Steel wall mount for PA speaker — tilt adjusts 0° to 22°
Our take on the K&M 24110 by Crutchfield's Buck Pomerantz
Hang a speaker where it needs to go
Need to mount a PA speaker on a wall? K&M's 24110 speaker wall mount holds a speaker weighing up to 110 pounds firmly and safely, right where you want it. You can adjust the support arm to aim your speaker in eleven different tilt angles from horizontal to 22 degrees down, ensuring your audience gets good sound coverage.
Standard-size speaker pole mount
You set your speaker onto the locking pin on the 24110's support arm, like you would with a regular speaker stand. You then lock the speaker in place with the tightening nut, which expands the pin to grip the inside of the speaker's mounting socket. Speaker secured!
- steel wall mount for a PA speaker
- supports up to 110 pounds (50 kg)
- holds speaker at a downward tilt angle of 0 to 22 degrees in 11 increments
- mounting pin fits standard 35-37 mm speaker pole sockets
- expanding pin grips speaker socket
- black powder-coated steel construction
- weight: 6.2 lbs
- warranty: 5 years
- Our 60-day money-back guarantee
What's in the Box:
- Extension arm
- Wall tube
- Support tube
- 3 Bolts (M6 x 60mm)
- 3 Nylock nuts
- 8 Plastic bolt caps
- 4 Large flat washers
- 6 Small flat washers
- 2 Metal brackets
- 4 Plastic bracket covers
- General Safety and Mounting Notes
- Packing card
K&M 24110 Reviews
Average Customer Review(s):
Thanks for submitting your review
Overview: The König & Meyer (K&M) Speaker Wall Mount (24110) is designed for mounting a single speaker equipped with a 35mm pole socket. The mount's wall tube, support tube and extension arm are made of sturdy steel tubing, giving it a load capacity of over 110 pounds (50 kg). The angle of the speaker can be adjusted from 0° to 22°. The mount comes unassembled, and comes with all the necessary assembly hardware. Hardware for attaching the mount to a wall is not included.
Adjustable Angle: The wall mount's extension arm has an adjustable support that can be moved up or down to increase or decrease the angle of the arm. There are 11 support arm positions to set the extension arm angle at 0°, 2.5°, 5°, 7.5°, 10°, 12°, 14°, 16°, 18°, 20° or 22°.
Mounting Post: The 24410 Speaker Wall Mount has a post on the extension arm that fits into the speaker's 35mm pole mount socket. For speakers that have slightly larger mounting sockets (up to 37mm), you can enlarge the diameter by tightening the bolt with a wrench.
Safety Precautions: The 24110 Speaker Wall Mount will safely hold a large heavy speaker when properly mounted in solid wood, masonry, concrete, or brick, using appropriate screws and wall anchors (not included). The speaker must be mounted, and the angle adjusted, by technicians who have the physical capacity for the procedure.
- Maximum Load: 110.2 pounds (50 kg)
- Mounting Post: Diameter 35-37mm, Length 3.438"
- Extension Arm: Width 1.607", Height 0.821 (4.848" including mounting post), Length 19"
- Wall Tube: Width 1.563", Height 0.75", Length 18.063"
- Support Tube: Width 1.875", Height 0.938, Length 11.332"
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.