Electro-Voice EVID S10.1D
Dual 10" weather-resistant surface-mount subwoofer for distributed audio systems (Black)
Our take on the Electro-Voice EVID S10.1D by Crutchfield's Eric Angevine
Big time bass, indoors or out
This surface mount subwoofer provides plenty of bass for your business space. The speaker's twin 10" woofers shore up music with powerful, punchy low-end. The subwoofer's cabinet and grille are paintable to match your decor.
Get a free system design
- weather-resistant surface-mounted subwoofer with dual 10" woofers
- handles up to 400 watts continuous power in a distributed audio system
- frequency response: 33-500 Hz (-10 dB)
- sensitivity: 94 dB
- nominal impedance: 4 ohms in mono configuration (8 ohms in stereo)
- 25-5/8"W x 14"H x 19-5/16"D
- weight: 46.3 lbs.
- warranty: 3 years
- Our 60-day money-back guarantee
What's in the Box:
- Terminal input cover
- Two port covers
- Two 4-pin Phoenix (Euroblock) connectors (installed)
- Allen key
- Eight 15mm flat-head screws
- Twelve 10mm screws
- Five mounting-hole covers
- Spare logo
Features and Specs
|Drivers per speaker||2|
|Woofer Size (inches)||10|
|Tweeter Size (inches)||N/A|
|System Frequency response||33-500|
|Peak Power rating||0|
Overview: The Electro-Voice EVID-S10.1D is a compact, high-performance, dual woofer loudspeaker designed for the most demanding professional and commercial sound applications. Ideal for sound reinforcement, restaurants, fitness clubs, theme parks, and bars, the subwoofer is well suited for both indoor and outdoor use. It features two 10 inch high-excursion woofers, capable of handling up to 400 watts continuously, in a durable enclosure that offers high resistance to sun, salt, and moisture. It can be surface mounted or suspended in a variety of ways, and can easily be converted to a 70/100 volt speaker with EV's optional Input Transformer panel (sold separately).
Enclosure: The EVID-S10.1D has been carefully engineered to resist outdoor environments without compromising indoor performance. The cabinet and grill carry an IP54 weather-proof rating out of the box, but if the included port plugs are installed, that rating is upgraded to IP65. The subwoofer includes dual threaded mounting points, on each side of the enclosure, for use with EV's optional U-bracket (sold separately), allowing it to hang straight down from a ceiling. The two pre-installed feet can be removed giving access to five anchor points for suspending or "flying" the speaker. An input terminal cover is also included to protect the two Euroblock wiring connectors from dirt and moisture.
Connections: The rear panel of the subwoofer includes two 4-pin Euroblock (Phoenix) connectors, each accepting up to 12 AWG wire. One provides 2 channels of input, mono or stereo, while the other connector provides a parallel mono/stereo output for additional speakers. A rear-panel Stereo/Mono switch determines the type of input. In Stereo mode, the subwoofer will present itself as two 8 ohm channels, or as a single 4 ohm load in the Mono setting. The output terminals will pass a full-range signal, since the EVID-S10.1D has no internal crossover, but an optional Crossover Input Panel (sold separately) can be added which allows the Output to be high-passed. EV also offers an optional 70/100 volt Transformer Input Panel (sold separately) allowing the sub to be run in a 70/100 volt application. In this mode, any speakers connected to the Output terminals must be 70/100 volt speakers as well. The replacement Transformer panel includes the following tap settings:
- 70 Volt: 15, 31, 62, and 125 watts
- 100 Volt: 31, 62, and 125 watts
- Power Handling: 400W (Continuous)/ 1600W (Peak)
- Maximum SPL: 120 dB
- Frequency Response: 33 Hz - 500 Hz
- Nominal Impedance: (2) 8Ω Stereo Mode, (1) 4Ω Mono Mode
- Sensitivity: 94 dB
- Low Frequency Transducer: Two 10 inch
- Connections: Two removable 4-pin Euroblock connectors
- Dimensions: Width - 25.50", Height - 14.25", Depth - 19.25"
- Weight: 39.5 lbs.
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.
Frequently Compared With
Electro-Voice EVID S10.1D
Dual 10" weather-resistant surface-mount subwoofer for distributed audio systems$615.00 each
JBL Control® 24C/T
4" commercial in-ceiling speakers
Electro-Voice EVID S5.2T
5-1/4" weather-resistant surface-mount speaker for distributed audio systems$315.00 pair
JBL Control® SB2210
Subwoofer with dual 10" drivers for distributed audio systems