Must-have for Running Wires Through Dash

I could not have ran my parking brake and reverse wires through my dash and completed my install without this.

Have questions for
?

Crutchfield response on

Pro.Fit Wire Worm

The worm was excellent for snaking wires through tight spaces in my Sonata. It made getting the wires through tight spots and past some foam insulation a breeze. Used tape to help keep the wire on the end and then pushed it through. Well worth the money for my install job

Have questions for
?

Crutchfield response on

There are home made options that work better.

This was an okay product, but to be honest I get a lot more versatility from an open coat hanger that I wrapped the ends in Tessa Tape.

Have questions for
?

Crutchfield response on

smart toolbox addition.

Ended up not needing it for what I thought I would but still had to use it for an install. People may say "just use a coat hanger", please dont! the risk of damaging a different wire, scuffing and scratching things or just straight out ripping rubber wire boots is to high with a wire coat hanger, this is much safer and easier then rewiring an entire door panel due to harness damage.

Have questions for
?

Crutchfield response on

Useful

Worked well.

Have questions for
?

Crutchfield response on

Use this

Works well. Stout. Door jam and firewall "life saver" Just buy it, even tho it's overpriced.

Have questions for
?

Crutchfield response on

Works But Should Be Cheaper

It does the job without scratching anything up. But it comes coiled and is hard to straighten out. And it is priced way higher than it needs to be - I bet the profit margin on this is about 95%. Still, worth it if you have to fish wires through a complicated dashboard.

Have questions for
?

Crutchfield response on

very helpful

Very helpful, glad I had it for the install, certainly better then a coat hanger on the door boot

Have questions for
?

Crutchfield response on

Pro.Fit Wire Worm

Made the install much easier.

Have questions for
?

Crutchfield response on

Just what I needed.

Just what I need for working on car stereo installations.

Have questions for
?

Crutchfield response on

Wire Worm

This is just what I needed to get wires under carpets and through bulkheads!

Have questions for
?

Crutchfield response on

Pro.Fit Wire Worm

this helps greatly when trying to run wires through a Dash or from the cabin into a door

Have questions for
?

Crutchfield response on

Pro.Fit Wire Worm

Worked great to help run my rca's to the front

Have questions for
?

Crutchfield response on

Useful

Works well for short runs. The flat design helps it stay pointed in the right direction.

Have questions for
?

Crutchfield response on

Versatile

Used it to poke through a fire wall grommet recently, made the ordeal so much easier than a zip tie. I'm gonna use this for a bunch of stuff.

Have questions for
?

Crutchfield response on

Great

Great for routing wires through places. This was a crucial part of my install!

Have questions for
?

Crutchfield response on

great tool

Great tool! Used it to feed wire through car door boot into dash for new speakers. Cuts through the mess of wires with ease. Must have tool!!

Have questions for
?

Crutchfield response on

Pro.Fit Wire Worm

Worth every penny

Have questions for
?

Crutchfield response on

Should of gotten one sooner !!!

This thing came in so handy when it came to running wire for some component speakers I installed a few weeks ago. Had to run wire from tweeters in "A" pillar to front door on both sides to crossovers. And this thing made it sooo dam easy !!! I mean it's so simple yet it worked wonders on my project ! I would get one if you have to run any kind of wire in your car, it's long enough for most applications.

Have questions for
?

Crutchfield response on

Indispensable Tool

Indispensable tool. I tried running wires with a coat hanger - this tool made my DIY stereo/backup camera install so much easier and saved me tons of frustration. Well worth the money spent, even if it ends up being used on just one job.

Have questions for
?

Crutchfield response on

Pro.Fit Wire Worm

Ok product. However the shipping sucks. It comes spiraled up and it keeps that memory / set. Better off with a big zip tie.

Have questions for
?

Crutchfield response on

Pro.Fit Wire Worm

Does the job

Have questions for
?

Crutchfield response on

Don't regreat yourr life choice.

Worked perfectly to snake wires from the trunk to my cabin. I would have regretted not getting this.

Have questions for
?

Crutchfield response on

Pro.Fit Wire Worm

Made install muchveasier

Have questions for
?

Crutchfield response on

Pro.Fit Wire Worm

Without this tool it would be a pain to run wires.

Have questions for
?

Crutchfield response on

Good tool - bought it on a whim and glad i did

I bought this on a whim, throwing it in with some other items for my installation. I didn't really plan on using it much, just thought "oh, that would be nice to have". I have used it heavily since on projects in car and home. Very useful tool, and durable. It has done everything I wanted, passing through difficult body to door boots, in-dash crevices, and cabin trim panels. The balance of stiffness to make it through tough places, but flexibility to navigate tight turns has been perfect for my use so far. Glad I have it - the only things I have wished would improve are: increase the length of the tool 50%, configure both ends to be the same (if you decide to change your pull direction, you have to remove the tool, reorient and reinstall). Not a bad tool without these, just my opinion on what would take it to the next level

Have questions for
?

Crutchfield response on

Pro.Fit Wire Worm

Very helpful to pull camera wires through the mirrors and the firewall of my truck

Have questions for
?

Crutchfield response on

Also useful for installing seat covers

I first used it for fishing the wire for a backup camera. But I got much more use out of it while installing seat covers, fishing the elastic straps behind and under seats. I didn't even have to remove the back seat! I cut a 1/2" long slot at one end for the elastic to fit through.

Have questions for
?

Crutchfield response on

Pro.Fit Wire Worm

Made snaking wires so much easier.

Have questions for
?

Crutchfield response on

Pro.Fit Wire Worm

Spends a lot of time curling backup

Have questions for
?

Crutchfield response on

Worked Perfectly

Used to pull speaker wire through door boots and it worked great. With the way my door boots were all pretty much at 90 degree angles, I don't know how I would've gotten my speaker wire into my doors without it.

Have questions for
?

Crutchfield response on

Makes Life Easier

Use to run new wire in a 2015 Camry. I suggest pulling both the door side and the chassis side of the boot out. This allows easier manipulation. The worm moves right through and around all the OEM wiring (door locks, window motor and entry light) easily. There are other DIY "tools" (zip ties, hangers, ice-maker connection tubing that I've used before) and I will never go back to after using this.

Have questions for
?

Crutchfield response on

Pro.Fit Wire Worm

Just a long zip tie. Would not make it though the door boot to run the speaker wires. Not worth the money

Have questions for
?

Crutchfield response on

Coil Memory Fix

This product worked well. How ever it is really just a long flat cable tie with a hole in it. I get what the other reviewers meant about being coiled up and unable to use. My sis was to tape it flat along banister railings and use a heat gun on it. This removed all of the memory so it would be straight instead of coiled. You could also use / tape it to a metal table or rack if it were long enough. Anyway the tool does work well to fish wires up under the dash or through floor panels. Hope this shelfful,

Have questions for
?

Crutchfield response on

a little pricey, but effective

I only used this to snake my 1/0 power cable from the engine bay through the factory grommet into the cabin. And it worked great

Have questions for
?

Crutchfield response on

Pro.Fit Wire Worm

didnt have any use for this - it kept coiling up and did not help at all

Have questions for
?

Crutchfield response on

Pro.Fit Wire Worm

Works well

Have questions for
?

Crutchfield response on

Pass on this...

It was basically useless all it wanted to do was cool back up into a lottle spool every time I tried to use it. I was unable to run wire with it anywhere in the dash, under carpet...

Have questions for
?

Crutchfield response on

Good for ...

I thought this might be helpful for installing a back-up camera, but I really was unable to use it. Due to its curvature, no matter how much I tried to straighten it, I couldn't get it to go where I needed it to go. So, for me, it was useless.

Have questions for
?

Crutchfield response on

Pro.Fit Wire Worm

It helped guide wires behind the dash without issues.

Have questions for
?

Crutchfield response on

You need this.

This tool is great. Fished all new lines into doors with ease.

Have questions for
?

Crutchfield response on

Pro.Fit Wire Worm

Helpful

Have questions for
?

Crutchfield response on

Wire worm

Works great.. got wires around hatch thru hatch door. Couldn't have done it without it.

Have questions for
?

Crutchfield response on

Pro.Fit Wire Worm

Made it going from the trunk to the cabin a snap

Have questions for
?

Crutchfield response on

Pro.Fit Wire Worm

My radio came with a wired mic and the Crutchfield rep suggested I buy this. Boy, did it make the job of threading that thing under the dash easier! Simple, useful tool that's actually worth the price, IMO.

Have questions for
?

Crutchfield response on

Indispensible for installations

I've had mine for over ten years and glad Crutchfield still sells it; I don't know how I would have been able to route wires through kick panels, up and down through under-dash parts to keep wiring away from steering linkages and so forth, basically to get wiring exactly where I want it. Stiffer than a cable tie, and the bend that is there when you open the package and can be massaged out when necessary, although it can be frustrating at times, can work to your advantage to get the tip of the "worm" to thread through exactly the spot you want it. I'll probably get a second one soon, there isn't anything else on the market that I've seen that could work this well.

Have questions for
?

Crutchfield response on

Pro.Fit Wire Worm

Not what I expected. Poor photos on site. You think it's much more until you receive it

Have questions for
?

Crutchfield response on

Pro.Fit Wire Worm

This is a great tool to help get wires through small spaces. I would definitely recommend to anyone who is doing a self install to make sure you have one of these.

Have questions for
?

Crutchfield response on

Wire worm

This works well. Definitely better than a coat hanger.

Have questions for
?

Crutchfield response on

A handy tool!

A simple design and implementation but very useful in working cables through a dashboard. Well worth the purchase price.

Have questions for
?

Crutchfield response on

Does its job

Works well for running wires in a car. I highly recommend - it will lower your stress level and make life easier on you. Recommend.

Have questions for
?

Crutchfield response on

It does what it's supposed to

This item works pretty much exactly as you'd expect it to. It's not inexpensive for what it is, but it's made out of a pretty sturdy material and seems like it will stand up to the test of time.

Have questions for
?

Crutchfield response on

Great Tool

Great tool. It was what I needed to run my camera wiring to the rear of my car.

Have questions for
?

Crutchfield response on

Handy little tool.

Helpful when you're running wires in tight places.

Have questions for
?

Crutchfield response on

Just get one!

A must have installation tool.

Have questions for
?

Crutchfield response on

Nice little "fish tape" for cars!

Worked great for me. Couldn't find anything comparable for the price. Used on 3 jobs so far, under carpeting and inside doors for wire runs. Just take your time and have some patience pushing it through and it will last a long time. I had to help guide it through the rubber "accordion" conduit in the front doors with my hands, but no big deal. It does come out of the package with a curve, but I found it plenty flexible and just rolled it up the opposite direction and placed it back in it's bag for a few hours.

Have questions for
?

Crutchfield response on

Worked perfect

Well it saved my hand, knuckles and installing time. No pulling seats too run rca, speaker and remote wires. Well worth the money!! One suggestion is too remove it from package and lay it flat on hard surface in the sun if possible. place a brick on each end overnight. Nice and straight.

Have questions for
?

Crutchfield response on

Pro.Fit Wire Worm

This thing is great for snaking wires through a vehicle. I wish I had found this sooner!

Have questions for
?

Crutchfield response on

Invaluable in installing my system

This thing was invaluable in installing my system. I knew I'd use it to fish the power wire through my firewall, but I found a number of other uses that made various tasks so much easier when running speaker wire and RCA's. The only drawback is that mind does NOT want to straighten itself out. It has a constant curve to it, which means I have to be strategic when using.

Have questions for
?

Crutchfield response on

Definitely came in handy

I picked this up through the suggestion of my salesman and am really glad I did. I was dreading running the 8 gauge power wire through the firewall, and thought this would make it easier. As it turned out, I didn't need it to run the power wire through the firewall on my '07 Mustang. BUT, I did find numerous uses for it in running other wires/cables throughout my Pony. I can't tell you how much this little piece of plastic helped me. Tip.....when it came, it was wrapped up pretty tight, and as others have said, it didn't want to straighten out. Fortunately I received this in the summer and it was 93 degrees outside, so I unrolled it, placed in the driveway directly in the sun, and set a gallon water jug on both ends. I found it straightened out the best by having the "curve" aimed up, and then set the water jugs on both ends. After about an hour in the hot sun, it was just about perfectly straight. Actually, it had just a slight bend left that turned out to be advantageous when running wire. All in all, definitely a good purchase for ten bucks.

Have questions for
?

Crutchfield response on

Great for fishing wires through tight places.

Uncoil this device and stretch it out as soon as you receive it. If you do this, it will work just fine. Worked great for fishing the video cable from the backup camera to the head unit.

Have questions for
?

Crutchfield response on

Useful wiring tool

This was my first attempt at wiring something in my car, dual headrests, and this wire worm was great. I was able to get from the opening below the seats, to one near a seat bolt near the rear of the drivers seat, then under the center console to the passenger side seat. It was firm enough to nudge through the carpet and the curved shape helped me pull the wires up and out. On to the next project!

Have questions for
?

Crutchfield response on

Useless for my double din install on 2006 Ford Fivehundred

I honestly felt like this was useless for my double din installation. I could see it being more useful if you were going through the fire wall or rewiring speakers. The rep recommended it and put it in my quote during a chat conversation. I didn't really pay for it because I had received a discount on my order.

Have questions for
?

Crutchfield response on

Awesome

Easy to manipulate into your needed path. Keeps the wires in place just as they should to make it through.

Have questions for
?

Crutchfield response on

Pro.Fit Wire Worm

Works great but shipping cost way to high

Have questions for
?

Crutchfield response on

does the job but curl can be frustating

Did the job but comes curled in a tight circle and wants to stay that way. I tried to bend and curl it in the opposite direction several times and that helped about 50%. It will feed cable through tight, straight spaces but wants to bend in that same direction. It can get frustating at times...

Have questions for
?

Crutchfield response on

An excellent tool!

This works better than the bent metal coat hanger method of threading wires through a vehicle. The nylon is unlikely to scratch painted metal or plastic surfaces. This tool will last for several installations.

Have questions for
?

Crutchfield response on

Good Product - Good Price

This little tool was the difference between a pro looking job and the job not getting done. I used to cut up wire hangers to run wires through the car, but the Pro Fit Worm is more flexible and easier to work with. Also, continues to be useful getting the cables in place behind the entertainment center and computer. Can't go wrong with having this in your tool box.

Have questions for
?

Crutchfield response on

Owner

Product worked as directed. Pulled wire where you could not put your hands

Have questions for
?

Crutchfield response on

Wire Worm

I have used a lot of different things to fish wires but this works great for interior work.

Have questions for
?

Crutchfield response on

Pro.Fit Wire Worm

Worked as described

Have questions for
?

Crutchfield response on

Simple

Pretty strait forward item,, If you have to run wires behind the dash, up the windows panels--or in my case, run an emergency brake wire to the e brake this simple tool is a must have.

Have questions for
?

Crutchfield response on

Wire Worm

Comes tightly coiled and in order to make it useable I had to straighten it by recoiling it in the other direction and letting it sit for several days. It still had a small curve but I found that useful for hugging panels while feeding it through.

Have questions for
?

Crutchfield response on

Pro.Fit Wire Worm

The worm was an "after thought" order after i fully reviewed what was going to be involved in running new speaker wire for my component speakers in both the doors and the dash. This works infinitely better than any of the makeshift wire snakes i have made in the past.

Have questions for
?

Crutchfield response on

Buy this!

This works well and it is a must have if you are fishing wires through door jambs to re-wire speakers for a 4 channel amp

Have questions for
?

Crutchfield response on

Works

Worked as advertised

Have questions for
?

Crutchfield response on

Lifesaver

This is a fantastic tool. I couldn't have done the speaker wires in the doors of my truck without great destruction and a sloppy install without this tool.

Have questions for
?

Crutchfield response on

Not helpful

I would not recommend this tool. It comes coiled up and it remembers the shape making it difficult to fish through the car panels. I did manage to use it to fish wire through a short open distance behind the glove box, but that was all it was good for.

Have questions for
?

Crutchfield response on

Great little tool

Great little tool for running wires behind panels.

Have questions for
?

Crutchfield response on

Great Product

When I first took this out of the package, I thought it was going to be hard to use because it stays curled up. That actually makes it easier to use. Once I learned how to use it, it made my work a lot easier. Great product.

Have questions for
?

Crutchfield response on

Handy tool

Very useful for threading wires through your dash.

Have questions for
?

Crutchfield response on

Installation nightmare

This simple tool was a lifesaver. Person who had truck before me butchered the wiring to the point I did a clean new install with all new wires. This thing got through the door boots, through the dash, into the headliner (for my tweeters). I love this thing

Have questions for
?

Crutchfield response on

Helpful

This tool was very helpful when I was running the power cable from the battery to the inside of the vehicle.

Have questions for
?

Crutchfield response on

A fishing tape that catches the big ones

This beats a metal fishing tape hands down. Being plastic, it is unlikely to damage any wires or other components in dark places while you are pushing it through. It is flexible enough to bend through reasonable accesses yet rigid enough to push wires when pulling seems impractical. The hole in the center of the tape makes pulling or pushing wires mush easier and reduces snagging. At four feet in length, it is adequate for most automotive cable pulling activities.

Have questions for
?

Crutchfield response on

So-so

It's a pricey piece of plastic. It did come through in a few applications of my install but was still difficult. The hole notches at the ends were useful to run a bit of wiring through to secure it in place and run in tight spots. It's a bit wide for my uses and was a little too stiff for the areas I needed.

Have questions for
?

Crutchfield response on

Made it Much Easier

We really liked this. It made it so much easier the one or two times we needed it.

Have questions for
?

Crutchfield response on

Great to Have

This thing is great! It made my life easier running power cables, speaker wires, and rca cables through my car. It's going to stay in my family for generations to come.

Have questions for
?

Crutchfield response on

Good tool to have for installers

It worked great for me ..

Have questions for
?

Crutchfield response on

Get it

Made feeding the wires SO much easier.

Have questions for
?

Crutchfield response on

Pro.Fit Wire Worm

This is a nice heavy piece of nylon to fish wiring . Much better than a hanger or strapping tape or... I've used it for several projects now. Well worth the price

Have questions for
?

Crutchfield response on

Pro.Fit Wire Worm

Overpriced for a 3 foot piece of plastic. It did an ok job of helping me route wires.

Have questions for
?

Crutchfield response on

Worked well

Worked very well for running wires through boot on door; better than a wire hanger.

Have questions for
?

Crutchfield response on

Excellent Gear

A must have for most car stereo installations. Threads wires under carpet like a charm.

Have questions for
?

Crutchfield response on

waste of money.

Total waste of money.

Have questions for
?

Crutchfield response on

Pro.Fit Wire Worm

well worth it, had a similar item way back in the nineties , makes running wires a snap!

Have questions for
?

Crutchfield response on

garage door opener install

Did not need for satilite radio antena install, but needed to run wire from atic to mid wall opening for garage door opener install. Up in 120 plus degree atic in summer only not even 2 min and there was my wire worm. great product with many uses.

Have questions for
?

Crutchfield response on

Pro fit wire worm

Not really necessary. A coat hanger or old piece of wire could do the same thing. I had to cut it down some. I found it to be a little too wide.

Have questions for
?

Crutchfield response on

Pricey but good.

The Wire Worm tool worked perfectly. I would suggest you open the package, and let it "straighten out" overnight from the coiled up shape it is shipped in. But the tool did the trick. threaded my microphone wire through the dashboard easily. Only two stars because I paid this much for a $1 piece of plastic.

Have questions for
?

Crutchfield response on