Skip Navigation

Samsung WMN-M11E No Gap Wall Mount

Fits 49", 55", and 65" 2017 Samsung QLED TVs

7 Reviews | 3 questions - 6 answers

Overview

Our take on the Samsung WMN-M11E No Gap Wall Mount

The Samsung WMN-M11E No Gap Wall Mount is designed specifically to mount a Samsung QLED 49", 55", or 65" TV (including the Q7F, Q7C, Q8C, and Q9F series). The minimal gap between wall and TV — 0 to 1/4" depending on the TV model — is possible because the part that attaches to the TV fits a carved out area on the back of the set. This video shows how it works (start at the 1:30 mark).

Samsung's "no-gap" mounting solution

The Samsung WMN-M11E No Gap Wall Mount is designed specifically to mount a Samsung QLED 49", 55", or 65" TV (including the Q7F, Q7C, Q8C, and Q9F series). The minimal gap between wall and TV — 0 to 1/4" depending on the TV model — is possible because the part that attaches to the TV fits a carved out area on the back of the set. This video shows how it works (start at the 1:30 mark).

Another surprise from this no-gap design is that it still allows you to tilt your Samsung QLED TV downward 6° to 10°, depending on the size of the TV. This allows you to mount your TV high on the wall (like over a fireplace) and tilt it downward for a better viewing angle.

Product Highlights:

  • designed specifically to wall-mount a 49", 55", or 65" Samsung QLED TV (includes Q7F, Q7C, Q8C, and Q9F series)
  • TV weight limit: 66.5 lbs.
  • mounts your TV to the wall with a gap of 0 to 1/4"
  • tilt mechanism allows you to tilt the TV downward 6° to 10° for a better viewing angle
  • stud-mounting required (included wall bracket plate works with 16" OC studs only)
  • mounting hardware included
  • includes a longer 9-3/4-ft. detachable AC power cord for greater installation flexibility
  • Note: This wall-mount bracket does not support standard VESA mounting patterns and is only compatible with the Samsung QLED TVs listed above
  • warranty: 1 year
  • Our 60-day money-back guarantee

What's in the Box:

  • Wall bracket
  • TV bracket
  • 2 Support brackets
  • 9.75' AC power cord
  • 8 Spacer adapters
  • Four M4 x 14mm screws
  • Four M4 x 8mm screws
  • Six 2.125" (length) screws
  • Four 1.375" (length) screws
  • 6 Large anchors
  • 4 Small anchors
  • 4 Rectangular self-adhesive foam pads
  • 4 Round self-adhesive foam pads
  • 4 Self-adhesive strips
  • 4 Self-adhesive mounting pads
  • 7 White stickers
  • Intallation Guide
  • Additional Installation Instructions
  • Wall-Mount Template
  • "Cautions When Installing" booklet
  • TV bracket diagram
  • Warranty Information

love the wall mount, was a bit trickey on a stacked stone surface but the only way to fly.

craig, Roswell, GA

Reviews

Samsung WMN-M11E No Gap Wall Mount Reviews

Average Customer Review(s):

(7 Reviews)
rewards card
Great Gear Giveaway

Submit a review and enter to win a $350 rewards card

Review this product

Thanks for submitting your review

Most reviews are processed and published within 5 business days. You will receive a confirmation email once your review has been published.

Your Review

Use the stars below to rate the overall product on a scale of 1-5
1500
Upload your photos

Not visible. Email associated with order.
(e.g., Charlottesville, VA)

Additional Fields (optional)

500
500

By submitting this review, you agree to our terms and review guidelines.

Filter by rating

Customer photos


<< >>
Details

Hands-on research

Product Research

Features

Compatibility: The Samsung WMN-M11E No Gap Wall-Mount is designed specifically to wall mount a 2017-2018 Samsung QLED 49", 55", or 65" TV (including the Q9F, Q8C, Q7C, and Q7F series).

Note: This wall-mount bracket does not support standard VESA mounting patterns and is only compatible with the Samsung QLED TVs listed above.

No Gap Design: The Samsung WMN-M11E mounts your Samsung Q8C, Q7C, and Q7F series TV to the wall with a gap of 0 to 0.125"  The Samsung Q9F series TV will have a 0.25" gap or more from the wall. The distance between the wall and the left or right side of the TV may different depending on the wall and installation conditions. A larger gap between the back of the QLED TV and the wall may occur if the wall is not 100% flat or is constructed off angle to the floor (or if the wall-mount installation is done incorrectly).

Note: Eight wall spacer adapters are included if there is protruding part of the wall that requires that you mount the TV further from the wall.

Tilt Mechanism: The Samsung WMN-M11E No Gap Wall-Mount allows you to tilt your Samsung QLED series TV downward 6° to 10°; based on the size of the television. This allows you to mount your TV high on the wall (like over a fireplace) and tilt it downward for a better viewing angle.

Wood Stud & Concrete Installation: The Samsung WMN-M11E comes with the appropriate hardware to mount the bracket to wood studs or a concrete wall. The included wall bracket plate supports 16" OC wood studs (24" OC is not supported) using the supplied hardware. In addition, anchors are supplied for concrete wall installation.

Level Adjustment: Once your QLED TV is installed on the No Gap Wall-Mount, you can level up the TV by adjusting the horizontal level of the WMN-M11E from 1° to 2°. If you cannot level up the TV with this adjustment, then you need to reinstall the bracket to the wall and TV.

9.75' AC Power Cord: The Samsung QLED TV only comes with a detachable 5' AC power cord. The Samsung WMN-M11E No Gap Wall-Mount includes a longer 9.75' detachable AC power for greater flexibility and to make it easier to power your TV. The included AC power cord is fitted with a right-angle AC plug that sits 0.9375" from the wall.

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Accessories
Q & A

Customer Q&A

Crutchfield asked  
Why did you buy this?

fits my 65 Samsung q7c curved tv [ OnaFly  Sep 01, 2018 ]
I purchased a samsung Q7 65" TV, seems to be same product offered on amazon and bestbuy, with a $20 price difference. [ Germano  Aug 15, 2018 ]
Seems a perfect fit for the Samsung Q9 series. And after reading the instructions, it appears to be very easy to install and set up. [ JOHN  Apr 12, 2018 ]
It mounts the QN9 TV so it fits almost flush with wall. [ Theodore E.  Mar 31, 2018 ]
custom wall mount for specific tv [ FREDERICK A  Mar 25, 2018 ]
to mount a new samsung tv [ JohnW  Mar 21, 2018 ]
It fit well with the tv that I would like to mount on my wall. [ Gerard  Dec 31, 2017 ]
No gap [ Francesco  Dec 27, 2017 ]
because it stated that it is made for that type of TV [ CARLO  Dec 11, 2017 ]
Review was good [ Ann  Nov 24, 2017 ]
I chose this wall mount because it is a Samsung item made to perfectly fit my new QLED TV. [ Dave  Oct 29, 2017 ]
Designed for my Samsung Q9 and want flush to wall mount. [ ALAN D  Sep 16, 2017 ]
Great price [ STACY L  Sep 01, 2017 ]
Recommended [ Mark  Aug 29, 2017 ]
wall mounting of Samsung QN65Q7F [ Greg  Jul 24, 2017 ]
I love how close to the wall it mounts. Like a piece of art. [ dale  Jul 07, 2017 ]

3 questions already asked

No. Samsung will be releasing a 'WMN-M12EB" bracket for the 2018 models. We'll add it to the accessories tab for the compatible TV models once we have more information regarding the bracket's pricing and availability. [ Ryan  Apr 05, 2018 ]  Staff
Unclear as we had a professional installer mount our tv. With that said once you get it mounted it's been a great tv and better then expected. [ JOEL H  Jan 01, 2018 ]
Only the Qled models [ HERMAN L  Jan 01, 2018 ]
It is my understanding that this no gap wall mount ONLY works with Samsung QLED televisions. So according to Samsung, this no gap wall mount will NOT work on a Samsung 65MU8000 65" smart tv. [ Ron  Dec 31, 2017 ]
I've looked over all the information we have on this mount and those TV's. I cannot find anything stating they will work together. You might reach out to Samsung to see if they have any newer information on it. My Bio: http://www.crutchfield.com/Support/Bio.aspx?bio=101 [ Paul  Nov 13, 2017 ]  Staff
This is only for Q7,Q8 &Q9 tv's up to 55" I don't know about equivalent mounts but this thing sure is sweet. [ Dave  Nov 08, 2017 ]
Articles

Searches related to the Samsung WMN-M11E No Gap Wall Mount Fits 49", 55", and 65" 2017 Samsung QLED TVs