Chat
Contact us
Close contact box
Connect ID #
188 068 797 4
Connect ID #
188 068 797 4
Don't wait on hold. We'll call you back when it's your turn to talk with the next available .
Please enter your name  
Please enter your phone number  
Please enter a message  

Calls may be recorded for training and quality control purposes.

We are located in Virginia USA.

Thank you. We will be calling you .
We're sorry. We have encountered a problem.

Jensen DUBw10 10" subwoofer

Item # 110DUBW10

Since 1925, Jensen has been a pioneer in home and car electronics, developing landmark products such as the first...

Since 1925, Jensen has been a pioneer in home and car electronics, developing landmark products such as the first...

7 questions - 10 answers

Item # 110DUBW10

Shop all Jensen Component Subwoofers

About the Jensen DUBw10

Bob Bihlmayer

Jensen + DUB

Since 1925, Jensen has been a pioneer in home and car electronics, developing landmark products such as the first high-efficiency loudspeaker and the first car stereo speaker. Now Jensen has partnered with DUB® magazine, the leading publication in the urban automotive lifestyle market, to introduce DUB Edition speakers and amplifiers which feature DUB-designed cosmetics and co-designed components.

Jensen + DUB

Since 1925, Jensen has been a pioneer in home and car electronics, developing landmark products such as the first high-efficiency loudspeaker and the first car stereo speaker. Now Jensen has partnered with DUB® magazine, the leading publication in the urban automotive lifestyle market, to introduce DUB Edition speakers and amplifiers which feature DUB-designed cosmetics and co-designed components.

Jensen DUBW10 10" Subwoofer

Big bass and urban good looks. (Bolts not included)

Big bass and good looks

The 10" DUBw10 subwoofer features a reinforced injection-molded polypropylene cone for optimum stiffness and maximum low-frequency output. Teamed with a high damping rubber surround, the sub gives you DUB-approved performance in a stylish and affordable package. The DUBw10 also features special venting for heat dissipation, a ceramic-ferrite magnet, and a heavy-duty stamped steel basket to give rigidity to the entire structure. The DUB-derived cosmetics include new dust caps, a new finish, and a stylish grille, so you get big bass and urban good looks in one package.

READ LESS

Product highlights:

  • 10" subwoofer with 2" voice coil
  • reinforced injection-molded polypropylene cone with high damping rubber surround
  • vented Nomex fiber blend spider with stitched leadwires
  • ceramic-ferrite magnet
  • stamped steel basket
  • grille included
  • power handling: 50-250 watts RMS (1000 watts peak)
  • impedance: 4 ohms
  • efficiency: 86.5 dB
  • frequency response: 25-250 Hz
  • mounting cutout: 9-1/4"
  • top mount depth: 4-3/4"
  • sealed box volume: 0.77 cubic feet
  • ported box volume: 0.65-1.25 cubic feet
  • warranty: 1 year
  • MFR # DUBW10

What's in the box:

  • One 10" Single voice coil subwoofer
  • Grille
  • Manual (English/ French/ Spanish)

Customer reviews for Jensen DUBw10

Loading reviews...

Average review:

4.5 out of 5 stars
70 reviews

Thanks for submitting your review

Filter by rating

Customer photos

Customer provided image, click to load a larger version.
Customer provided image, click to load a larger version.

Sort reviews

Sort by:
Items per page:
View page:

Verified customer (What's this?)
Verified employee review (What's this?)

Reviewed on Samsung.com

This review was collected as part of a promotion

Pros:

Cons:

Crutchfield response
Customer provided image, click to load a larger version.
<< >>

Product Research

Features

Woofer Cone: The Injection Molded Polypropylene (IMPP) woofer cone is rigid and lightweight. The Nitrile Butadiene Rubber (NBR) surround is resistant to ultraviolet rays, temperature extremes, and humidity to add to the speaker's reliability and longevity.

Binding Posts: The spring post speaker terminals will accept single banana plugs, pin connectors, or bare wire up to 10 gauge.

Sealed Box Volume: Jensen recommends three sealed box sizes, which they label:

  • Thumpin': 0.5 ft³; F3=44 Hz; Qtc=1.1
  • Hard Hitting: 0.75 ft³; F3=42 Hz; Qtc=0.95
  • Bangin' Bottom End: 1.0 ft³; F3=39 Hz; Qtc=0.9

Vented Box Volume: Jensen recommends three ported box sizes, which they label:

  • Thumpin': 0.65 ft³; 2.5" diameter x 14.5" long port tube; Fb=35 Hz; F3=39
  • Hard Hitting: 0.85 ft³; 2.5" diameter x 13" long port tube; Fb=32 Hz; F3=36
  • Bangin' Bottom End: 1.1 ft³; 2.5" diameter x 11.25" long port tube; Fb=30 Hz; F3=32

Loading accessories...

Customer Q&A

7 questions already asked

Q
Hello I have a 2001 cadillac deville I want to replace the rear deck subwoofer. I kinda jumped the gun by already purchasing this sub, that deal was too good, without figuring if I can use it in my caddy? Crutchfield shows it fits my dimensions. I don't need an external amp do I? Thank you for any help
avery j  May 27, 2018
1 answer
A
The Jensen DUBw10 does fit within the factory subwoofer mounting space but you will need to custom fabricate an adapter bracket/spacer to secure it in the stock mount. Yes, you will need an aftermarket amplifier to power it properly. The stock amp isn't enough to power any aftermarket woofer. For additional assistance and personalized recommendations, feel free to contact us directly by phone or through our online chat service: https://www.crutchfield.com/support/ContactUs.aspx
ryan  Jun 06, 2018 (Staff)
Q
Say I have 2 of these, and I'm planning to put them in a ported box. I have an 840 watt 2 channel bridgable amp. Will this work for them? If not, what wattage amp would I need to push them without bridging?
andrew  Oct 21, 2017
2 answers
A
Is that 840 Watts Max if the RMS is 420 then two tens should work very well
craig  Oct 22, 2017
A
I have two of them and they worked great and I have pioneer amp on my they are 900w and I love them I have 2200w in my car so have a great time with them
howard  Oct 21, 2017
Q
Does it come with silver cage on photos?
aaron  Mar 27, 2017
1 answer
A
Thanks for your question. Yes the sub comes with the silver grille as shown. Bolts are not included. You can find this information on the main product page under "What's in the Box". Hope this helps.
kenneth  Mar 27, 2017 (Staff)
Q
Are these shallowmount subs?
melvin  Jan 23, 2017
2 answers
A
No, they are not shallow mount. The one I bought lost its magnet over a bump and was not repairable, replaced it with a cerwin-vega that was better constructed, I don't recommend these subs.
lester c.  Jan 27, 2017
A
No they are four and three quarters of an inch when mounted on the top
craig  Jan 26, 2017
Q
If I buy 2 of these and boxes for them both what else will I need? chords? an amp? any recommendations on a type of amp and about how much I should pay for one. also are these considered "big" subs if you have 2? how hard are these to install? thanks for answering like 5 questions :)
louis  Dec 15, 2016
1 answer
A
Thanks for your question. For information on selecting the best amp for your subs and what you will need for your installation I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They will be able to help determine the differences between the models and help you make the best choice for your system.
kenneth  Dec 16, 2016 (Staff)
Q
How much of an amplifier in terms of power do I need if I have a pair of these in an enclosure? Going in a 1999 Chevrolet Silverado extended cab Z71.
donald  Mar 03, 2016
2 answers
A
Installed two with a 1000 W max (480 rms) mono amp. More of a budget package but still sounds really good and added some much needed bass.
brian  Mar 04, 2016
A
If they are in the same chamber what I mean by there is no divider in the box then you can only put a maximum of 250 watts RMS if the box is ported and is smaller than the recommended ported size then I recommend you reduce the power level to compensate for the size of the box if it is divided in the middle you can put 250 watts to each speaker also I would recommend a 500 watt amplifier and if the box is sealed and has a divider each one is separate in its own chamber I recommend you go 10% higher than what the RMS is so that would be around 275 300 max for each speaker RMS it is a nice well built speaker good luck but I recommend that you really follow the diagrams that are given to you the specs for the best performance try not to deviate from them no more than 10% on the largest side Or 10% on the smaller side
craig  Mar 04, 2016
Q
Port size and length ? I would like to build a box for this . must it be ported ?
wesley  Oct 12, 2014
1 answer
A
We have not received any answers from other customers on your question. I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They should be able to help answer your question.
kristina  Oct 12, 2014 (Staff)
SHOW MORESHOW LESS

Loading articles...

Compare the sound