FlashLogic FLCAN Module
Connects a Code Alarm security system to your vehicle's databus interface
Item # 220FLCAN | MFR # FLCAN 64
$79.99 Earn up to 80 Rewards points
Offers & Financing
Ask an expert
Our VA-based experts can help.
Our take on the FlashLogic FLCAN Module by Crutchfield's Ken Nail
Installing an alarm system used to involve tapping into a few wires, but modern vehicles use databus systems that carry a wide range of signals through a single cable. Instead of tying up your day with endless wire rerouting and relay installation, FlashLogic's FLCAN module provides an easier alternative to installing a security or keyless entry system in over 38 different vehicle brands and over 3400 vehicles in all.
This module connects to your vehicle's databus interface, enabling communication with any Code Alarm keyless entry or security system. This module also works with many other aftermarket alarm systems.
Important: If you know how to use a multimeter and have experience working with your vehicle's electrical system, you should be able to install this car security equipment. If you're unfamiliar with installing car security equipment, please speak to one of our Advisors before attempting this installation.
This interface can save you lots of time when you install a Code Alarm system in most vehicles. For a limited time, you can save up to $80 on the interface if purchased with your Code Alarm system. Chat or call us at 1-888-955-6000 to see if the interface will work with your vehicle.
- doorlock/alarm integration module
- requires splicing into vehicle's factory wiring
- warranty: 60 days
- Our 60-day money-back guarantee
What's in the Box:
- FLCAN module
- 19" DBI port cable (4-pin with black/red connectors)
- 19" DBI port cable (4-pin with black/brown connectors)
- 24" Standard wiring harness (4-pin with black connector and red/black/blue wires)
- 18" Wiring harness (with black connector on one end and bare wires on other end)
- 24" Wiring harness (with blue connector and 3 white wires)
- 24" Wiring harness (with white connector and 3 yellow wires)
- 24" Wiring harness (with white connector and 7 orange/pink wires)
- 24" Wiring harness (with white connector and 6 blue/green/gray wires)
- Card with instructions for obtaining install guides and software downloads
Arrived earlier than anticipated very easy to install it is truly a plug and play device took me about 30 mins but that's because I never prepare for the job quite like I should
Dan, Oil City, PA
FlashLogic FLCAN Module Reviews
Average Customer Review(s):
Thanks for submitting your review
Overview: The FlashLogic FLCAN Databus Interface Module communicates with your vehicle's Databus to provide plug-in capability between the module, and the Code-Alarm security system for various functions. Typical functions include passive anti-theft bypass (transponder, VATS, Passlock, PK3,etc), factory keyless entry controls, factory alarm arm/disarm, door trigger status, tach signal, dome light supervision, trunk/hatch open. Compatibility and available functions vary depending upon year, make, and model of vehicle.
Note: Before installing, the FlashLogic module will need to be configured for your specific vehicle via web-update. Some splicing into factory wiring will be required, (generally 2-6 connections).
Compatibility: The FLCAN supports many late model vehicles from 1997 to present, working with some 40 brands and a total of over 3400 vehicles. At the time of purchase, compatibility with your specific vehicle will be determined, and the FlashLogic module will be programmed with the proper firmware. The vehicle-specific installation guide can be downloaded from the FlashLogic website.
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.
Why did you buy this?
Chat assistant recommendation, I believe it needs to be flashed for my vehicle before shipping. [ RI Photographer Aug 26, 2018 ]
because cody said I needed it to install remote start in a 2014 silverado [ Jack Mar 28, 2018 ]
This is a great interface to use between a viper system and your car's data bus. [ John Feb 06, 2018 ]
Recommended for compatibility [ ROBERT Nov 28, 2017 ]
Recommended by Crutchfield representative. [ William Dec 16, 2016 ]
Recommended by online help Bryce to install on my wifes 2009 toyota corolla. Bryce was a big help. [ Sean Dec 08, 2016 ]
A great bypass module for remote start that will work with any remote start on the market. Great options for any vehicle application. Easy to install. [ DARREN Nov 16, 2016 ]
The help from the technology department at Crutchfield was out standing [ Dean Oct 26, 2016 ]
I got this to help make my install less time consuming and more efficient [ Cristian Sep 16, 2016 ]
Because the sales representative that I talked to found the information needed to install this remote car starter and this was needed to complete the installation. [ P Jul 04, 2016 ]
Previous owner bought the alarm system from crutch field . Alarm was never installed , owner handed the system to me when I bought this vehicle from him. I did a crutchfield chat and Troy answered what I was missing to install this alarm system on my vehicle. Thank you I appreciate the help!!!! Crutchfield is number 1!!!!! [ Richard Jun 04, 2016 ]
Easy Install [ M Apr 24, 2016 ]
Needed this to install remote starter hope it works techeck said it will go smooth on the installation. [ Andrew Jan 20, 2016 ]
Suggested by Crutchfield tech advisor, because I wanted to ensure my stock security system would still work with the new remote starter, and other reviews all said how easy it made the installation. We'll be trying this ourselves when it arrives. [ Julia Jan 17, 2016 ]
Recommended by David for ease of installation of Viper alarm system [ SCOTT Dec 29, 2015 ]
It was advised for the installation. [ MICHAEL Dec 12, 2015 ]
4 questions already asked
Only if vehicle ac/heat control is set for operation [ Catherine May 30, 2018 ]
You'll have to leave either the AC on and or the Heat on.... that way when you do activate the remote start it is already running.... it'll run for 15 minutes on the remote start mode..., [ Richard May 30, 2018 ]
Yes it is..... I've installed this in two of my vehicles!!!! [ Richard Feb 22, 2018 ]
For additional details on fit or installation please contact an Advisor by phone (1-800-324-9695) or online chat. They will be able to pull up your vehicle and give you the details on if this will integrate and what you will need for an installation in your vehicle. [ Kenny Feb 27, 2016 ] Staff
can you send me link for live chat [ uros Jan 22, 2014 ]
You will want to contact an Advisor by phone (1-800-324-9695) or online chat to discuss compatibility with your current system. They will be able to pull up your gear and see if this will integrate. If it does not, then they will also be able to discuss other options with you. [ Jeff Jan 22, 2014 ] Staff