Our take on the Klipsch CDT-3650-C-II by Crutchfield's Marshall Chase
Treat yourself to top-notch sound with a speaker that blends seamlessly into your home's décor. The Klipsch® CDT-3650 II installs in your ceiling, so it won't take up one inch of floor space. And its high-tech design and solid construction make it a great choice for movie and music lovers alike. You can use multiple CDT-3650 IIs for surround sound in an all-Klipsch home theater, or install them in pairs for stereo listening with your multi-room audio system. Either way, you'll enjoy crisp, clear Klipsch sound without the clutter of conventional speakers.
Ready, aim, music!
The '3650-C-II's 1" aluminum tweeter gives you 100-degree dispersion, and it swivels, so you can aim the sound precisely where you need it to go. You can even rotate the 6-1/2" woofer a full 360 degrees and tilt it up to 15 degrees in any direction. This flexibility gives you full, detailed sound no matter where you place the speaker. Plus, a tweeter attenuation switch lets you adjust the sound to suit your personal taste and your room's acoustics.
Horn technology for room-filling sound
Because high-frequency sounds are more directional than bass frequencies, it's especially important to target them right toward your ears. Klipsch places their tweeter inside a flared opening, known as a "horn." This design brings out details in everything you listen to, while reducing reflections that can color the sound.
Slimmer chance of being seen
The CDT-3650 II keeps a low profile with its SlimTrim™ grille. The visible frame size is reduced by 90% and grille depth is reduced by 80% over previous designs, for a nearly flush finish that blends in beautifully. The paintable aluminum, magnetic grille attaches securely with ease to virtually eliminate resonant distortion.
An optional in-ceiling bracket is recommended for installing the CDT-3650-C-II in new construction.
- 1" tweeter with with swiveling Tractrix® horn
- pivoting 6-1/2" IMG woofer
- power handling: up to 50 watts RMS (200 watts peak)
- frequency response 63-23,000 Hz (±3dB)
- sensitivity 93 dB
- 8-ohm impedance
- paintable SlimTrim magnetic grille
- treble attenuation switch
- cutout dimensions: 8-3/16" diameter
- mounting depth: 4-1/2"
- warranty: lifetime
- Our 60-day money-back guarantee
What's in the Box:
- Ceiling-mount speaker
- White metal mesh grille
- Cardboard template
- Owner's Manual (En/Fr/Sp)
Super in ceilings Clean & crisp
Try these, Irvine, CA
Klipsch CDT-3650-C-II Reviews
Average Customer Review(s):
Thanks for submitting your review
Features and Specs
|Quantity in Package||Single|
|Power Range (Watts)||50|
|Connector Type||Spring clips|
|Parts Warranty||Ltd. Lifetime|
|Labor Warranty||Ltd. Lifetime|
Controlled Dispersion Technology (CDT): The Klipsch CDT-3650-C II in-ceiling speaker features a patent-pending gimbal mechanism, known as Controlled Dispersion Technology (CDT). The tweeter and woofer are independently adjustable, allowing both the high and low frequencies to be directed toward the listening area.
High Efficiency: The high-efficiency design of the Klipsch in-ceiling speakers allows you to get much more output than most in-wall and in-ceiling speakers. Due to the long speaker wire runs that are common in whole-house audio systems, the power coming from the amplifier is significantly reduced by the time it reaches the speakers. The 93dB efficiency of this speaker means it will play much louder at low power than other less-efficient speakers.
2-Way Driver Design: The Klipsch CDT-3650-C II uses a high-quality 1" aluminum dome compression driver (tweeter) mated to an exclusive Tractrix Horn, combined with a 6.5" copper-colored IMG (injection-molded graphite) woofer in a 2-way design.
- Tweeter: There is a 1" aluminum dome tweeter mated to a swiveling 100° Tractrix Horn. The swiveling horn design dramatically increases efficiency by enabling the speaker to produce more output using less energy. The horn-loaded tweeter allows you to point the sound to a specific location, and has more controlled directivity than a conventional dome tweeter.
- Woofer: The 6.5" copper-colored IMG (injection-molded graphite) woofer can rotate a full 360°, and then shift 15° in any direction. The solid Injection Molded Graphite woofer cone has been strengthened for even more accurate bass reproduction.
Speaker Terminals: The speaker has a pair of spring clips that can accept up to 12-gauge wire or pin connectors.
ABS Basket/Frame: The CDT-3650-C II has a sturdy ABS basket and frame. The frame can be painted to match any decor.
SlimTrim Magnetic Grille: With an all new grille, the visible frame size is reduced by 90% and grille depth is reduced by 80% over the previous design, for a more edge-to-edge consistent look that blends in with the wall more attractively. The new aluminum, paintable, magnetic grille attaches tightly and securely with ease to virtually eliminate resonant distortion.
Power Specifications Note: The manufacturer has specified the maximum power handling of this speaker as 50 watts RMS (200 W Peak). Klipsch has also published a recommended amplifier power specification as 100 watts.
Installation: The speaker can be installed in new or existing construction. It requires a cutout diameter of 8.1875". For new construction, purchase of the IK-650-C installation kit (714IK650C, sold separately) is highly recommended. For existing construction, the speaker should be installed in drywall at least 3/8" thick. It can also be installed in a drop ceiling (2' x 2' or 2' x 4' ceiling tiles only). In both cases, to maximize the acoustic performance of the in-ceiling speakers, Klipsch recommends you replace the original mounting panel with 1/2" or 3/4" plywood or MDF. A cardboard template is included to assist you in making the cutout.
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.
Why did you buy this?
it's the biggest speaker that fits in the ceiling spaces we have [ Craig Apr 28, 2018 ]
Have Klipsch speakers already and they are great. Buying more for a second home. [ Martin Jan 05, 2018 ]
Quality [ ANTHONY Dec 23, 2017 ]
Brand loyalty [ Adrian Nov 24, 2016 ]
To be compatible with the other speakers in my theater room design. [ Stanley Nov 17, 2016 ]
klipsch has a good name, and these are solid in wall speakers [ I Nov 01, 2016 ]
Current user of Klipsch speakers and these speakers have excellent ratings. I love the Klipsch speaker sound and high quality. [ ADRIAN Oct 07, 2016 ]
Chosen by my stereo designer. [ Nick Sep 15, 2016 ]
Great sound quality. Klipsch speakers always deliver! [ Brian Dec 09, 2015 ]
1 question already asked
1 answer The speakers I have installed in the ceiling of my house aren't working. I already pulled them out to check and make sure they're hooked up correctly. One of the speakers is hooked up but the other speaker wasn't connected correctly. The wires were crossed, negative to positive and vise versa. Would this cause issues to the speakers? [ Mike Dec 25, 2015 ]
For most speakers connecting them backwards like this would cause some issues, but the speaker may still work. If you purchased the product from Crutchfield, feel free to contact our Tech Support team. They can troubleshoot with you. Our toll-free Tech Support number is printed on your invoice, and is also available under the "My Orders" tab in the "My Account" section of our website. [ Jeff Dec 28, 2015 ] Staff