10" 2-way powered PA speaker with Bluetooth® input — 1,100W peak
Item # 895FF10 | MFR # 6962000000
This item is no longer available.
Our take on the Fender Fighter by Crutchfield's Buck Pomerantz
Loud and powerful
Fender's reputation for putting the loud in music is well-deserved, and your music will definitely get heard with their Fighter 10" powered PA speaker. This tough, road-ready piece of gear delivers 1100 total watts to its speakers, enough power to produce sound levels up to 130 dB. You can cover a couple hundred people in a medium-sized room with just one of these speakers — just think what you could do with two.
Mix, match, and wireless
The Fender Fighter features a 3-channel input mixer — 2 Line/Mic inputs plus a stereo Aux/Bluetooth input for wireless streaming from a compatible device. Treble, Bass, and Volume controls on each channel give you the power to optimize your sound for any application or event. An XLR output provides the mixed signal so you can daisy-chain additional speakers for larger shows.
- 2-way powered PA speaker
- 10" woofer
- 1" titanium compression driver
- 1100-watt amplifier
- Bluetooth connectivity for streaming music
- 3 input channels with volume, treble, and bass controls
- ch 1-2: mic or line input (XLR and 1/4" TRS)
- ch 3: stereo aux (3.5mm TRS) or Bluetooth input
- mix output (XLR)
Other Features & Specs:
- frequency response: 55-20,000 Hz
- max SPL: 130 dB
- coverage: 90° horizontal, 35° vertical
- vinyl-covered wooden enclosure with perforated steel grille
- 35mm socket for pole mounting
- 2 rear handles
- dimensions: 12"W x 20-1/2"H x 12-3/4"D
- weight: 27.75 lbs.
- warranty: 2 years
- Our 60-day money-back guarantee
What's in the Box:
- Powered speaker
- 10' Power cord
- Owner's manual (Eng / Span / Fren / Others)
- Safety and warnings
Features and Specs
|Drivers per speaker||2|
|Woofer Size (inches)||10|
|Tweeter Size (inches)||1"|
|System Frequency response||55 - 20k|
|RMS Power rating||---|
|Program Power rating||---|
|Peak Power rating||1100 Watts|
|Mic Inputs||2 XLR, 2 TRS|
|Line Inputs||(2) XLR, 1/4" TRS|
|Tone Controls||Bass / Treble|
Overview: The Fender Fighter 10 is a two-way, full-range, portable loudspeaker designed for bands, solo performers, DJs, schools, and businesses. Its equipped with an 1,100 watt Class D amplifier driving a high-quality 10" woofer and a 1" titanium, horn-loaded, high-frequency compression driver. It includes 3 input channels, each with two-band EQ, Bluetooth connectivity for audio streaming from mobile devices, and a loop output jack with subwoofer crossover switch. The Fighter 10's dual tuned-port system provides an extended bass response while its dynamic limiting circuitry continuously monitors headroom providing maximum power without distortion, even at high volume levels.
Rear Panel: All of the Fighter 10's inputs, output, and controls are located on the rear panel. Inputs 1 and 2 have both an XLR and a 1/4" TS input and include a Mic/Line switch, which allows for a wide range of input signals. The third input includes an 1/8" stereo jack and also doubles-up as the Bluetooth input channel. This section has a pairing button and a blue LED indicator that lights when a Bluetooth connection is established and in use. Each of the three inputs has its own Bass, Treble, and Volume controls and a Master volume adjusts the overall output from the speaker. A male XLR socket is provided to pass the main signal out to additional speakers and has a selector button that determines if the output is full-range or a crossed-over subwoofer signal. The main power switch, 3-pin IEC power socket, and fuse compartment are also located on the rear panel.
Construction: Designed for rugged durability, the Fighter 10's enclosure is made of wood encased in a vinyl covering along with protective plastic corner guards and a perforated steel grill. Two rear-mounted carry-handles make for easy transportability and a 35 mm socket on the bottom allows the Fighter 10 to be pole-mounted.
- Power Amp: 1,100 watt Class D
- Frequency Response: 55 Hz - 20 kHz
- Maximum SPL: 130 dB
- Speakers: One 10" woofer, one 1" compression driver
- Horizontal: 90 Degrees
- Vertical: 35 Degrees
- Fuse: T4AL 250 V (100 - 120 V) User replaceable on rear panel.
- Weight: 27.75 lbs.
- Dimensions: Width - 12.0", Height - 20.50", Depth - 12.75"
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.