Wireless audio adapter kit
| Watch a product review |
Audioengine W3 Wireless Audio Adapter Kit
From Audioengine: W3 Wireless Audio Adapter Kit
Audioengine W3 - Sender connected to laptop computer, Receiver connected to supplied USB power adapter
Our take on the Audioengine W3 by Crutchfield's Dave Bar
Send wireless audio to your sound system
The Audioengine W3 lets you make a convenient wireless connection between any two components where you'd normally use a stereo RCA or mini patch cable. This two-part system includes a powerful wireless Sender and a companion Receiver. Connect the Sender to your portable music player via the included stereo minijack cable, or plug it into your computer's USB port. Then connect the Receiver's stereo minijack output to your audio system or powered speakers.
Powered by USB — one adapter included
Both the Sender and Receiver are powered via their USB connections. One AC-to-USB power adapter is included in the package. This is perfect when you're using the system to send audio from your computer, because the Sender can get its power from the USB port. It's also perfect when using the system to wirelessly connect your music source to the Audioengine A5+ powered speakers, which feature a handy back-panel USB power output. Other AC-to-USB power adapters — such as the one that comes with most iPods® — can be used for applications where you need two adapters.
Unparalleled sound quality and versatility
The W3 can pass CD-quality sound with no loss in audio fidelity, so you can enjoy your music in full detail — just like you would with a wired connection. The transmitter has an effective range of 100 feet, so you'll get a strong signal not only across the room, but across your home as well. And this versatile system can also be used in other applications. For example, pair the W3 and your compatible home theater receiver with Audioengine's A2+ compact powered speakers to make a wireless rear speaker setup for your surround sound system. Or use it to create a wireless subwoofer. With the W3 Sender's ability to transmit to multiple receivers, you can even have multiple subwoofers to add more boom to your room.
- transmits interference-free, CD-quality audio signals
- stereo minijack input
- USB connection for computer, can also be connected to AC power adapter
- supports audio sample rates up to 48kHz/16-bit with no compression
- compatible with both PC and Mac®
- plug-and-play design, no software to download or install
- can transmit to up to 3 receivers simultaneously (additional receivers sold separately)
- stereo minijack output
- USB connection for AC power adapter
- plays all music formats from any media player
- range: up to 100 feet
- 2 stereo minijack cables included, along with stereo minijack to female RCA adapter
- comes with one USB-to-AC power adapter
- warranty: 3 years
- Our 60-day money-back guarantee
What's in the Box:
- Wireless audio receiver
- Wireless audio sender
- USB-to-AC power adapter
- 2-prong AC adapter plug
- Two 20" stereo minijack audio cables
- 12" Male stereo minijack-to-female stereo RCA adapter cable
- Setup Guide
I had an old Linksys Music Bridge. It worked okay, but the software that came with it wasn't very reliable or easy to troubleshoot. These are great. No software to configure; truly plug and pay. Sound fidelity is excellent. No problems with audio cutting in and out like my Music Bridge.
JCinFrederick, frederick, MD
Audioengine W3 Reviews
Average Customer Review(s):
Thanks for submitting your review
Overview: The Audioengine W3 is a 16-bit wireless system that is designed to connect your audio components wirelessly. The W3 handles USB audio, up to 16 bits/48KHz with no compression, as well as analog audio via a 3.5mm minijack. The W3 kit includes a Sender (transmitter) and Receiver; the system is designed to deliver an audio signal wirelessly between two components. This system will work in many different applications, including (but not limited to) a computer sending audio to powered speakers, a computer sending audio to a stereo or A/V receiver, an iPod or other portable player sending audio to the Audioengine 5+ powered speakers (the A5 is specifically mentioned here because it has a USB port to power the W3 Receiver), and an A/V receiver sending audio to powered subwoofers or powered speakers.
Note: The W3 is natively compatible with Windows 2000/XP/Vista/7/8 and Mac OSX. There are no drivers or software to install.
Two Part System: The W3 consists of 2 parts, the Sender and Receiver. The Sender transmits audio from your computer through USB audio or from any product with a 3.5mm minijack or RCA audio output. The other end of the W3, the Receiver, delivers audio to any product with minijack or RCA audio connectors.
- Sender: The W3 Sender is powered through its USB plug; one USB AC power adapter is included with the system to power either the Sender or Receiver. If not powered by the included adapter, the Sender can be powered by a computer, iPod power supply, or numerous other USB power supplies currently available. The audio input is a 3.5mm stereo minijack. When used with a computer, the Sender acts as a sound card and receives its audio input through the USB port, so no connection to the minijack is necessary.
- Receiver: The W3 Receiver is powered through its USB plug; one USB AC power adapter is included with the system to power either the Sender or Receiver. If not powered by the included adapter, the Receiver can be powered by Audioengine A5 powered speakers, an iPod power supply, or numerous other USB power supplies currently available. The audio output is a 3.5mm stereo minijack; no audio signal is transferred through the USB connection.
Note: If you are wirelessly connecting a powered subwoofer to an AV receiver using the W3, then you will need one stereo minijack-to-RCA cable and one stereo RCA cable (both sold separately) to go along with the included minijack-to-RCA adapter. If you do not use the included minijack-to-RCA adapter, you can use two stereo minijack-to-RCA cables (sold separately).
Pairing: The Sender and Receiver in the W3 kit are linked together at the factory, so no pairing is necessary. If you have several W3 systems, multiple Receivers can be paired with each Sender, and vice versa, but each can only communicate with one of the other at a time. The W3 can transmit to up to 3 receivers (772W3R, sold separately) simultaneously.
Note: The newer chip-sets used in the W3 are not backwards compatible with the earlier Audioengine W1 or W2 wireless systems.
Proprietary Wireless Transmission: The W3 wireless kit transmits uncompressed PCM audio (15Hz-22KHz; +/- 1.5db) in the 2.4 GHz range (2.4-2.4835GHz) using a proprietary WiFi 802.11 protocol specifically designed for audio (up to 100'). The system avoids interference by constantly monitoring the entire 2.4 GHz spectrum and choosing the channel that can achieve the cleanest transmission. The system detects deteriorating conditions on the current channel and switches if needed in under 20 ms, without any interruption in the audio stream. The W3 also employs dynamic transmit power control, meaning it transmits with only as much power as required to maintain a clear audio connection. This makes W3 coexist better with other 2.4 GHz devices, including WLAN, Bluetooth, and other Audioengine wireless devices. The W3 incorporates a real-time streaming transmission technology designed specifically for music. It includes six quality protection innovations to achieve a robust wireless audio link.
- Error-tolerant coding that incorporates forward error correction (FEC) coding. FEC ensures that lost bits can be completely reconstructed for common interferers and sources of bit errors. The coding is optimized for lossless performance against common and known interferers. FEC also enables error detection so the system knows when and where data is corrupted. It is analogous to techniques employed on Redbook CDs where the laser head incurs bit-errors as a result of imperfections in the pickup of data from the optical media.
- For larger interferers, W3 employs sample interleaving and sample error concealment (SEC). This allows W3 to compensate gradually during periods of increasing signal degradation, thus minimizing audible discontinuities. When encountering interference bursts (up to 6ms in duration) SEC can recover every alternate sample, after which the hardware DSP performs linear interpolation to recover lost samples.
- Packet error concealment (PEC) ensures there are no jump discontinuities in the audio stream during periods of severe interference, giving the system time to find a clean channel.
- W3 employs intelligent, Dynamic Frequency Selection. The system avoids interference by constantly monitoring the entire 2.4 GHz spectrum, choosing the channel that can achieve the cleanest transmission. As conditions on a currently occupied channel deteriorate, the system detects this, and switches channels (in under 20 ms) without any interruption in the audio stream.
- W3 employs dynamic transmit power control. This means that W3 is transmitting with only as much power as required to successfully maintain a clear audio connection. This makes W3 coexist better with other 2.4 GHz devices, including WLAN, BT, and other Audioengine wireless devices.
- W3 combats RF fading, or multi-path-induced signal-strength fluctuations, by natively supporting antenna diversity. Support for dual antennas allows the system to "navigate" around zones of decreased signal strength by creating four possible antenna-to-antenna paths for the system to choose from on a continual basis. The end-result is an overall improvement in audio signal robustness due to an improved link margin.
Power Requirements: The Sender and Receiver both require power, which can come from a USB computer port, the included AC power adapter, the optional Audioengine USB Power Adapter, or from any other USB charger (such as an iPod charger). Another power source is the Audioengine 5+ powered speakers (sold separately), which are equipped with a USB power port on the rear panel. If you're using the W3 Wireless Kit for a receiver/subwoofer application, a second USB power supply may be needed.
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.
Why did you buy this?
To create a wireless connection to my rear surround speakers, allowing me to get additional life out of a >10 year old Denon AVR-3805, Harmon Kardon HTKS-15 setup [ Anthony Oct 28, 2018 ]
So I could connect my computer to my NAD Receiver and watch a movie from my computer without a sound delay (Bluetooth has a delay) and not have to run a long RCA cable from the back of the NAD across the room to the Mini headphone jack in my computer. [ Jonathan Sep 01, 2018 ]
so i could pair my AudioEngine HD6s better to my computer! [ Thomas Jan 13, 2018 ]
recommendation from Taylor [ Xsiliconkid Dec 04, 2017 ]
This looks like a great way to establish wireless connection from my TV to my JVC reciever. as I am intending to mount it on a brick wall, Wiring will be difficult. [ Steve Jul 19, 2017 ]
To enable my AVR to receive audio from my Flat Screen TV via wireless transmission. [ Gray Apr 26, 2017 ]
to play music from my pc, listen on my stereo. [ SIDNEY T Dec 21, 2016 ]
To run a subwoofer wirelessly. Works great. [ John Dec 15, 2016 ]
add second room for xm radio [ Dennis Dec 15, 2016 ]
Simple hook up , low cost .Just want my internet radio on home stereo system [ XCErider Feb 15, 2016 ]
3 questions already asked
3 answers Can you use two separate w3's together (meaning one receiver/sender x 2) without issue? I'm looking to set up two rear wireless speakers, but want each to be on their own respective channel (right/left). Does each sender/receiver combo have it's own unique signal, or does the possibility of crossed signals exist? [ BklynB Mar 19, 2017 ]
Sorry, I am only using one at a time. Make sure you stay with Crutchfield as they do excellent returns and my first one over heated and was replaced fast and free. Also, this wireless connection is very sensitive to line of site; if stuff gets in the way it may not work well and you want to use it on the same floor. It barely worked when on two floors even with open concept. Lastly tech support was good at both places, but other devices near the frequency band will interfere, so these are a pretty fragile wireless link in my experience. Again, good product, excellent support, but not for every application for sure. Good luck. [ Lawrence Mar 21, 2017 ]
Don't truly know , I would imagine if you synced one set at a time . I can tell you that they work very well , audio quality is great . Good luck [ XCErider Mar 21, 2017 ]
It doesn't work that way. It works anywhere that you want to connect an stereo audio output (like a headphone jack) and a stereo audio input (like audio in jack) on your stereo receiver. You can't connect it to a speaker. I suggest that you chat with the folks at crutchfield to find a better solution for what you want to do. [ jimchandler63 Mar 20, 2017 ]
I was using this set up to send a signal from my AV amp to a Polk powered subwoofer. I stopped using it because of a slight audio delay. [ CHRIS Apr 16, 2014 ]
Audioengine rates the W3 as having a <20ms latency, so technically yes there is a delay. However, 20ms is .02 seconds and only anyone with super human hearing would be able to detect that. I use the W3 to run my wireless sub and cannot detect any delay in relation to the rest of the signal. [ TODD Apr 16, 2014 ]
Thanks guys! Appreciate the replies. [ Peter Wood Apr 14, 2014 ]
never used returned for credit. sorry i couldn't help ! [ JOHN R Apr 14, 2014 ]
There is no signal degradation or latency using the W3. [ STEVE Apr 14, 2014 ]
If there is a delay then it is very slight, as I have not noticed anything. [ ROBERT Apr 14, 2014 ]
Thanks for your question Mike. I believe what you are looking for is the Audioengine W3R. [ Jeff Dec 12, 2013 ] Staff