: 3-pin XLR-type connectors are used for balanced low impedance microphone inputs. Standard 1/4" phone jacks are used for unbalanced stereo line inputs.
- Channels 5/6: 3-pin XLR-type connectors are used for balanced low impedance microphone inputs. Standard 1/4" phone jacks are used for unbalanced stereo line inputs.
- Channels 7/8: Standard 1/4" phone jacks and RCA-pin jacks are used for unbalanced stereo line inputs.
- Channels 9/10: Standard 1/4" phone jacks are used for unbalanced stereo line inputs.
Main & Monitoring Outputs: The mixer uses dual 1/4" phone jacks to deliver stereo output of the mixed signal to your power amplifier driving your main speakers or powered speakers. The mixer also includes 1/4" phone jacks to output a stereo mixed signal to your monitoring system. In addition, there is a 1/4" headphone jack to monitor the mixed signal with a pair of headphones.
Phantom Power: Phantom power (+48V) switch for easy connection of condenser microphones that typically require an external power supply.Gain & Level Control: The Cerwin-Vega CVM-1022 features the following Gain and Level controls.
- Gain Control: According to the level of the input signal, use this Gain control knob to adjust the input to an appropriate level for each channel. The best balance of S/N and dynamic range will be achieved if you adjust the Gain control so that the peak indicator lights occasionally. This control adjusts the channel's mic input sensitivity between -50dB and -6dB and the line input sensitivity between -30dB and +14dB. The mono/stereo combination input channels have a sensitivity of +20dB to -20dB.
- Channel Level Volume: The Channel Level Volume determines the level of the signal that is sent from each input channel to the master mixing and effect buses. It is the settings of the input channel faders that determine the mix, or the balance of sound levels between the instruments or other sources connected to the inputs. When a channel is not being used, its volume should be set at the minimum position to prevent the addition of unwanted noise to the main program signal.
- Master Volume: This volume adjusts the final level of the combined signals from all channels. A vertical row of ten LED shows the continuous output level of mixer's MAIN Output (L/R).
Peak LED Indicators: The Peak LED indicators let you check the level of the signal input to each channel. The peak indicator lights when the input signal reaches 5dB below the channel's clipping point. This indicator shows the level of the Post-EQ / pre-fader signal. If the Peak indicator lights more than briefly on high-level transients, you should use the Gain control to decrease the input sensitivity of the channel. If this does not work, reduce the output level of the connected source.
3-Band EQ: The 3-Band channel equalizer is designed to control the High, Mid, and Low frequencies of each input channel.
|High||+/-15 dB||12 kHz||Shelving|
|Mid||+/-12 dB||2.5 kHz||Peaking|
|Low||+ -15 dB||80Hz||Shelving|
High Pass Filter: The Low Cut (HPF) switch toggles the filter, with a cut-off frequency at 75Hz, to eliminate background microphone rumble.
Pan & Balance: The Cerwin-Vega CVM-1022 analog mixer provides Pan controls for mono channels and balance for stereo channels.
- Pan: This control pans the channel signal across the master L and R buses, thus determining the perceived position of the sound from that channel in the output stereo sound field. If a PAN control is set all the way to the left, for example, the sound from that channel will be heard from the left speaker system only. If it is set all the way to the right, the sound will be heard from the right speaker system only. Intermediate settings will cause the sound to appear at corresponding locations in the stereo soundfield.
- Balance: This control adjusts the balance or the L/R position of the stereo input signal. Turning the BALANCE control to the left of center moves the apparent source toward the MAIN L moves the source toward the MAIN R bus.
Insert/Aux/Effects: The Insert, AUX and EFX sends (all 1/4") allow
connection to external dynamics, equalization and effects units giving a high
level of customization and returned to the mixer through its Return inputs which
consists of unbalanced 1/4" phone-type line input jacks. The signal received by
these jacks is sent to the MAIN bus and
AUX bus. These jacks are typically used to receive a return signal from an external effect (reverb, delay, etc.). You can use the AUX and EFX controls to adjust the level of the signal sent to the respective bus. The Aux control is placed before the channel volume; it will not be affected by the channel level volume. Since the EFX control is placed after the channel fader, the signal level will be affected by the channel fader setting.
Tape In/Record Output: The mixer also features TAPE In and REC Out RCA jacks, which enable users to directly connect to a CD/MP3 player or an audio recorder. The Tape In consists of RCA pin jacks that input a stereo sound source; use these jacks when you want to connect a CD or DAT directly to the mixer for monitoring. The REC Out consists of stereo RCA pin jacks and send the pre-fader signal from the mixer's master bus for recording by a connected tape deck.
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.