Outdoor home XM antenna
California customers: click here for your Proposition 65 warning.Please
Our take on the Terk XM6 by Crutchfield's Matt Freeman
Terk's XM6 antenna gives you the strongest possible XM signal reception in your home, which helps maximize your enjoyment of all that great programming. Sometimes the indoor antennas that are included with dedicated home and plug-and-play satellite radios just don't get the job done but with the XM6, you'll enjoy every second of the programming you paid for.
You can mount this stout, all-weather antenna on your roof or an exterior wall, with the help of the supplied universal mounting bracket and hardware. Just add a cable (see the "Accessories" tab), and your setup is complete.
- outdoor XM home antenna
- universal mounting bracket
- includes all necessary installation hardware
- dimensions: 3-3/16"W x 4-3/4"H x 12-5/16"D (in bracket, with arm extended)
- warranty: 1 year
- Our 60-day money-back guarantee
What's in the Box:
- XM satellite outdoor home antenna (arm and mounting bracket attached)
- Threaded F-type to SMB adapter
- Weather boot
- 2 Mounting brackets
- 2 U-bolts
- 4 Nuts
- 4 Star washers
- Four 1" Self-tapping screws
- Installation Manual
Terk XM6 Reviews
Average Customer Review(s):
Thanks for submitting your review
Overview: The TERK XM6 is the perfect high-performance antenna for your XM home receiver or Plug & Play system. The XM6 outdoor satellite radio antenna is a low-profile, high-performance antenna designed specifically for XM Satellite Radio reception. The XM6 has a universal mounting bracket that can be installed to a wall, roof, or mast (including a satellite dish mast). The antenna itself has a threaded F-type coaxial connector designed for use with a standard RG-6 coax cable (not included). The included F-type to SMB adapter plugs into the XM tuner. Terk recommends not exceeding 100' cable length without a line amplifier.
System Requirements: In addition to this antenna, you must have an XM tuner and subscription to XM Satellite Radio to receive XM programming.
Compatibility Note: The XM6 is compatible with the XM Direct 2 Home Tuner, which is used with XM Ready home receivers. The XM6 plugs directly into the XM Direct 2 Home Tuner using the supplied F-to-SMB adapter.
Antenna Element Housing:
- Width: 2.987"
- Height: 1.429" (plus the connected cable)
- Depth: 3.537"
- Width: 3.336"
- Height: 4.724"
- Depth: 2.077"
Extension From Mounting Surface
- Maximum Arm Extension: 11.825"
- Minimum Arm Extension: 3.850"
- Frequency: 2332.5-2345 MHz
- Bandwidth: 12.5 MHz
- Impedance: 50 ohms
- Polarization: LHCP (Circular)
- Gain: 30 dB, typical
- Noise Figure: 1 dB, typical
- Current Drain: 70 mA, maximum
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.
3 questions already asked
You can run a RG6Q coaxial cable and terminate it with F-Type connectors. Make sure that you get the amps/booster otherwise you might run into a signal loss issue. [ Bryan May 10, 2016 ]
Terk is the mfg. [ CROSSCOM Apr 06, 2015 ]
If you purchased the product from Crutchfield, feel free to contact our Tech Support team. They can help you troubleshoot the set-up. Our toll-free Tech Support number is printed on your invoice, and is also available under the "My Orders" tab in the "My Account" section of our website. If you did not purchase the unit from Crutchfield, then you may want to contact the manufacturer. You can also post your question in our forums: http://community.crutchfield.com. Or try our online support center: http://crutchfield.custhelp.com/app/answers/list/kw/. [ Jeff Dec 21, 2013 ] Staff