About the ProSpec SPA-POWER9
Power plant for your spa's entertainment system
Power plant for your spa's entertainment system
ProSpec's SPA-POWER9 regulated power supply boast an IPx5 water-resistant rating to withstand the toughest conditions while providing electricity to the 12-volt stereo in your spa or hot tub. It's UL-rated and offers up to 10 amps of output current, so it's got plenty of juice to power up your entertainment while you relax.
Protection and connections
In addition to its tough outer shell, the SPA-POWER9 power supply includes protection against short circuits, over-current, and over-temperature. This power supply's input section includes a proprietary plug to select spa pack power boxes (sold separately). Or you can cut this plug off and wire the SPA-POWER9 directly to AC power. The output section includes two pre-crimped slide connectors to attach to your spa stereo.
Note: Unless you have experience, you should consult with an electrician for this installation.
Product highlights:
- water-resistant AC-to-DC power supply for spa stereos
- includes proprietary input connector for Spa Pack power box (sold separately) or can be directly hard-wired to AC power
- IPx5 rating
- wall/panel mountable
- dimensions: 12" H x 5-5/8" W x 3" D
- warranty: 1 year
- MFR # SPA-POWER9
What's in the box:
ProSpec SPA-POWER9 owner's manual
- Power supply w/attached 70" input cable and 60" output cable
- Four 3/4" Phillips-head screws
- Four lock-washers
- Four flat-washers
- Owner's manual
See the difference between "Open Box" and "Scratch & Dent" Outlet items
Customer reviews for ProSpec SPA-POWER9
Loading...
Loading reviews...
Average review:
5.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the ProSpec SPA-POWER9
Product Research
Features
Overview: The Spa-Power9 power supply lets you power your 12 VDC audio equipment for your spa or hot tub from AC house current, with up to 10 amps of current available at 13.8 VDC. The Spa-Power9 comes with a proprietary 70" Input connector designed to plug directly into a Spa Pack power box (sold separately) or the connector can be cut off and hardwired directly to AC power. DC power is output through a 60" positive and negative wire set, with pre-crimped slip-on ends, that connect to your 12 VDC powered audio equipment. The Spa-Power9's water-resistant housing carries an IPX5 rating and is internally fuse protected.
Specifications:
- Output:
- DC Voltage: 13.8V
- Rated Current: 10A
- Rated Power: 130W
- Input:
- Voltage: 120V / 60Hz
- Efficiency: 80%
- AC Current: 2.5A
- Protection:
- Overload: Constant current limiting, recovers automatically after fault condition is removed.
- Over Temperature: Shut down O/P voltage, recovers automatically after temperature goes down.
Loading...
Loading accessories...
Customer Q&A
4 questions already asked
Loading...
Loading articles...