Sennheiser CH 650 S
Balanced cable for Sennheiser HD 650/HD 600 headphones
California customers: click here for your Proposition 65 warning.Please
Our take on the Sennheiser CH 650 S by Crutchfield's David Brown
Make a strong connection with Sennheiser
Sennheiser has developed the ideal link between two of its best-sounding headphones and their high-performance headphone amplifiers. The CH 650 S is a high-quality balanced cable designed for the HD 650 and HD 600 headphones. Replace the stock cable with the CH 650 S and connect it to the Sennheiser HDVD 800 or HDVA 600 to open up a world of audiophile delights for your ears to revel in.
This cable's four-pole XLR plug preserves the symmetrical signal flow from your Sennheiser amp through two pairs of oxygen-free copper leads all the way to the independent left- and right-earcup connectors. This results in very precise signal transmission with almost no distortion, so you can maximize the sonic potential of your headphones and amplifier. You'll enjoy clean, wide-open sound with fine detail shining through and virtually no noise.
- balanced headphone cable with 4-pole XLR connector
- left- and right-channel 2-pin mini-connectors designed for connection to the Sennheiser HD 650 and HD 600 headphones
- allow balanced connection to the Sennheiser HDVA 600 and HDVD 800 headphone amplifiers
- two pairs of oxygen-free copper straight leads maintain a symmetrical signal flow to each channel
- gold-plated contacts
- length: 9.8 feet (3 meters)
- weight: 3.4 oz.
- warranty: 2 years
- Our 60-day money-back guarantee
What's in the Box:
- 10' (3 meter) Headphone cable for HD 650 and HD 600 headphones (with left and right 2-pin connectors on one end and one XLR-4 connector on the other end)
Sennheiser CH 650 S Reviews
Average Customer Review(s):
Thanks for submitting your review
Overview: The Sennheiser CH 650 S is a high-end cable for the HD 650 and HD 600 audiophile-grade headphones. It is 10' (3 meters) long, with left and right 2-pin connectors on one end and a single XLR-4 connector on the other end. The jacket is made of a high-quality, low-friction material to minimize friction and distortion picked up through cable contact.
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.
Why did you buy this?
A safe secure choice for Sennheiser headphones [ Vince Feb 22, 2018 ]
1 question already asked
The ends that go into the headphones are obviously for the Sennheiser. The other end is generic should work with standard XLR jacks. Hope that helps. [ SAI Apr 02, 2016 ]
It can be used with any balanced 4-pin amplifier. [ Jay Mar 15, 2016 ]
Yes, it's possible if the amplifier comes with 4 pin XLR jacks. [ Rosmadi Mar 15, 2016 ] Works for Sennheiser