Chat
Contact us
Close contact box
Connect ID #
492 325 928 4
Connect ID #
492 325 928 4
Don't wait on hold. We'll call you back when it's your turn to talk with the next available .
Please enter your name  
Please enter your phone number  
Please enter a message  

Calls may be recorded for training and quality control purposes.

We are located in Virginia USA.

Thank you. We will be calling you .
We're sorry. We have encountered a problem.

Pro-Ject RPM 3 Carbon Manual belt-drive turntable with pre-mounted Sumiko Blue Point No.2 cartridge (Gloss Red)

Item # 252RPM3CGR

Turntables like this demonstrate why audiophiles remain so enthusiastic about analog sound.

Turntables like this demonstrate why audiophiles remain so enthusiastic about analog sound.

Item # 252RPM3CGR

Shop all Pro-Ject Turntables

About the Pro-Ject RPM 3 Carbon

Dave Bar

Savor the sweet sounds of vinyl

For an outstanding listening experience, give Pro-Ject's RPM 3 Carbon a spin. Turntables like this demonstrate why audiophiles remain so enthusiastic about analog sound. Precise construction and careful attention to design and materials allow this player to retrieve ear-opening layers of sonic detail from the grooves of your favorite albums. Its striking appearance and high-gloss piano lacquer finish make this 'table look every bit as good as it sounds.

Savor the sweet sounds of vinyl

ProJect RPM 3 Carbon and Sumiko Blue Point No 2 cartridge

This Pro-Ject RPM 3 Carbon comes equipped with the high-performance Sumiko Blue Point No. 2 moving coil cartridge.

For an outstanding listening experience, give Pro-Ject's RPM 3 Carbon a spin. Turntables like this demonstrate why audiophiles remain so enthusiastic about analog sound. Precise construction and careful attention to design and materials allow this player to retrieve ear-opening layers of sonic detail from the grooves of your favorite albums. Its striking appearance and high-gloss piano lacquer finish make this 'table look every bit as good as it sounds.

A focus on performance

The RPM 3 Carbon's unusual boomerang-shaped MDF chassis does more than just look cool — it also resists vibrations that can smear sonic detail. The 'table rests on three vibration-damping cone feet that further reduce noise. The heavy MDF platter is topped by an integrated mat made from recycled record vinyl, and spins on an inverted bearing with a ceramic ball for smooth, silent rotation and reduced rumble. The motor is driven by an ultra-precise AC generator with a DC power supply for enhanced speed stability. The isolated motor assembly and belt drive system keep motor vibration away from the chassis, preventing noise from being transferred to the cartridge.

The RPM 3 Carbon's advanced, S-shaped 10" tonearm boasts carbon fiber, aluminum, and resin construction for superior rigidity, strength, and maximum internal resonance damping. A damped, offset counterweight design lowers the arms center of gravity to improve tracking — a big help with warped records. And the RPM 3 Carbon comes outfitted with an easy-to-use magnetic anti-skating mechanism for faster setup.

Includes a Sumiko Blue Point No.2 phono cartridge

A longtime favorite with audiophiles, the Sumiko Blue Point No. 2 phono cartridge comes pre-mounted and ready to go on the RPM 3 Carbon. This high-output moving coil cartridge offers outstanding performance, serving up the warm, rich sound of vinyl with remarkably smooth tonal balance plus plenty of musical detail and resolution. The Blue Point No. 2 also boasts a nude-mounted, elliptical diamond stylus to minimize friction and wear on your treasured LPs, while providing a longer usable lifespan. Its high-output voltage design means direct compatibility with the phono inputs on many receivers and amps, eliminating the need for an additional moving-coil preamp.

READ LESS

Product highlights:

  • 12" resonance-optimized medium density fiberboard (MDF) platter with integral recycled record vinyl mat
  • precision inverted bearing with ceramic ball for smooth platter rotation, greater speed accuracy, and low wow-and-flutter
  • central mass point optimizes vibrancy behavior
  • extra-long 10" one-piece S-shaped tonearm made from carbon fiber, aluminum, and resin for better rigidity and internal vibration damping, plus reduced tracking angle error
  • includes pre-mounted Sumiko Blue Point No.2 high-output moving coil cartridge
    • frequency response: 15-35,000 Hz
  • tonearm offers adjustment of vertical tracking angle and azimuth for optimized playback performance and cartridge-matching
  • medium density fiberboard (MDF) plinth with three vibration-absorbing cone feet
  • 15-volt AC motor driven with ultra-precise AC generator and DC power supply
  • magnetic anti-skating for easy setup and more precise tracking
  • isolated motor assembly optimized for low noise and speed stability
  • manual operation with silicone-damped tonearm lift
  • 33-1/3 and 45 rpm speeds with manual speed change
  • speed drift: ±0.19% at 33 RPM, ±0.08% at 45 RPM
  • wow and flutter: ±0.14% at 33 RPM, ±0.11% at 45 RPM
  • signal-to-noise ratio: 71 dB
  • detachable RCA audio cable included
  • tracking force gauge included
  • external power supply reduces likelihood of electro-mechanical interference
  • dust cover not included
Dimensions and warranty:
  • 14-15/16"W x 4-7/8"H x 13-1/2"D
  • weight: 12.1 lbs.
  • warranty: 2 years (1 year warranty for the supplied cartridge)
  • MFR # RPM 3 Carbon-GR

What's in the box:

  • Turntable (tonearm & cartridge installed)
  • Platter w/ integrated vinyl mat
  • Motor
  • AC power supply (attached 6' DC cord)
  • 3 AC plug adapters (US/EU/UK)
  • Drive belt
  • 47" RCA stereo cable (with ground wire)
  • 45 RPM adapter
  • Counterweight
  • 3 Protective discs
  • 2 Hex-keys
  • Stylus Pressure Gauge
  • Two-Point Cartridge Alignment Protractor
  • Instructions For Use booklet
  • Warranty Information

Customer reviews for Pro-Ject RPM 3 Carbon

Loading reviews...

Average review:

4.0 out of 5 stars
4 reviews

Thanks for submitting your review

Filter by rating

Customer photos

Customer provided image, click to load a larger version.
Customer provided image, click to load a larger version.

Sort reviews

Sort by:
Items per page:
View page:

Verified customer (What's this?)
Verified employee review (What's this?)

Reviewed on Samsung.com

This review was collected as part of a promotion

Pros:

Cons:

Crutchfield response
Customer provided image, click to load a larger version.
<< >>

More details on the Pro-Ject RPM 3 Carbon

Stacey B.

Features & specs

Features
Color Gloss Red
Operation Manual
Speeds 33-1/3, 45
Speed Control ---
Drive Type Belt
Pitch Control No
Phono Preamp No
USB Output No
Bluetooth Built-In No
45 RPM Adapter Yes
Audio Cable Detachable
Power Cable Detachable (12-volt DC adapter)
Materials and Construction
Plinth MDF
Platter MDF
Tone Arm Shape S-shaped
Tone Arm Material Carbon Fiber/Aluminum/Resin
Tone Arm Lift Finger, Lever
Cartridge Info
Included Cartridge Blue-Point II
Cartridge Type MC
Removable Headshell No
Tracking Weight 2.0 g (20mN)
Frequency Response 20-20,000
Output Voltage 2.5
Load Impedance 47,000
Load Capacitance 100-200
Audio Specs
Signal to Noise Ratio 71
Wow and Flutter 0.14
Dimensions and Warranty
Width (Inches) 17.1875
Height (Inches) 4.9375
Depth (Inches) 15.5625
Weight 12.125 lbs.
Turntable Parts Warranty 2 Years
Turntable Labor Warranty 2 Years
Cartridge Parts Warranty 1 Year
Cartridge Labor Warranty 1 Year

Product Research

Features

Precision Belt-Drive Using Synchronous Motor: The Pro-Ject RPM 3 Carbon features a precision belt-drive system using a quiet running synchronous motor. It supports both 33-1/3 and 45 rpm speeds.

Note: Not compatible with Speed Box S or Speed Box DS.

MDF Construction w/ Inverted Bearing Assembly The Pro-Ject RPM 3 Carbon features three-point MDF (medium density fiber) plinth for exceptional stability. The low resonance chassis holds a newly designed inverted platter bearing with ceramic ball for further reduced rumble. The platter is made from 300mm MDF and features an integrated vinyl mat.

S-Shaped Tonearm w/ Sumiko Blue-Point II MC Cartridge: A completely new designed 10" S-shaped tonearm tube is made from carbon fiber, aluminum and resin. Using a complex 3-step process with heat treatment and 100bar pressure, arm tube rigidity is strengthened, internal damping is maximized and resonances are reduced to a minimum. Fitted to the tonearm is a Sumiko Blue-Point II MC cartridge for exceptional sound quality reproduction.

Note: The Sumiko Blue-Point II MC cartridge that comes with this turntable is a "high-output" moving coil cartridge. This means it can be connected to a standard MM phono input and does not require a MC input.

Tracking Features: Additional features are a new magnetic antiskating mechanism and a TPE-damped counterweight for improved tracking.

Stereo RCA Output w/ Grounding Screw: Connection to the phono input of your amplifier can be made with connecting cables of your choice through the turntable's gold-plated stereo RCA phono jacks and grounding screw. The Pro-Ject turntable comes supplied with a 47" stereo RCA cable with ground wire.

Outboard Power Supply: An outboard 15V AC motor is smoothly driven using an ultra-precision AC generator with DC power supply for further enhanced speed stability.

No Dust Cover: This turntable does not come with a dust cover.

Loading accessories...

Customer Q&A

Loading articles...

Compare the sound