Contact us
Close contact box
Connect ID #
899 118 857 4
Connect ID #
899 118 857 4
Don't wait on hold. We'll call you back when it's your turn to talk with the next available .
Please enter your name  
Please enter your phone number  
Please enter a message  

Calls may be recorded for training and quality control purposes.

We are located in Virginia USA.

Thank you. We will be calling you .
We're sorry. We have encountered a problem.

Gram H's 1998 Dodge Dakota

Better sound brings new life to this Dakota

1998 dodge dakota door speakers

In brief: Gram's Dodge Dakota might be an oldie, but it's definitely a goodie. And it's even better now, thanks to the very tidy work he did to upgrade the audio system.

Use our vehicle selector to find the gear that will fit your vehicle. 

Items installed:


  • JVC KD-T925BTS CD receiver
  • Metra 70-1817 wiring harness adapter

Speakers and subwoofer:

  • Kicker 47KSS6704 component speakers (front doors)
  • Polk Audio DB5252 component speakers (rear pillars)
  • XTC 6 3/4 Slim Line speaker baffles (front doors)
  • Kicker 46TL7T82 dual 4-ohm voice coil subwoofer and truck box

Amplifiers and wiring: 

  • Kicker 46CXA400.1T mono Class D amp
  • Two JVC KS-AX5102 2-channel amplifiers
  • Crutchfield 12' 4-channel patch cord
  • EFX 9' marine patch cable
  • Stinger SSVLBTN battery terminal
  • Stinger SFB1MaxPT inline fuse x2
  • NVX 4AWG power wire
1998 dodge dakota receiver location

The JVC KD-T925BTS CD receiver fits neatly into the Dakota's dash. Nifty mic installation, too!

Installation description

Removed the door panels, C-pillar trim, seat belts, seats, dash bezel and carpet. Installed 6-3/4" component speakers, drilled holes and installed tweeters and crossovers in the front doors. Drilled holes and installed tweeters, 5-1/4" Polk Audio component speakers in the C-pillars. Mounted crossovers and subwoofer amplifier on the rear wall. Ran the power, ground, and audio wires under the carpet. Installed amps under both front seats. Soldered all the wiring connections. No garage...

1998 dodge dakota rear wall

The rear wall installation looks as good as it sounds


Why did you decide to upgrade your A/V system?

After 469,000 miles, it was time to replace the truck's factory speakers. Not to mention that the previous owner had installed a Sony head unit without proper grounding. The stereo couldn't compete with road and engine noise.

Stereo wiring harness professionally wrapped

What's the first thing you show people about your installation?

The dash harness. Looks better than factory.

Why did you choose these products?

I've always trusted Kicker, love the Solo-Barics. Wanted to try Polk Audio. JVC still makes a CD player, and that's a huge win for me.

1998 dodge dakota pillar tweeter installation

According to Gram, the C-pillars weren't easy to deal with, but the results made the work worthwhile

What was the most difficult part of the installation?

The removal and replacement of the C-pillar trim.

What plans, if any, do you have for future upgrades?

Hopefully this is sufficient for a single-cab truck. I installed the head unit and single amp for the Kickers up front. The next day, I tore it all apart again to add the Polks and the sub.


You'd be smiling too, if you'd just completed an installation like this!

Nice work, Gram! This is one of the cleanest and most professional-looking installations we've seen in a long time. We know it has transformed your drive time to more of a fun time. That old truck must have some good stories to tell, and now you can give them the soundtrack they deserve. 

Let's get started!

Ready to shop? Use our vehicle selector to find the gear that will fit your car or truck. If you have questions of your own, give us a shout via phone, chat, or email

Vehicles in the Custom Car Showroom are submitted by customers and fans, and edited by Crutchfield writing staff. You can find more of these articles on the Showroom main page.

Looking for
car stereos?

Car Stereos Shop our selection

Find what Fits your vehicle


Checking fit...

Compare the sound