Wall- and ceiling-mount speaker bracket (White)
- mounts a compact speaker to the wall or ceiling
- solid steel arm included for ceiling mounting
- supports speakers up to 10 pounds
- rotates 360°
- attaches to a speaker's keyhole slot or threaded inserts
- compatible with speakers that have a keyhole slot or one or two threaded inserts
- dual point mounting requires center-to-center hole spacing between 2-1/4" and 2-3/4"
- sturdy metal construction
- mounting hardware included
- 1-13/16"W x 5-9/16"H x 3-1/2"D
- warranty: 5 years
- Our 60-day money-back guarantee
What's in the Box:
- 3-piece mounting bracket (ceiling-wall mount / short extension arm / single-point adapter) 2 Covers (installed on three-piece mounting bracket)
- Long extension arm
- Dual-point adapter
- M5 Keyhole adapter
- 1/4"-20 x 1.75" bolt
- 1/4"-20 x 1" bolt
- M6 x 25mm bolt
- M5 x 25mm bolt
- Two M6 x 12mm bolts
- Two M5 x 12mm bolts
- Two 1/4"-20 x 0.47" bolts
- 2 Wood-screws
- 2 Large flat washers
- Small flat washer
- Split-lock washer
- Installation Instructions
Made of metal and therefore stronger than plastic brackets. Multiple adjustments . My experience indicates the maximum weight for ceiling mount speakers should be 6 pounds.
Gerald N, Gold Canyon, AZ
Pinpoint AM26 Reviews
Average Customer Review(s):
Thanks for submitting your review
Wall/Ceiling Mount Bracket: The Pinpoint AM26 universal speaker wall/ceiling mount bracket has been designed for maximum flexibility and compatibility for today's home theater speakers. Sold as a single mount, the AM26 offers multiple mounting options for traditional speaker mounting applications for wall & ceiling locations. Made from steel and aluminum, the AM26 will support speakers up to 10 pounds and includes all hardware to mount nearly all home theater speakers on the market today including Single, Dual and Keyhole mounting points. The AM26 incorporates a ball joint system allowing for endless angles for fine tuning the speaker's sound and simple two-piece design allowing for quick mounting. Included with the AM26 is a solid steel arm that can be used to convert from wall mounting to ceiling mounting configuration for even more versatility and installation options.
Note: The AM26 is sold individually as a single speaker bracket; not in pairs. The AM26 is available in the following finishes - Black and White.
Precise Adjustment: Once your speaker is mounted, the AM26 allows you to rotate your speaker 360-degrees and pivot the speaker 90-degrees for precise positioning of the speaker in your home theater system. The AM26 comes supplied with all the necessary hardware to mount your speaker to the bracket and the bracket to your wall or ceiling. The speaker is placed 3.4375" from the wall when fully extended or 5.5625" from the ceiling when fully extended.
Speaker Mounts: The bracket works with the following types of speakers mounts.
- Single Threaded Insert: If the speaker has a single threaded insert, one of the supplied long screws (M5 x 25mm, M6 x 25mm, 1/4"-20 x 1", or 1/4"-20 x 1.75") can be used to attach the speaker to the bracket using the single point adapter.
- Dual Threaded Inserts: If the speaker has dual threaded inserts, you must first attach the dual point adapter plate to the bracket, then use the shorter screw pairs (M5 x 12mm, M6 x 12mm, or 1/4"-20 x 0.47") to attach the speaker to the bracket. Screw spacing for the dual point adapter plate is 2" to 2.75"
- Keyhole Slot: If the speaker has a keyhole slot, you must first loosely attach the M5 threaded screw-cap to the M5 x 12mm screw through the single point adapter. The head of the screw is then inserted into the keyhole slot and tightened to hold the speaker firmly.
Wall or Ceiling Mounting: The speaker bracket's metal mounting plate is first mounted to the wall or ceiling. There are two mounting holes with a screw spacing of 2" to 2.75" for the supplied wood screws, plus a raised lip for routing the speaker wire through the wall (however, the speaker wire is not concealed within the bracket and will be visible). Once the metal mounting plate is secured to the wall, the cover plates snap over the metal mounting plate for a clean and professional look.
- Overall Wall-Mount Bracket Dimensions: 2.0625" (w) x 3.6875" (h) x 3.4375" (d)
- Overall Ceiling-Mount Bracket Dimensions: 2.0625" (w) x 3.6875" (h) x 5.5625" (d)
Mounting Requirement: Wood stud installation that can support at least 2x the total weight of the speaker is recommended. If your installation requires the use of drywall anchors (not included), please select quality anchors that best fits the mounting needs of the drywall and can support 3x the weight of the speaker.
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.
Why did you buy this?
Recommended by Crutchfield advisor Harley! [ C May 27, 2018 ]
David the sales rep suggested it. [ David May 11, 2018 ]
For mount a wall speaker [ Juan Feb 08, 2018 ]
Recommended by Bryce my Crutchfield Advisor [ Ryan Dec 19, 2017 ]
It's all you had in stock [ Jamar Dec 01, 2017 ]
The AM24 is no longer available. So I am hoping these will work. [ Stacy Dec 01, 2017 ]
Fit existing speakers and are metal, not plastic. [ Daniel Aug 13, 2017 ]
I liked that the mounting screws are hidden. Appears to be a decent product. [ JEFFREY M Apr 04, 2017 ]
I have shopped around for some good sturdy brkts. and this seems to fit the bill. [ RICHARD Feb 27, 2017 ]
To mount my 2 new speakers to the wall.... [ Michael H. Feb 19, 2017 ]
Crown molding is white [ Chad Sep 13, 2018 ]
multiple bolt sizes provided [ Matthew Mar 17, 2018 ]
Thanks for recommendation from Crutchfield employee, David [ Estelle Feb 01, 2018 ]
2 questions already asked
Yes. You will find the Pinpoint AM26 listed as a compatible bracket by clicking the "accessories" tab on the Martin Logan Motion 4's main webpage: http://www.crutchfield.com/p_839MO4GB/item.html I hope that helps. My Bio: https://www.crutchfield.com/Support/Bio.aspx?bio=5 [ Ryan May 05, 2017 ] Staff
No [ Clifford L Sep 06, 2018 ]
It's not intended to. It is recommended that it is mounted to a stud. The mount is metal and then add the weight of your speaker. Plus the mounting screws are more like lag bolts than screws for an outlet box. Could you alter it to mount it to the box, likely. But you'll want to consider the weight of your mount and speakers so you select the right hardware to make sure nothing comes crashing down. [ Wendy Sep 06, 2018 ]