Audio/video stand for TVs 30"-50"
Item # 051PFFPB01 | MFR # PFFPB-01
Special Purchase: -$200.00
$149.99 Earn up to 150 Rewards points
Offers & Financing
Our take on the Sanus PFFP by Crutchfield's Ralph Graves
The Sanus PFFP stand is a great choice if you can't – or don't want to – mount your TV to the wall. The fixed-position mount features a sturdy aluminum column with an adjustable bracket that can support a TV with a screen size between 30” and 50" and weighing up to 130 lbs.
A black tempered glass shelf and the stand's base provide storage for your components. The column is hollow, providing a spacious interior channel to hide wires and cables, maintaining a clean, uncluttered appearance.
- for flat-panel TVs 30"-50"
- supports up to 130 lbs.
- fixed-position mount
- aluminum column support
- adjustable shelf:
- 25-1/16"W x 16-1/2"D
- back tempered glass
- bottom shelf:
- 43-3/4"W x 16-1/2"D
- cable management system
- 43-3/4"W x 43-3/4"H x 23-1/4"D
- warranty: 1 year
- Our 60-day money-back guarantee
- assembly required
What's in the Box:
- Glass shelf
- 2 Monitor brackets
- Glass-shelf washer
- 2 Wall-bracket spacers
- Two M12 x 40mm bolts
- Two M12 washers
- Two M8 x 35mm bolts
- Two M6 x 20mm bolts
- Four M8 allen-bolts
- 4 Spring-washers
- Six M8 washers
- Two 1/4"-20 bolts
- 2 Plastic washers
- Four M4 x 12mm bolts
- Four M4 x 30mm bolts
- Four M5 x 12mm bolts
- Four M5 x 30mm bolts
- Four M6 x 12mm bolts
- Four M6 x 35mm bolts
- Four M8 x 16mm bolts
- Four M8 x 40mm bolts
- Eight M4/M5 washers
- Four M4 lock-washers
- Four M5 lock-washers
- Four M6 lock-washers
- Four M8 lock-washers
- Four M4/M5 spacers
- Four M6/M8 spacers
- 2 Safety bolts
- 3 Allen-keys
- Assembly Instructions
Stand is rather bulky, but quite sturdy.
Jack, Amesbury, MA
Sanus PFFP Reviews
Average Customer Review(s):
Thanks for submitting your review
Features and Specs
|Number of Shelves||2|
|Number of Adjustable Shelves||1|
|Number of Drawers||None|
|Built-in Cooling Fan||No|
|Stand Weight Limit||230 lbs|
|TV Shelf Weight Limit||130 lbs|
|TV Shelf Width||---|
|TV Shelf Depth||---|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
Flat-Panel TV Stand: The SANUS Flat Panel Series PFFP is a two-shelf flat-panel TV pedestal with sleek lines and a custom-blended black finish to offer a striking look that complements modern AV gear. High-quality construction and open architecture maximize airflow and provide the enhanced strength needed to handle even the largest televisions. Innovative aluminum column supports large TVs with grace. Features include a large wire management channel and a sleek, durable tempered-glass shelf.
TV Compatibility: The PFFPB-01 TV stand has a universal TV mounting bracket at the top of the pillar that is designed to fit flat-panel televisions from 30" to 50".The stand can support a TV with a maximum weight of 130 lbs.
Mounting Bracket & Hardware: Each monitor bracket has multiple bolt holes and can accommodate vertical hole spacing (on the back of the TV) up to 17.5" (444mm). Since the monitor brackets can slide on the wall plate, the horizontal hole spacing on the back of the TV can range from 2" to 26.5" (670mm). The PFFPB-01 comes with the following size screws to mount your TV to the bracket - M4, M5, M6, and M8. Given the mounting bracket's range of motion, it will accommodate the following VESA (Video Electronics Standards Association) mounting patterns:
- 50 x 50mm
- 75 x 75mm
- 100 x 100mm
- 200 x 100mm
- 200 x 200mm
- 300 x 200mm
- 300 x 300mm
- 400 x 200mm
- 400 x 300mm
- 400 x 400mm
- 600 x 400mm
Virtual Axis Technology: Once the TV is secured to the bracket, you can adjust the TV's angle. With the Virtual Axis fingertip tilt system, the TV can tilt 12° up or down, and you can lock the position by simply tightening a knob on each monitor bracket. The pillar design also allows you to adjust the height of the bracket before you mount the TV.
Adjustable Shelf: The PFFPB-01 features one adjustable, tempered glass shelf. With the TV bracket mounted in the highest position, you can move the adjustable shelves up and down within a range of approximately 2.5'. This range will vary depending on the size of the TV. The adjustable shelf measures 35" wide x 16.5" deep. The shelf can support a component with a maximum weight of 50 lbs.
Bottom Shelf: The base of the stand, which serves as the bottom shelf, is 43.25" wide and has a maximum depth of 23.125". In front of the pillar, the shelf has a depth of 18.1875".
Wire Management: The pillar has an internal channel that keeps the wires and cords out of sight.
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.
Why did you buy this?
Good value, good reviews. I have an application which will not allow a big piece of furniture nor wall hanging the TV. [ David Jul 10, 2018 ]
Had a heavy TV with no stand, and a house with dodgy old-fashioned plaster walls. This solves the problem perfectly. [ E Mar 22, 2018 ]
For security [ Paula Jul 28, 2017 ]
7 questions already asked
It'll hold it fine. Ive done it. It'll just look kinda funny [ Brandon May 19, 2018 ]
It is exceptionally well built if that helps at all. High quality heavy gauge materials throughout. [ GARY May 18, 2018 ]
Yes, should not be a problem [ Kevin May 18, 2018 ]
Yes, I have a 55" Samsung mounted to the Sanus Stand. It HEAVY DUTY and can probably support a 65" or 75" [ Rob May 18, 2018 ]
The mount that attaches to the pole can slide up to the top which is just shy of 43" from the bottom shelf/support. The overall height of the TV will vary depending of the size used and location of the wall-mounting screw holes on it My Bio: http://www.crutchfield.com/Support/Bio.aspx?bio=101 [ Paul Feb 19, 2018 ] Staff
Yes, it should work, although with the screen mount in its lowest position, you may not be able to use the glass shelf. Also keep in mind that the base is quite heavy. [ Alan Feb 11, 2017 ]
It most definitely would. But for over all safety, and appearance I would strongly recommend getting a fully adjustable wall mount. Then you can have any range of motion as well as height you desire. [ Neil Feb 11, 2017 ]
The base is heavy. I would not recommend that. [ E Feb 10, 2017 ]
You should be able to find specs and further information by clicking on the "Details" tab on the product page. [ Jeff Oct 12, 2015 ] Staff
It is Avery stable floor stand with room for speaker and receiver on base and shelf. It works well with my 42 inch Sony Bravia. - Nick [ NICK Sep 20, 2015 ]
Floor stand Very heavy and very stable Has an accessory shelf to hold other components [ L Sep 20, 2015 ]
If the hole pattern on the back line up it should fit but I would watch the weight of the TV because your base is not that wide and you may have alot of sway and it could fall over. [ HANK May 30, 2015 ]
YEs [ Darryl May 25, 2015 ]
A 52'' tv is exactly what I put on it. Perfect fit.I [ Anthony Apr 28, 2015 ]
I would ask the Crutchfield chat line guys. It is a very substantial stand. THe picture is a little misleading. It weighs a ton and should be very stable. Well made and easy to put together. [ L Apr 27, 2015 ]