Peavey Elements™ 108C
8" weather-resistant surface mount speaker
Our take on the Peavey Elements™ 108C by Crutchfield's Eric Angevine
A powerful outdoor speaker
Peavey loudspeakers are known for their power and clarity. The 108C maintains that legacy and makes it tougher, with an 8" water-resistant woofer and a 2" compression driver in a durable weatherproof cabinet.
Selectable indoor and outdoor EQ settings let you tailor the frequency balance to your specific application. Mounting hardware is included for wall-mounting or "flying" (suspension mounting) the speaker.
Get a free system design
- weather-resistant surface-mounted speaker with 8" woofer and 2" compression driver
- handles 400 watts program power
- wide 75° by 75° coverage pattern
- 120 dB peak SPL
- frequency response: 64-18,000 Hz (±3dB)
- nominal impedance: 8 ohms
- hardware for flying and wall mounting included
- 14"W x 17-5/16"H x 11"D
- weight: 27 lbs.
- warranty: 1 year
- Our 60-day money-back guarantee
What's in the Box:
- One Elements 108C loudspeaker
- 4 Eyebolts (3/8" thread)
- 4 Metal flat washers
- 4 Rubber washers
- Metal cover plate
- Cover plate gasket
- Plastic gland nut (for strain relief)
- 2 Neutrik connector seals (SCDM-SB)
- Loudspeaker System Specifications
- Peavey decal
Features and Specs
|Drivers per speaker||2|
|Woofer Size (inches)||8|
|Tweeter Size (inches)||2|
|System Frequency response||64-18k|
|Peak Power rating||---|
Overview: The Peavey Elements Series of loudspeakers feature IP45-rated weatherproof enclosures that can withstand the elements. The trapezoidal-shaped enclosures are constructed of 1/2" advanced composite fiberboard panels coated with a textured black Hammerhead poly-urea finish. The 18-gauge, powder-coated aluminum grills have a barrier membrane that repels water, yet allows moisture to escape, without affecting the sonic performance of the speaker. Elements Series loudspeakers are recommended for stadiums, arenas, and multi-purpose facilities, as well as houses of worship, live music venues, theaters, gymnasiums, and performing arts centers.
Elements 108C Drivers: This Peavey Elements 108C loudspeaker has a water-resistant 8" heavy duty aluminum cone woofer with a synthetic rubber surround. The woofer is mounted into a vented enclosure. The high frequency section features a 2" RX22 titanium diaphragm compression driver with a 0.875" exit and 50.8mm voice coil. The compression driver is mounted in a 75° (H) x 75° (V) Quadratic Throat waveguide. The drivers are crossed over at 2 kHz (12dB/octave).
Connections: The Elements 108C has a recessed input cup with a sealed cover plate for protecting the connections from the elements. The input connection features a pair of 4-pin Neutrik NL-4 Speakon connectors. In addition, there is a 4-position screw terminal strip, wired in parallel to the Speakon connectors, for bare wire termination. A plastic gland nut is included for cable strain relief. An Indoor/Outdoor EQ option allows you to tailor the sound to match an indoor or outdoor installation.
70V Option: An optional, field-installed, 70V transformer is available if you choose to upgrade. The transformer is pre-mounted on a plate that replaces the input cup cover plate. The optional transformer has 100W and 50W taps.
Mounting Options: The Peavey Elements 108C can be mounted in a variety of ways. The speaker has ten 3/8"-16 threaded mounting suspension points (2 top, 3 bottom, 2 each side, 1 rear bottom). Four 3/8" eyebolts are provided for suspending the speaker from above at up to a 45° angle. There are also three sets of four 1/4" x 20 set-screw inserts on the top, rear, and bottom, for use with the Peavey Versamount 35 and the Peavey Elements Pole Mount bracket.
- Frequency Response: 64 Hz to 18 kHz (+/-3dB)
- Usable Low Frequency Limit (-10dB point): 52 Hz
- Power Handling:
- Continuous: 200 watts
- Program: 400 watts
- Peak: 800 watts
- Sound Pressure Level (1W/1M): 91 dB SPL (2.83V input)
- Maximum SPL (1 meter): 114 dB SPL continuous; 120 dB SPL peak
- Radiation Angle: 75° Horizontal by 75° Vertical
- Box Tuning Frequency: 60 Hz
- Impedance: 8.0Ω (nominal)
- Recommended High Pass (Infrasonic Filter): 45 Hz, LR 24 dB/octave
- Width: 10.929" (front), 8.861" (rear)
- Height: 17.25"
- Depth: 13.5"
- Weight: 26 pounds
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.
Frequently Compared With
Peavey Elements™ 108C
8" weather-resistant surface mount speaker$1,099.99 each
JBL Control® 16C/T
6-1/2" commercial in-ceiling speaker$240.00 pair
Passive indoor/outdoor subwoofer
Bose® Panaray® 802® Series IV
Array of eight 4-1/2" full-range drivers for sound reinforcement in a commercial audio system