Skip Navigation

Infinity Kappa 652.7i

6-3/4" 2-way car speakers

6 Reviews

Find what fits your vehicle

 
 
 
 

Can't find your exact vehicle?

Item # 1086527I

This item is no longer available.

Shop all 6", 6-1/2" & 6-3/4" Speakers

Overview

Our take on the Infinity Kappa 652.7i

Infinity Kappa speakers incorporate the latest technology to provide you with outstanding sound reproduction. And, thanks to Infinity's innovative low-impedance design, they're built for high efficiency as well.

Infinity Kappa speakers incorporate the latest technology to provide you with outstanding sound reproduction. And, thanks to Infinity's innovative low-impedance design, they're built for high efficiency as well.

The Kappa 652.7i 6-3/4" speaker features a super-stiff woofer cone to minimize flexing that can cause distortion. The Plus One cone design offers a larger surface area than other 6-3/4" speakers, for improved bass output and efficiency. The woofer's powerful, compact neodymium magnets weigh much less than traditional magnets — a nice feature when you're trying to save weight in your high-performance vehicle.

Infinity uses the same type of tweeter found in many of their popular home speakers, so you'll hear the music the way it was recorded, with minimal coloration or distortion. The tweeter also pivots, so you can adjust its output for a perfect stereo image.

The computer-optimized outboard crossover employs audiophile-grade components to separate highs and lows so that the woofer and tweeter work together perfectly. A tweeter level control allows you to tailor the tweeter's response for perfect balance.

Important Note: These Infinity speakers use a low impedance design to pull more power safely from your car stereo or amplifier. This design is compatible with all factory and aftermarket stereos.


Priced per pair

Product Highlights:

  • 2-way 6-3/4" speakers (pair)
  • 2-ohm impedance for extra power (compatible with all factory or aftermarket car stereos)
  • Plus One woven-glass-fiber woofer cone with hi-roll rubber surround
  • rotating UniPivot M.M.D. dome tweeter
  • computer-optimized outboard crossover with tweeter level control
  • power range: 2-75 watts RMS (225 watts peak power)
  • frequency response: 45-25,000 Hz
  • sensitivity: 95 dB
  • top-mount depth: 2-3/16"
  • warranty: 3 years
  • Our 60-day money-back guarantee

What's in the Box:

  • Two 2-way speakers
  • 2 Grilles
  • 2 Grille rings
  • 2 In-line crossovers
  • Eight 1" self-tapping screws
  • 8 Speed clips
  • Instructions
  • Warranty card

The speakers are great, but do not fit the doors in my 2003 PT Cruiser w/o major work. The hole in the door is 6" and the speaker mounting hole diameter is 6". A bracket is required; they provided one, but it doesn't fit these speakers. I'm going to make my own.

reevescajr, Knoxville, TN

Reviews

Infinity Kappa 652.7i Reviews

Average Customer Review(s):

(6 Reviews)
rewards card
Great Gear Giveaway

Submit a review and enter to win a $350 rewards card

Review this product

Thanks for submitting your review

Most reviews are processed and published within 5 business days. You will receive a confirmation email once your review has been published.

Your Review

Use the stars below to rate the overall product on a scale of 1-5
1500
Upload your photos

Not visible. Email associated with order.
(e.g., Charlottesville, VA)

Additional Fields (optional)

500
500

By submitting this review, you agree to our terms and review guidelines.

Filter by rating

Customer photos


<< >>
Details

Hands-on research

Features and Specs

General
Speaker Size
Design 2-way
Tweeter Design Dome
Impedance (Ohms) 2
Tweeter Composition M.M.D.
Woofer Composition Woven-glass-fiber
Woofer Surround Rubber
Parts Warranty 3 Years
Labor Warranty 3 Years
Specifications
Sensitivity (1W at 1 meter) N/A
Sensitivity at 2.83 volts 95
Frequency Response 45 - 25k Hz
Minimum RMS Wattage 2
Maximum RMS Wattage 75
Peak Power Handling (Watts) 225
Top-mount Depth (Inches) 2 3/16
Bottom-mount Depth (Inches) N/A
Cutout Diameter or Length (inches) 5 11/16

Product Research

Features

Plus One+ Woven-Glass-Fiber Woofer Cones: The Plus One speakers use cones approximately 30% larger than other speakers of the same size. This is accomplished by using a new basket design and hi-roll surround. The Plus One design offers greater bass output and a significant increase in efficiency.

Woven-Glass-Fiber Woofer Cones: This woven-glass-fiber material is very light and extremely stiff, minimizing cone flex. This results in very low distortion and improved clarity.

Motor Structure: The new Kappas use a Neodymium motor structure with an integrated heat sink. This design provides a massive amount of energy while minimizing mounting depth and magnet diameter. The integrated heat sink cools the motor structure efficiently, thus increasing power handling while reducing distortion.

Edge Driven MMD Dome Tweeters: Each speaker has an Edge-driven MMD (Metal Matrix Diaphragm) dome tweeter. The benefit is increased power handling and reduced distortion at high output. This technology also allows for better integration with the mid/woofer. The tweeter has an adjustable output level, +0 dB (flat) and +3 dB.

UniPivot Tweeter: The tweeter is angled and can be rotated about 270° after installation. This allows you to direct the tweeters toward the listeners, very useful for speakers mounted low in a door.

SLIT High-Output Design: This high output 2 ohm design extracts every watt from today's amplifiers and hi powered receivers, increasing overall system output and efficiency (relative to 4 ohm speakers).

Crossovers: Kappa speakers include computer-optimized, voice-matched crossovers, using audiophile quality air core inductors and polypropylene capacitors.

Crossover Connections: Each crossover has a 12" input lead terminated with bare wire and two 19" output leads, one for the woofer and one for the tweeter, terminated with female quick-slides. The female quick-slides connect to the male quick-slides on the speaker. The positive terminal on the woofer is 0.248" and the negative is 0.191". The positive terminal on the tweeter is 0.205" and the negative is 0.111".

Crossover Dimensions: L=3.615", W=1.735", H=1.107"

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Accessories