Skip Navigation

Polk Audio HTS 12

Powered subwoofer (Classic Brown Walnut)

26 Reviews | 3 questions - 19 answers

Item # 107HTS12W

In Stock

Add to Cart

Ask an expert

Our VA-based experts can help.

1.844.507.4433

Chat Call Me

Overview

Our take on the Polk Audio HTS 12

I've been a Polk Audio home theater enthusiast for years, having owned several different-sized Polk systems that I've loved. If I was building a new surround sound system today, I'd strongly consider the HTS 12 for my all-important bass production.

Mark "movie night" as a special event on your calendar

I've been a Polk Audio home theater enthusiast for years, having owned several different-sized Polk systems that I've loved. If I was building a new surround sound system today, I'd strongly consider the HTS 12 for my all-important bass production.

This hard-hitting sub can fill even large rooms with deep, responsive bass. My hunch? If you're like me, you may look forward to watching movies with family or friends, just to show them how good the bass sounds.

Polk Audio HTS 12 powered subwoofer

The Polk Audio HTS 12 powered sub features a sleek, rounded enclosure and a removable grille.

A new design adds visual interest

This sleek sub features a hip, updated design with rounded corners and a slot on the bottom that shows off the flared, down-firing port — a bit of a departure from Polk's previous enclosures. Cosmetically, it's my favorite Polk sub design to date.

But the HTS 12 offers more than just good looks. It pairs a 12", front-firing driver with a 200-watt amp for impactful bass from music and movies. Use it as part of a stereo music system, or as part of a Polk Audio Signature home theater system.

Get the most out of your sub

Where you place your sub within your room makes a big difference in how it sounds. Check out our tips for placement and setup to get the best performance out of your system. 

Product Highlights:

  • bass-reflex (ported) enclosure with down-firing Power Port® for clear, accurate bass
  • 12" front-firing polypropylene woofer
  • 200-watt RMS (400-watt peak) Class D amplifier
  • frequency response: 28-120 Hz (-3dB)
  • RCA line level/LFE (low frequency effects) input
  • variable low-pass crossover control
  • phase switch to acoustically match the subwoofer's output to your main speakers
  • automatically powers off when it no longer receives signal from the receiver
  • 17-3/16"W x 18-13/16"H x 20-1/16"D
  • weight: 49.9 lbs.
  • warranty: 5 years woofer, 3 years amplifier
  • Our 60-day money-back guarantee

What's in the Box:

  • Powered subwoofer
  • Grille
  • 8' AC power cord
  • Owner's Manual
  • Online Product Registration sheet
Reviews

Polk Audio HTS 12 Reviews

Average Customer Review(s):

(26 Reviews)
rewards card
Great Gear Giveaway

Submit a review and enter to win a $350 rewards card

Review this product

Thanks for submitting your review

Most reviews are processed and published within 5 business days. You will receive a confirmation email once your review has been published.

Your Review

Use the stars below to rate the overall product on a scale of 1-5
1500
Upload your photos

Not visible. Email associated with order.
(e.g., Charlottesville, VA)

Additional Fields (optional)

500
500

By submitting this review, you agree to our terms and review guidelines.

Filter by rating

Customer photos


<< >>
Details

Hands-on research

Features and Specs

Enclosure Bass Reflex
Video Shielded No
Woofer Size (inches) 12
Woofer Composition Polypropylene
Firing Direction Front
Wireless No
Preamp-Level Inputs Yes
Speaker-Level Inputs No
Speaker-Level Outputs No
Low-Pass Crossover Freq 40-160
High-Pass Crossover Freq None
Phase Switch Yes
Amplifier Output (watts) 200
Frequency Response 28-120 Hz
Height (inches) 18-13/16
Width (inches) 17-3/16
Depth (inches) 20-1/16
Weight 49.9 lbs
Speaker Parts Warranty 5 Years
Speaker Labor Warranty 5 Years
Amplifier Parts Warranty 3 Years
Amplifier Labor Warranty 3 Years

Product Research

Features

12" Polypropylene Dynamic Balance Woofer: The HTS 12 houses a front-firing 12" polypropylene long-throw woofer with rubber surround for deep, accurate bass. The woofer incorporates Polk's patented Dynamic Balance technology and is Klippel optimized to provide clean, clear bass, better linearity, lower distortion, and greater durability.

200W Class D Amplifier: The Polk HTS10 employs a 200 watt (RMS) / 400 watt (Peak) Class D amplifier for dynamic bass performance.

Power Port Technology: The Polk HTS 12 powered subwoofer utilizes floor-firing patented Power Port Technology for deeper bass response and reduced port noise. The Power Port floor-firing design smoothly transitions air flow from the speaker into your listening area for deep, extended bass impact while minimizing turbulence, distortion, and port noise. At the port tuning frequency, Power Port equipped subwoofers have 3dB less port noise than similarly configured subwoofers without Power Port.

Non-Resonant Enclosure: The powered sub's strong, rigid, and acoustically inert curved enclosure reduces unwanted internal standing waves for less audible coloration. Its non-resonant Meddite MDF construction, with extra bracing and thick baffle, ensures a more lifelike sound.

Controls: Built-in controls for variable volume, low pass filter, and phase let you tune in optimum bass levels. All controls are found on the rear-panel of the powered sub.

  • Volume: The rotary volume knob adjusts the volume of the powered sub relative to the other speakers in the system.
  • Low-Pass Filter: The variable low-pass filter is adjustable from 40-160 Hz. The low-pass filter is only active for the powered sub's stereo RCA inputs. The low-pass filter is deactivated when using the powered sub's LFE input.
  • Phase: The phase switch allows you to select 0-degrees (normal) or 180-degrees (reverse). If the bass sounds muddy or unclear, toggling the phase control can sometimes strengthen the bass attack.

Line-Level Inputs: The Polk HTS 12 powered subwoofer is outfitted with an unfiltered LFE input and filtered stereo RCA inputs (subwoofer cable not included).

  • LFE Input (Unfiltered): The LFE input consists of an unfiltered mono-RCA jack (the LFE input bypasses the powered sub's variable low pass filter). Using the LFE input when connecting to an AV receiver or integrated amp with a filtered LFE output and built-in crossover control.
  • Stereo RCA Input (Filtered): The Stereo input consists of a left & right RCA jack (both jacks are filtered). Use the Stereo input when connecting to a receiver or integrated amp that does not have an LFE output, but does provide a preamp output.

Auto & DC Power On/Off: The powered subwoofer will automatically turn on when an audio signal is received and off when there is no audio signal for about 20 minutes. There is also a 12V trigger input on the back of powered sub which allows it to power on with your receiver or integrated amp that features a 12V trigger output (the 12V trigger provides a faster auto on/off).

Note: There is a switch on the back of the powered sub that indicates which power on/off method you will be using - Auto or DC.

Placement: You may place the powered subwoofer anywhere in your room, but it will perform best when it's on the same side of the room as your system's front speakers. Also, placing the subwoofer near a wall or in a corner will increase its loudness.

Frequency Response: The overall frequency response for the subwoofer is 22-180Hz, and the -3 dB frequency response is 28-120Hz.

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Accessories
Q & A

Customer Q&A

Crutchfield asked  
Why did you buy this?

Have an older and smaller model from 2001 that's worked very well. [ S  Sep 26, 2018 ]
I have Polk Audio 7.1 outfitted already in my home theatre. This is going to bring me up to 7.2 [ Demelius  Sep 07, 2018 ]
I've always liked Polk and this sub is to match the one I already have and to "balance" the room. (-: [ Kirk  Jun 18, 2018 ]
Looks like the best deal for size and sound [ Michael  May 05, 2018 ]
Tried the smaller Polk subwoofer and didn't like it. After talking to Oliver at Crutchfield, this one sounded like the right choice. [ Shari  Apr 19, 2018 ]
I was actually looking for a Yamaha subwoofer to replace the one that recently failed on me. However, the choices for that brand seem to be limited. I've heard that Polk is a very good brand for audio equipment and with all eleven reviews being 5 star, this particular sub seemed to be a good choice. I'm very excited to receive this product and hear what quality of low frequencies it delivers. [ Steve  Apr 05, 2018 ]
Saved money on this sub via your scratch and dent pricing. Also it seem to be pretty good unit according to others who purchased it. [ Marc A.  Mar 14, 2018 ]
great comments [ Raymundo  Mar 11, 2018 ]
I want an upgrade on my Home Theatre System. [ Reggie  Jan 29, 2018 ]
Brand name, excellent reviews, sale price. [ James  Jul 28, 2018 ]
After comparing subs I decided it to be for my system. [ Randall  Jun 16, 2018 ]
Have Polk center speaker. Crutchfield has nice shopping site. [ Manuel  Mar 29, 2018 ]
I have a Polk subwoofer that has lasted forever, but I am using two mismatched subs right now and I would like a matching pair. I am using them in a large area and I needed them to be ported. These fit the bill. [ Tech head  Mar 07, 2018 ]
I currently have Polk center, front and surround speakers and their performance has been outstanding. Based on my experience and the new design I chose the Polk HTS 12 to complete my surround system. [ Thomas  Jan 10, 2018 ]
#1- It is a work of art and should work perfectly with my Polk signature series speakers #2- I bought 2 S60 towers, bundled with the S35 center, Onkyo TX-NR777, and lastly the elephant in the room- The Polk PSW125. What a massive sub! You would think the elephant would mix in well with the signature series, but honestly the different cone material makes it stick out from the herd. The crisp, accurate and exceptional response is just not there (Comparatively). [ Zachary  Dec 02, 2017 ]

3 questions already asked

I do not see why not however I would recommend adding some type of rubber "feet" to eliminate vibration between the enclosure and floor. This sub is impressive and does a great job filling a room! [ Anthony  Sep 10, 2018 ]
Should nbe fine, but you might decrease the output slightly, as the sound coming out of the vent (normally on the bottom) wouldn't be reinforced by reflecting off of the floor. [ Robert  Sep 09, 2018 ]
That would block part of the airflow into the speaker box so I don't think that would be a good idea besides it's almost a perfect cube [ Michael  Sep 09, 2018 ]
Not sure but I think it wouldn't be a good idea to get the best performance [ BALAJI  Sep 09, 2018 ]
I don't think that would be a good idea [ Michael  Sep 09, 2018 ]
Oh I'm sure it would work for a while. I would not though due heat build up. I have had to replace mine due to amp failure. The air moves at the bottom sort of like a free air port. Also, I would think it would move a little on the throttling low frequency this sub creates. [ Gunny  Sep 09, 2018 ]
You could lay it on it's side. Just not the back {or front}. [ james  Sep 09, 2018 ]
I would not recommend it. No [ Reggie  Sep 09, 2018 ]
Mine does the same thing. When I push it to hard it stops playing and I have the red flashing light from the rear. I had the gain to high on back of sub. I cut it down just a bit and all has been good. [ Cameron  Apr 16, 2018 ]
I'm sorry, but I have not experienced this problem. In fact my unit has performed quite well. [ Thomas  Apr 16, 2018 ]
We added two 2x4 boards to lift it off of the floor and we have never had any problem. I would recommend trying it to see if perhaps the heating up is happening. My neighbor plays in a band professionally and recommended it. [ Deidre  Apr 16, 2018 ]
separate cord that plugs into the back of unit [ eddie  Feb 26, 2018 ]
It plugs directly into the unit. [ Thomas  Feb 26, 2018 ]
Plugs in [ Aaron  Feb 26, 2018 ]
the power cord plugs into the unit and into the wall at the other end fantastic speaker -very very happy with it [ greg  Feb 26, 2018 ]
The power cord plugs into the unit. It is not hard-wired. [ DAVID  Feb 26, 2018 ]
It plugs into the back [ Cameron  Feb 26, 2018 ]
No, it is a separate cord. [ wesley  Feb 26, 2018 ]
It has it's own cord that plugs in and can be removed [ ronald  Feb 26, 2018 ]
Articles
 
 
 
 

would like to send you to a different page.

Go there