Skip Navigation

Behringer NU6000

iNUKE Series power amplifier — 1,600W x 2 at 8 ohms, 3,000W x 2 at 4 ohms

1 Review

Item # 937NU6000

This item is no longer available.

Shop all Pro Amplifiers

Overview

Our take on the Behringer NU6000

When I'd help my friend's band set up for a gig, the last thing I wanted to see was a bunch of heavy amps mounted in a back-breaking amp rack. That's why Behringer's iNUKE pro audio amplifiers are such a welcome sight. These highly efficient yet lightweight amps deliver impressive power for any event. And, Behringer backs up their iNUKE amps with a 3-year warranty. 

A lightweight chassis with a power punch

When I'd help my friend's band set up for a gig, the last thing I wanted to see was a bunch of heavy amps mounted in a back-breaking amp rack. That's why Behringer's iNUKE pro audio amplifiers are such a welcome sight. These highly efficient yet lightweight amps deliver impressive power for any event. And, Behringer backs up their iNUKE amps with a 3-year warranty. 

A simple and effective design

Weighing under 12 pounds, Behringer's NU6000 2-channel amplifier pumps out 1600 watts per channel at 8 ohms and 3000 watts per channel at 4 ohms. Its class D design and "back to front" ventilation system ensure that it will run with virtually no thermal buildup, eliminating the need for the heavy transformers and massive heat sinks found in "old school" amps. This also means you can stack them close together in a rack. The built-in "Zero Attack" limiters let you get the most output, but still protect your speakers from being overdriven. 

The NU6000 includes a built-in crossover, which can be set to full-range, low-pass for subwoofers, or high-pass for your satellite speakers. Front-panel illuminated controls provide precise level adjustments for each channel. The NU6000 also offers combination XLR and 1/4" input connectors for your source material and twist-lock output connections, compatible with Neutrik Speakon® connectors, for your speaker cables.

Note: You can't bridge the NU6000 amplifier to mono operation.

Product Highlights:

    General Information:
    • 2-channel pro audio amplifier
    • power output:
      • 1600 watts per channel at 8 ohms
      • 3000 watts per channel at 4 ohms
    • frequency response: 20-20,000 Hz (-2.0 dB)
    • signal-to-noise ratio: 100 dB
    • total harmonic distortion: 0.10%
    Features:
    • illuminated independent right- and left-channel level controls for precise volume matching
    • high- and low-pass crossovers for each channel (100 Hz)
    • variable-speed fan and "back to front" ventilation for heat dissipation
    • mode switch for stereo or mono operation
    • DC, short circuit, and thermal overload protection
    • rack mount ears included
    Connections:
    • inputs: combination XLR and 1/4" TRS for channels A and B
    • outputs: two twist-lock connections (compatible with Neutrik Speakon connectors)
    Other Information:
    • weight: 11.7 lbs.
    • dimensions: 18-15/16"W x 3-3/4"H x 16"D (2 rack spaces)
    • weight: 11.7 lbs.
    • warranty: 3 years (with product registration)
    • Our 60-day money-back guarantee

    What's in the Box:

    • 2-channel Power amplifier
    • 59" AC power cord (IEC 3-prong plug)
    • Quick Start Guide
    • Global Care Information

    I'm now wondering why my previous amp was so incredibly heavy. How is it possible this thing is so powerful yet so lightweight. German Engineering has its rep. I am worried that I may blow out my two JBL JRX100s

    Dave, Kissimmee, FL

    Reviews

    Behringer NU6000 Reviews

    Average Customer Review(s):

    (1 Review)
    rewards card
    Great Gear Giveaway

    Submit a review and enter to win a $350 rewards card

    Review this product

    Thanks for submitting your review

    Most reviews are processed and published within 5 business days. You will receive a confirmation email once your review has been published.

    Your Review

    Use the stars below to rate the overall product on a scale of 1-5
    1500
    Upload your photos

    Not visible. Email associated with order.
    (e.g., Charlottesville, VA)

    Additional Fields (optional)

    500
    500

    By submitting this review, you agree to our terms and review guidelines.

    Filter by rating

    Customer photos


    << >>
    Details

    Hands-on research

    Features and Specs

    General
    Number of Channels 2
    Power Class D
    Watts per channel 8 ohms 1600
    Watts per channel 4 ohms 3000
    Watts per channel 2 ohms ---
    Watts bridged ---
    Fan cooled Y
    DSP N
    Filters Hi-cut, Lo-cut
    Rack spaces 2
    Height (inches) 3-3/4
    Depth (inches) 12-15/16
    Width (inches) 18-15/16
    Weight 11.7 lbs
    Inputs
    RCA ---
    1/4" 2
    XLR 2
    Outputs
    1/4" ---
    Binding post ---
    Spring post ---

    Product Research

    Features
    Specifications

    Features

    Overview: The Behringer iNuke NU6000 is a lightweight 2-channel amplifier delivers plenty of power when you need it. Featuring a "back-to-front" ventilation system, this Class-D amplifier runs cool with "near zero" thermal buildup. You can use the amplifier on stage connected to a mixer, or for DJ work. The NU6000 is rack-mountable, and requires 2U of rack space (no hardware included).

    Built-in 3-way Crossover: The amp features a built-in 3-way crossover, which can be set to full-range, high-pass, or low-pass operation via a 3-way slide switch on the rear panel. Full-range mode sends an unfiltered output to the speakers. In HF mode, frequencies above 100Hz are sent to the speakers, while in LF mode, low-frequency content below 100Hz is sent to passive subwoofers.

    Mode Switch: The rear-panel input mode switch lets you switch between dual mono and stereo. The NU6000 is not bridgable.

    Bi-amping: With two iNuke amplifiers (NU1000, NU3000, or NU6000), you can bi-amp a pair of speakers. Bi-amping splits an audio signal into lower and upper frequency bands, and sends each frequency band to separate speaker cabinets. Horizontal bi-amping uses one iNuke amplifier to amplify the low frequencies, while a separate iNuke amplifier handles the high frequencies. Vertical bi-amping uses a single amplifier for each stereo side. This requires an external crossover to separate the low frequencies from the mid/high frequencies so they can be amplified separately.

    Connections: The iNuke NU6000 is equipped with two 1/4"-XLR combo inputs. The two outputs have professional twist-lock speaker connections that are compatible with Neutrik speakON connectors.

    Front Panel Controls: The NU6000 features simple operation with detented rotary gain controls for channels A and B. Each control has three amber signal LEDs that light when signal is present, and a Clip LED to indicate when the signal is distorted and needs to be reduced. The gain control knobs feature amber and red illuminated rings that are easy to see in dark conditions.

    Warranty Terms: Behringer offers a 3-year warranty when you register your product within 90 calendar days of purchase. If the product is not properly registered, the warranty period is one year.

    Specifications

    Maximum Output Power:

    • 4Ω Stereo: 2 x 3000 watts
    • 8Ω Stereo: 2 x 1600 watts

    Inputs:

    • Connections: 2 x TRS 1/4"-XLR Combo jacks
    • Input Impedance: 10kΩ (unbalanced), 20 kΩ (balanced)
    • Input Sensitivity (for rated power into 4Ω: 0.775 V (0 dBu)

    Outputs:

    • Connections: 2 x locking style professional speaker connectors (Neutrik speakON)
    • Distortion (1/8 rated power): <0.1%
    • Frequency Response: 20 Hz to 20 kHz, +0/-2dB
    • Signal-to-Noise: >100dB

    Dimensions:

    • Width: 18.9375"
    • Height: 3.7"
    • Depth: 12.9" (16" w/power cord)
    • Weight: 11.7 pounds

    Our Product Research Team

    At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

    Accessories
    Q & A

    Customer Q&A

    Crutchfield asked  
    Why did you buy this?

    Best bang for the buck.ð??? [ Pete  Aug 20, 2017 ]
    Music store recommend as a great product to give the sound I need [ Joseph  Jun 05, 2016 ]
    Articles
     
     
     
     

    would like to send you to a different page.

    Go there