Plug-in phono preamplifier module for NAD C375BEE and C356BEE integrated amplifiers
Our take on the NAD PP375 by Crutchfield's Dave Bar
Upgrade your NAD C375BEE or C356BEE integrated amp with the PP375 phono preamp module, then fire up your turntable to enjoy exceptional vinyl LP playback. This module adds connections for your turntable onto the amplifier's back panel. Two separate, switchable inputs accommodate both moving magnet and moving coil phono cartridges. You'll get outstanding sonic performance at a reasonable price.
Important note: The installation of this module should be handled by an NAD authorized dealer or an authorized NAD service center. This is not intended to be a user installed accessory.
- separate selectable inputs for moving magnet and moving coil phono cartridges
- THD: <0.009%
- installation should be handled by an NAD authorized dealer or an authorized NAD service center; not intended to be a user installed accessory
- built-in low-frequency rumble filter reduces wasted amplifier power at frequencies below audible levels
- 3-5/16"W x 1-5/8"H x 2-5/16"D
- warranty: 1 year
- Our 60-day money-back guarantee
What's in the Box:
- NAD PP 375 Phono Preamplifier Module
- Flat-flexible cable
- Mounting Instructions
Worked great, not difficult to install yourself, thanks!
George, Wichita Falls, TX
NAD PP375 Reviews
Average Customer Review(s):
Thanks for submitting your review
Product Notice: This item should be installed by an NAD-authorized servicing dealer. It is not intended to be installed by the consumer.
Overview: The NAD PP 375 Phono Preamplifier Module is an add-on accessory for the NAD C375BEE and C356BEE Stereo Integrated Amplifiers. From the factory, the C375BEE and C356BEE have no phono inputs. The PP 375 Phono Module requires installation to replace the dummy plate on the rear panel in order to create an input. Once installed, the module will accept both moving magnet or moving coil cartridges.
Installation: The PP 375 phono preamplifier module installs and mounts inside of the integrated amplifier. The installation should be performed by an NAD-authorized servicing dealer, and not the consumer.
Specifications Tables: The Specification table for PP 375 phono preamplifier module.
|PP375||Moving Coil (MC)||Moving Magnet (MM)|
|Input Overload||>4mV (20Hz-20kHz||>40mV (20Hz-20kHz)|
|RIAA Accuracy||+/- 0.25dB|
|Total Harmonic Distortion||<0.03% (20Hz-20kHz)|
|IHF A Signal to Noise||>76dB (110 Ohms load)||>77dB (IHF cartridge load)|
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.
Why did you buy this?
Purchased the C356 BEE a couple years ago. Purchased a Pro Ject turntable which requires a pre amp. [ richg1390 Jan 28, 2018 ]
I have a High end Audio Technica Turntable and this unit is required to use turntables with this NAD Unit [ John Dec 30, 2016 ]
It's the right price for the right machine. Plus, it's hard to find these in a retailer shop. The places where they sell them are higher end installers and always put on the "hard sell" which I do not appreciate. [ Robert Jul 11, 2016 ]
I have a turntable and having an the preamp integrated with the main amp saves space, and more importantly cabling. [ Harvey Jun 23, 2016 ]
Quality [ Richard Jun 18, 2016 ]