Features

16" High Output Woofer: The SVS PB16-Ultra power subwoofer employs a light and rigid 16" Ultra driver cone which consists of a premium fiberglass resin composite with optimal stiffness to mass ratio to maximize movement of air and sonic energy without ever distorting or losing control. Pushing the driver are four massive, dedicated toroidal ferrite magnets that unleash a staggering 95mm peak to peak Xmech excursion (82mm Xmax) and the highest levels of motor force and palpable SPLs. An 8" edge wound voice coil ensures ultra-low distortion and pinpoint control at the highest drive levels resulting in incredible output and low frequency extension. By nature, larger drivers are more difficult to control, but the unprecedented voice coil design ensures accuracy in frequency response and speed in transients without ever sounding boomy.

STA-1500D Sledge Amplifier: A conservatively rated 1,500 watts continuous / 5,000 watts peak power Sledge STA-1500D amplifier pushes the 16" driver to extreme levels of performance. This discrete MOSFET amplifier delivers astonishing levels of effortless, distortion-free power. This enormous amount of power is harnessed and controlled by an advanced 50MHz Analog Devices Audio DSP with 56-bit filtering to handle the nearly limitless power, only unleashing the perfect amount of low frequency energy at just the right time.

Acoustically Inert MDF Enclosure: The SVS PB16-Ultra powered subwoofer features a rigid MDF (Medium Density Fiberboard) cabinet with a double thick MDF front baffle and rigid internal bracing to support the massive drive unit and to ensure an acoustically inert environment. The highly reinforced internal design eliminates any chance of coloration or resonance from the cabinet, even when the deepest low frequencies are played at reference sound pressure levels. Screw-in rubber feet and a non-resonant steel mesh grille further resist unwanted distortion or coloration caused by vibration.

Control Types: The SVS PB16-Ultra Subwoofer can be controlled from the new SVS Mobile App, an included IR Remote Control, or via the front-panel for unprecedented flexibility when optimizing performance for room layout, speakers, system set-up and more.

• Subwoofer App Control: The SVS subwoofer app for Apple iOS 8.0+ & Android OS 4.3+ controls all DSP functions and conveniently stores custom presets. The app lets you fine tune the powered subwoofer from your smartphone or tablet via a wireless Bluetooth connection. With a few simple adjustments, you can eliminate boomy spots, set crossover frequencies and make other adjustments to get the deepest, tightest, most accurate and room-energizing bass experience possible from The SVS PB16-Ultra powered subwoofer.  For added convenience, two-way feedback shows updates in real-time on both the app and subwoofer interface. The SVS subwoofer app is the only way to access all of the advanced control features available on the PB16-Ultra and it is the most convenient option for controlling every feature.
• IR Remote: The included IR remote can be used to adjust nearly every one of the advanced subwoofer control settings with two-way feedback on the front panel display.
• Front-Panel: The front panel features an intuitive user interface with simplified controls that can be used to adjust the majority of the advanced subwoofer control settings.

Control Functions: The following control functions are available.

• Volume: The Volume Control (-60 to 0dB in 1dB/step) affects how loud the powered subwoofer plays. It should be adjusted to match the output level of your loudspeakers.
• Low Pass Filter: The Low Pass Filter sets the frequency and slope for the low frequencies that will be played by the powered subwoofer. Frequency choices include 30-200Hz in 1kHz increments Four Slope choices are available; 6 dB, 12 dB, 18 dB, and 24 dB per octave. You can disable the Low Pass Filter, if your AV receiver features an LFE output and built-in bass management for the subwoofer.
• Phase Adjustment: Solves sound wave cancellation issues at specific frequencies and perfectly aligns the arrival of output from speakers and subwoofers to your listening position. Normally set to 0° if the subwoofer is near the main speakers. Adjusting Phase (0°-180° in 1 degree steps) shifts timing of the subwoofer output to align with the main speakers or additional subwoofers.
• Polarity: In some cases, reversing polarity solves dips or humps at the crossover frequency between a subwoofer and speaker and can be used to fix bass nulls or overly boomy spots in the listening area. Reversing the electrical polarity of the subwoofer amplifier makes it so the woofer moves in when speaker drivers move out and is normally set to positive.
• Parametric EQ: Powerful tool for removing peaks and dips in your listening area, and for creating custom subwoofer output based on personal listening preferences. Allows you to set the desired center frequency (20, 22, 25, 28, 30-200Hz in 1Hz steps) of the filter, increase or decrease the SPL dB (-12 to +6dB in 1dB steps) of the filter, or adjust the bandwidth (0.2-10.0 in 0.1 steps) of the filter.
• Room Gain Compensation: The Room Gain Compensation function allows the subwoofer to be set to compensate for the increase in low frequency sound based upon the size of the room, if it is felt there is too much bass. Small rooms will have a greater increase in low frequency sound than larger rooms. There is no need to use this control unless it is felt there is too much low frequency energy being generated in the listening environment. The  RGC Frequency can be set to 25, 31, or 40Hz. The RGC Slope can be set to  6dB or 12dB.
• Custom Presets: Allows up to three pre-saved settings for movie, music and custom. This enables easy switching to optimize your PB16-Ultras output and settings based on your specific listening preferences with different kinds of content.

Balanced & Unbalanced Connectivity: There are two types of input & output connectors on the PB16-Ultra powered sub; Balanced XLR and unbalanced RCA. There are Left/Right input and output channels for both types of connectors.

• Inputs: For a single mono input connection to a home theater receiver with an LFE output, use the powered sub's right input. For stereo receivers without an LFE input, use both the L/R inputs.
• Outputs: The output connectors are typically used to either daisy-chain additional subwoofers with single or dual unfiltered outputs, or as the input to a power amplifier for the Left and Right main channels after using the High Pass Filter and Delay functions with two channel analog preamps.

Auto/Standby & On Switch: If this switch is set to "Auto/Standby", it will automatically turn-on the powered subwoofer in the presence of an audio signal. If no signal is present for a period of several minutes, the powered subwoofer will enter "Standby" mode, where power consumption will be less than 0.5 watts. If this switch is set to "On", the amplifier will remain on continuously and will not enter "Standby" mode.

Trigger Input: The powered sub's 3.5mm Trigger Input (3V-12V) will automatically turn the subwoofer on/off when a signal is sent to it from another component in the system (typically the pre/pro or AV receiver). The other component in the system must be equipped with a trigger output feature and requires a TS 1/8" mono-minijack cable (sold separately)

Placement Options: If possible, place the subwoofer near the front stage, for best blending with the front and center loudspeaker channels.

• Corner Placement: Corner placement will accommodate most rooms and will reduce the chances for encountering a null (an acoustic cancellation in the bass response) at the listening position. If your AV receiver equalizes the subwoofer channel during auto-set-up, corner placement will often provide the best overall performance.
• Other Placement Options: If corner placement sound excessively boomy, then try moving the subwoofer to other available locations along the front stage, listening for the best balance of output and a smooth accurate response. Always redo the auto-set-up of your AV receiver after moving the subwoofer to a different location to ensure the acoustic distance and calibration level are set correctly.
• Dual Subs: To maximize the bass output and impact of your home theater, two PB16-Ultra(s) can be paired; one on either side of your room.