Sanus Classic MMT16b
Tilt wall mount for 32"-47" TVs
Our take on the Sanus Classic MMT16b by Crutchfield's Ralph Graves
A tilt mount for smaller TVs
The Sanus Classic MMT16b mount features fingertip control so you can easily adjust the tilt without tools. You can tilt the mount up to 15º up or down, making it easy to reduce glare and improve viewing angles. The mount can support TVs with screen sizes from 32”-47" and weighing up to 80 lbs. Once you've secured the brace to the wall, the mount just slides into position. Safety locks that close with audible clicks let you know it's securely in place. The mount can be shifted slightly left or right on the wall plate so the TV is centered, even if your wall studs are off-center.
Will this mount work with my TV?
Use the Sanus MountFinder™ to see a list of mounts that work with your specific TV.
Where do I drill the holes?
Tell the Sanus HeightFinder™ Installation Assistant how high you want your TV, and it tells you exactly where to drill.
- designed for TVs 32"-47"
- supports up to 80 lbs.
- vertical tilt range: ±15° (may vary with size of TV)
- easy one finger tilt adjustment
- stud-mounting required
- mounting hardware included
- 15-9/16"W x 16-15/16"H x 2"D
- warranty: 5 years
- Our 60-day money-back guarantee
What's in the Box:
- 2 TV brackets
- Four M4 x 12mm bolts
- Four M4 x 35mm bolts
- Four M5 x 12mm bolts
- Four M5 x 35mm bolts
- Four M6 x 12mm bolts
- Four M6 x 20mm bolts
- Four M6 x 35mm bolts
- Four M8 x 16mm bolts
- Four M8 x 20mm bolts
- Four M8 x 35mm bolts
- Four M4/M5 washers
- Four M6/M8 washers
- 4 Spacers
- Three 5/16" x 2-3/4" lag bolts
- 3 Lag-washers
- 3 Wall-anchors
- Instruction Manual
Easy to install - nice stand.
Edward, Uniontown, OH
Sanus Classic MMT16b Reviews
Average Customer Review(s):
Thanks for submitting your review
TV Capacity: The Sanus Classic Series MMT16B wall-mount bracket is designed to support flat-panel TVs from 32" to 47", weighing up to 80 lbs.
VESA Bolt Pattern: The Sanus MMT16B wall-mount bracket accommodates a horizontal hole spacing on back of the TV of 50mm-405mm and a vertical hole spacing of 50mm-405mm. The MST16b comes with M4, M5, M6, and M8 size bolts of differing lengths to mount the bracket to your TV. It will accommodate the following VESA hole patterns in accordance with industry standards set by the Video Electronics Standards Association:
- 50mm x 50mm
- 100mm x 100mm
- 200mm x 100mm
- 200mm x 200mm
- 300mm x 200mm
- 300mm x 300mm
- 400mm x 300mm
- 400mm x 400mm
Low-Profile: Its low-profile design positions the TV just 2" from the wall for a clean appearance.
Tilting Design: The Sanus Classic Series MMT16B tilting mount gives you the best view of your wall-mounted television from the floor or couch. Innovative technology provides up to 15º of tilt (10º forward/5º backward) with the touch of a finger, making it easy to reduce glare and improve viewing angles without tools. Tilting the TV also provides easier access to cable connections on back of the television.
Perfect Positioning: Your TV can slide from side-to-side on the MMT16B wall-mount for perfect positioning on the wall. The TV brackets easily shift left and right on the wall plate to allow perfect TV placement, even with off-center wall studs.
Safety Tabs: Once the wall bracket is anchored to the wall studs and the two TV brackets are attached to the back of your television, the two TV brackets hook into the wall bracket. Integrated safety tabs on the TV brackets provide a safe and easy connection to the wall bracket you can hear. There is a strap on each TV bracket which allows you to disengage the safety tabs and remove your television from the wall bracket.
Construction: The MMT16B bracket is constructed of heavy-gauge steel with a durable powder-coated black finish. This solid construction provides strength and increased safety.
Wall-Plate: The wall plate must be mounted to a wall stud or anchored to a brick, block, or concrete wall using the supplied lag bolts (and wall-anchors).
Installation Tools: The following tools are recommended for mounting the MMT16B:
- Tape measure
- Stud finder
- 7/32" Drill bit (for wood stud)
- 3/8" Drill bit (for masonry)
- 1/2" Socket wrench
- Screw driver
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.
Why did you buy this?
Good value for price. Meets current need. Allows for expansion to larger TV in future. [ CAROLE Apr 14, 2017 ]
Recommended by the Crutchfield tech advisor, Chad for my flat screen TV. [ JOSEPH Apr 06, 2017 ]
Good reviews and the Sanus brand name. [ Bruce Dec 28, 2016 ]
advisor recommendation [ James Sep 05, 2016 ]
needed a heavy duty mount [ Ronald Feb 04, 2016 ]