Features

Overview: The Yamaha STAGEPAS 600BT is a 680 watt portable PA system that includes a 10 channel powered mixer, two 10" speakers, Bluetooth input, 3-band EQ, built-in SPX digital reverb, feedback suppression, and much more. This all-in-one PA system is compact and light enough to carry by hand and features a detachable powered mixer that allows you to keep it within reach during your performance. With 2 mic inputs, 2 mic/line inputs including one that accepts instrument level signals, 3 sets of stereo input channels, auxiliary input for portable devices, and Bluetooth audio streaming, the 600BT is perfect for individual musicians, small performing groups, and presentations.

Mixer: The included 10 channel powered mixer is designed to snap into the back of one of the speakers for transportation, but can be removed and placed near you for ease of parameter changing during a performance.

• Channels 1 - 4: The first 4 input channels are mono and can accept mic or line level signals, with 1 and 2 using an XLR jack while 3 and 4 have XLR/1/4" combo jacks. Channel 4 includes a Hi-Z switch for running instrument level signals directly into the mixer without the need for a DI box. Each of these has a 3-band EQ with the High control shelving at 8 kHz, the Mid control peaking at 2.5 kHz, and the Low control shelving at 100 Hz, all with +/-15 dB range. These 4 inputs include individual Reverb amount knobs that control the amount of Reverb/Echo for that channel when the Master Reverb/Echo is applied. Each channel also includes a Level control.
• Channels 5 - 10: Channels 5/6, 7/8, and 9/10 are configured as stereo inputs, but can also be switched to mono with each channel's ST/Mono button. All 3 of these channels include dual 1/4" inputs, that accept line-level signals, with Channels 7/8 also including stereo RCA jacks. Channels 9/10 include an 1/8" stereo input for running a portable device through the mixer and also double-up as the Level control for any Bluetooth audio being streamed in. These channels also include 3-bands of EQ and their own Level controls.
• Master Section: This section includes a Master Level for controlling the overall output volume. This works in conjunction with a 6-segment LED output level meter that includes a peak/limiter indicator. There's a Master EQ knob that varies the output equalization from Speech (all the way to the left - least amount of bass), to Music (mid point in knob travel), to Bass Boost (turned all the way to the right). A single Reverb Type/Time knob determines both the type of effect, with choices being Hall, Plate, Room, and Echo, and the amount for whichever one is selected. A feedback switch with corresponding LED is provided to automatically suppress any feedback using an internal 7-band notch filter. A master Reverb On with LED indicator can quickly switch the Reverb to all channels off and on, and a Phantom switch with LED will activate +30 volts of phantom power to Input Channels 1 and 2. The Master section also includes a Monitor Out Level control for adjusting the signal level from the Monitor Out jacks, if being used. Other functions include the main Power button and a Bluetooth button for activating and pairing a Bluetooth audio device.
• Output Jacks: Two 1/4" jacks provide output connections for the two speakers, using the included 19.5' cables. A set of Left/Right 1/4" Monitor outputs is provided. These output the main mix signal before it runs through the Speaker EQ, the Master EQ, the Master Output level, and the output amplifier. A single 1/4" Subwoofer jack is provided that, if used, applies a 120 Hz cutoff to the Main speaker outputs while sending those frequencies out to a subwoofer (sold separately). The Output section also includes a Reverb Footswitch jack that allows an unlatched-type footswitch to be used to toggle the Reverb on and off.

Speakers: The Yamaha STAGEPAS 600BT includes a pair of two-way PA speakers, each with a 10" woofer and a 1.4" high-frequency compression driver, and able to handle up to 340 watts peak power each. Their bass-reflex enclosure design can provide up to 90˚ of horizontal and 60˚ of vertical coverage, when standing, and 50˚ of coverage when laid on their side as a floor monitor. The back of one speaker acts as the dock for the powered mixer and the other speaker's back compartment is a convenient storage space for the power cord and speaker cables. Each speaker has a built-in carry handle on the top for portability, as well as a 35 mm socket on the bottom for pole mounting. The pole sockets also include quick-set/release StageLoks for a secure attachment and can accommodate pole-mounts from 34.8 mm to 35.2 mm in diameter.

Specifications:

• Inputs: 4 Mono mic/lines, 6 mono / 3 stereo lines
• Phantom Power: +30 V (CH 1 and 2)
• Outputs: L/R 1/4" Speaker outputs, L/R 1/4" Monitor outputs, Subwoofer output with auto HPF.
• Hi-Z Inputs: Ch 4
• DSP: SPX digital reverb (4 program, parameter control)
• Maximum Output Power: 680 Watts (340 W + 340 W, Peak), 560 W (280 W + 280 W, Continuous)
• Channel EQ: High - 8 kHz high-shelf, Mid - 2.5 kHz peaking, Low - 100 Hz low-shelf, +/-15 dB
• Frequency Range (-10 dB): 55 Hz - 20 kHz
• Speakers:
  • Enclosure: 2 Way bass-reflex type
  • Low Frequency Driver: 10" Woofer
  • High Frequency Driver: 1.4" Voice-coil compression driver
  • Pole Socket: 34.8 mm - 35.2 mm with StageLoks
• Nominal Coverage:
  • Horizontal: 90˚
  • Vertical: 60˚
  • Floor Monitor: 50˚
• Maximum Output Level (1m on axis): 129 dB SPL per speaker
• Bluetooth:
  • Version: 4.1
  • Supported Profile: A2DP v. 1.2
  • Wireless Output: Bluetooth Class 2
  • Maximum Range: 33 Ft. (10 m)
  • Transmission Frequencies: 2402 - 2480 MHz
  • Maximum Output Power: 4 dBm (2.5 mW)
• Dimensions:
  • Speakers: Width - 13.25", Height - 21.50", Depth - 12.63"
  • Mixer: Width - 13.63", Height - 7.75", Depth - 5.38"
• Power Requirement: 100V - 240V, 50/60 Hz
• Power Consumption: 35W (Idle), 100W (1/8 power)
• Weight:
  • Overall: 56.4 lbs.
  • Speaker: 24.0 lbs. x 2
  • Mixer: 8.40 lbs.