Powered bookshelf speakers with Bluetooth® (White)
Our take on the Audioengine HD3 by Crutchfield's Eric Angevine
Convenient wireless desktop speakers
Sometimes you work at your desk. Sometimes you prefer the couch. No matter where you are in the room, you want to be able to stream music, and that's what this pair of Audioengine HD3 speakers excels at.
These speakers don't take up much space, and they use Bluetooth with aptX® technology to connect to your mobile device from up to 100 feet away, so you can sit just about anywhere in the room and still listen to high-quality streaming tunes.
If you need to make a wired connection, they've got you covered there, too. Plug in your gear via micro USB, 3.5mm minijack, or stereo RCA (perfect for connecting a turntable with a built-in phono preamp) and let everyone in the room hear your favorite tracks. When it's quiet time, use the headphone jack on the front of the left speaker to jam in your own little world.
My hands-on experience with the HD3s
Audioengine HD3 speakers are compact and versatile, and they sound great. Perfect for work and play in a desktop environment.
I live in a two-bedroom apartment, and Audioengine HD3 speakers are a good choice for my living space. I know this, because I got a chance to try out a pair recently.
At first, I used them as part of a turntable setup. The RCA inputs on the back of the left speaker made it easy to hook everything up. I dug into the record crates and veered from jazz ballads to raucous garage punk — dual built-in 15-watt amplifiers let me revel in accurate sound without inviting a noise complaint from the neighbors.
My teenaged son is very into PC gaming, so after my week of nostalgic vinyl listening, I decided to connect the HD3 to the desktop computer in his room. During the daytime, he was able to enjoy the dialogue and sound effects out loud, then when I declared grown-up quiet time at night, he plugged in headphones and we were both happy.
When my son heads off to college, I'd like to send a pair of these speakers with him. They're compact enough to fit just about anywhere. They can accommodate an analog connection to a cable or streaming box to enhance TV and movie viewing. The convenient Bluetooth antenna will make it easy to stream music for studying (or, let's face it, partying). There's a USB connection for his computer, and an aux input for his smartphone. These speakers will be a dorm room slam dunk for the most important person in my life.
- powered bookshelf stereo speakers
- Bluetooth with aptX audio coding for greater sonic detail with compatible devices
- range: up to 100 feet
- two 15-watt RMS amplifiers built into left speaker
- frequency response: 65-22,000 Hz (±1.5dB)
- each speaker features:
- one 3/4" silk dome tweeter
- one 2-3/4" Kevlar mid/woofer
- front-mounted volume control on left speaker
- built-in high-performance AKM AK4396A digital-to-analog converter
- ultra-rigid MDF cabinets reduce vibration and eliminate unwanted resonance
- furniture grade finish
- detachable magnetic grilles
- requires AC power (AC adapter included)
Inputs and Outputs:
- front headphone output
- rear micro USB input for PC or Mac®
- rear stereo minijack input
- rear RCA stereo input
- RCA stereo line output
Dimensions and Warranty:
- 4-1/4"W x 7-3/16"H x 7-1/4"D (each)
- weight: 4 lbs. (left powered speaker)
- weight: 3.4 lbs. (right passive speaker)
- warranty: 3 years
- Our 60-day money-back guarantee
What's in the Box:
- Powered speaker
- Passive speaker
- 2 Grilles (pre-installed)
- AC power supply (attached 6' DC cord)
- 6' AC power cord
- Bluetooth antenna
- 5' microUSB-to-USB cable
- 6.5' Speaker cable (banana connectors on each end)
- 5' Stereo minijack cable
- 2 Microfiber speaker bags
- MIcrofiber cable bag
- Quickstart Guide
- Product Line Brochure
I was looking for small speakers for a small room and these are amazing. Great build quality and they project an fantastic soundstage. The lows are ok. If you need more base, then I recommend a sub but I'm happy with them without a sub.
david, St Petersburg, FL
Audioengine HD3 Reviews
Average Customer Review(s):
Thanks for submitting your review
Features and Specs
|Pieces in System||2|
|Tweeter Size (inches)||0-3/4|
|Midrange size (inches)||N/A|
|Woofer size (inches)||2-3/4|
|Power Output (Watts)||30W|
|Frequency Response||65-22k Hz|
|Parts Warranty||3 Years|
|Labor Warranty||3 Years|
Audioengine HD3 Powered Speakers: The Audioengine's HD3's speaker cabinets, drivers, innovative bass port design, amplifier, and passive crossover network are critically tuned together, providing a more efficient system requiring less power than passive speakers & external amplifiers. The HD3 is not a "box-built" system with off-the-shelf parts, but includes custom-designed components constructed to Audioengine's specifications for high quality, high performance sound.
Two-Way Driver Design: The Audioengine HD3 employs a two-way driver design. Each speaker is outfitted with a 0.75" silk dome tweeter and a 2.75" kevlar cone woofer for a wide stereo soundstage.
- Silk Dome Tweeter: The HD3 uses an audiophile-quality, ferrofluid-cooled silk dome tweeter with a neodymium magnet. Silk tweeters hold up well under high power and the edge-driven design gives very smooth response.
- Kevlar-Woven Woofer: The woofer used is a Kevlar woven glass aramid composite with rubber surround. Kevlar is obviously very strong, which means the woofer retains its shape when being driven at high levels.
Built-In Amplifier: The amplifier in the Audioengine HD3 is located in the left speaker and are a conservatively-rated class A/B analog monoblock design. This is a more traditional speaker/amplifier configuration which provides excellent quality audio and greater flexibility. All circuit boards for the power and preamp sections are vertically mounted for maximum mechanical shock protection. The built-in power amplifier saves space & eliminates the need to connect Audioengine HD3 to a stereo receiver or external power amp.
Note: The included 6.5' speaker wire connects from the left speaker's binding-post terminals to the right speaker's binding post terminals to power the right speaker.
Hand-Built Cabinets: The Audioengine HD3's speaker cabinets are hand-built with furniture-grade finishes. The HD3 cabinets are available in several handsome finishes, including walnut and cherry veneers as well as satin black and white paint; offering a wide choice for complementing room furnishings. Also included are detachable grills that add further aesthetic advantages as they are firmly held in place with hidden neodymium magnets for a clean look.
Front-Slot Port: One of the reasons the Audioengine HD3 has such great bass response for a compact speaker is its slot-ported cabinet. Each cabinet features a rear-firing slot-port that has been specifically tuned for accurate bass down to 65Hz. The result is low end with minimal audible air turbulence, so you can use the Audioengine HD3 speakers with or without a separate subwoofer.
24-bit Upsampling DAC: The HD3's built-in Bluetooth receiver and USB input both utilize the AKM AK4396A DAC, widely known for its low-noise and high-fidelity. The AK4396A is used as an upsampling DAC and will pad all bit depths to 24-bits, achieving a higher signal-to-noise ratio and lower noise floor. Due to the high signal-to-noise specs of the AK4396A, the fact that digital signal is upsampled to 24-bits, as well as the added benefit of onboard triple redundancy power source conversion and filtering, the HD3 Bluetooth implementation presents impressive low noise and low distortion characteristics with a noticeable improvement over many other Bluetooth devices.
Bluetooth Music Streaming The Audioengine HD3 incorporates built-in Bluetooth (version 4.0) for wireless music streaming of stored music and music apps on your Bluetooth-enabled Apple iPod/iPhone/iPad, Android smartphone/tablet, Windows PC/Phone, Mac computer/laptop, and more to the powered speaker system. You will continue to control your music and view song/artist information from your Bluetooth-enabled device.
- SBC, AAC, & aptX Codecs: The HD3 powered speakers feature aptX coding (for Android) which is an advanced Bluetooth audio codec with "CD-quality" like sound. And even if your phone or tablet doesn't have aptX, the HD3 Bluetooth solution is backwards-compatible with SBC and AAC (for iPhone) codecs, so you can wirelessly stream music from any Bluetooth-enabled device and still enjoy all your music.
- 100' Wireless Range: Most Bluetooth products have very limited range (only up to 30'), typically within just one room. But with careful signal management circuitry and antenna tuning, the HD3 offers a superior solution that has up to 3x the range (up to 100') of standard Bluetooth for multiroom use, with no degradation in audio quality.
Note: Due to the differences in Bluetooth technology, some Bluetooth enabled devices may be incompatible, function improperly, or may not support all features when used with the Audioengine HD3.
microUSB Input: The Audioengine HD3 is fitted with a microUSB input that can be used to playback music files from your Windows PC or Mac computer (no separate USB driver necessary). Simply use the included microUSB-to-USB cable to connect the HD3 to a free USB port on your computer. The microUSB input bypasses your computer's built-in low-quality DAC and utilizes the HD'3 24-bit upsampling DAC for a high-end listening experience. The Audioengine HD3's microUSB port supports music files up to 24-bit/44.1kHz or 48kHz.
Audiophile-Quality Headphone Amp: The Audioengine HD3 features an audiophile-quality, dedicated headphone amplifier with front-panel headphone output. The HD3's high-performance headphone amplifier is based on the OPA2134 low-noise opamp. This amp is able to provide low-impedance, high-fidelity audio and a 2-volt output which easily drives a wide range of headphones
Dual Aux Inputs: The HD3 is equipped with two analog Aux inputs. There is a stereo minijack (3.5mm) input and a stereo RCA input for connecting analog audio devices.
Variable Audio Output: The Audioengine HD3 includes a variable stereo preamp audio output so you can connect a powered subwoofer (such as the Audioengine S8; sold separately), other Audioengine powered speakers, or an Audioengine wireless adapter (772W3; sold separately) to daisy-chaining music to other systems around the house. This output is variable (adjustable) so the volume level can be controlled from the HD3.
Front-Panel Rotary Knob: The HD3's front-panel rotary knob allows you to turn the speaker system on or off, as well as adjust the volume level up or down.
Power Requirements: The Audioengine HD3's left speaker plugs into an AC power outlet using the included AC power adapter and AC power cord.
Break-in Period: The speaker will sound great out of the box & will get better over time. No need to do anything else, but listen to them. Do give them at least 30-50 hours of break-in time before doing any critical listening.
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.
Why did you buy this?
looking to update our sound system [ Joanne Dec 16, 2017 ]
Close choice between these and the A5+. However, the primary use was as desktop computer speakers in a relatively small room. After much research, these appeared to have a better near-field listening experience while the A5+ might be too overwhelming at close distances (less than 3 feet). [ R Aug 16, 2017 ]
Very favorable online reviews, Audioengine's reputation for quality, and look at these speakers... absolutely gorgeous design. [ DT Feb 16, 2017 ]
The cherry finish reminds me of Thomas Jefferson! I highly recommmend a daylong visit to Monticello next spring when the vernal sun drenches the pastoral setting surrounding his natural contemplative residence. [ John Dec 01, 2016 ]
Wanting a high end desktop speaker and after research and reviews from multiple sites, these seemed to be a perfect match. [ Stuart May 31, 2018 ]
There is nothing stylish that I can place on my desk that plays quality sound. I plan on adding the subwoofer later on. [ Leonardo Oct 07, 2017 ]
I trust the Crutchfield name and their advisors when it comes to their products. There are so many different sites out there but they have been around for so long and so well established. You just can trust them. [ JEFFRY Jul 16, 2017 ]
I use an Audioengine B1 to stream ripped CDs from Apple iPhone, iPod or MacBook to an integrated amp and the B1 works flawlessly and has a fantastic range. These speakers use the same electronics as the B1 and I'll stream to them in the bedroom, basement, back porch or wherever I choose to set them up. A lot easier than running wires all over from the amp. They won't sound like my Klipsch Fortes but then I can't simply pick those up and do a quick move. [ John F. Mar 09, 2017 ]
Best speakers, right color and price reduction due to open box. [ Faraz Jan 26, 2017 ]
I picked the Audioengine HD3 Powered Speakers for their high quality sound, outstanding construction, size and connection options (including bluetooth). [ HENRY Jan 09, 2017 ]
1 question already asked
there is no provision for adding a subwoofer. The only way I could see to accomplish that would to be to add a passive crossover upstream of the input and divert the Low frequency stream to a separate subwoofer. That would be a faie amount of work. [ THOMAS A Mar 14, 2017 ]
Frequently Compared With
Powered bookshelf speakers with Bluetooth®
Powered desktop stereo speaker system
Klipsch Reference R-15PM
Powered bookshelf speakers with Bluetooth® and built-in phono preamp
Premium powered bookshelf speakers