About the Q-Forms Kick Panel Enclosures

What's in the box:
Q-Forms Kick Panel Enclosures owner's manual
If you need assistance accessing this owner's manual, please give us a call.- 2 Light Gray plastic Q-Forms
- 2 Self-tapping screws (Length=1-1/2")
- Two 1" plastic spacers
- Two 6 x 8-inch pieces of Polyfil
- Installation instructions
- Q-Forms "C-series" instruction sheet
Other info:
- MFR # QL-K1004C13
- Item # 044C100413
More details on the Q-Forms Kick Panel Enclosures

Product Research
Features
Product Overview: Q-Logic C-Series Q-Form custom kick panels are designed to hold a 2-way component speaker system consisting of a woofer up to 6-1/2" and a tweeter (up to 2" diameter). They are fabricated of durable ABS plastic, color matched to the factory interior colors, and directly replace the factory kick panels. The positioning and angle of the speakers provide optimum stereo imaging and staging.
No Grilles: Because no grilles are included with the Q-Forms, you must use the grilles supplied with the component system. In some cases, the grille could slightly overlap the mounting surface for the woofer. In this case the cutout can be made so any overlap occurs at the back bottom edge where it will not be visible.
Note: One of the included installation guides states that two Q-grilles are included. That is not the case for the C-series Q-Forms.
Compatibility: These Q-Forms are designed to fit select 1994-2004 Chevrolet S-10, Isuzu Hombre, and GMC S-15 and Sonoma pickups, Chevrolet S-10 Blazers, Oldsmobile Bravadas, and GMC Jimmys.
Note: Please enter your vehicle information to verify compatibility.
Factory Colors: These kick panels match the factory Light Gray interior trim.
Installation Notes
Installation Overview: You will need to cut out the mounting holes in the designated areas of the plastic Q-Form. A roll of foam tape is provided for sealing the woofer in the kick panel. The tweeter can be flush or surface mounted. Giving exact mounting depths is not possible, since it will depend to some extent on the space available behind the factory kick panel. (Q-Logic advertises 4" minimum.)
Important Modifications: Installation requires bending the parking brake pedal arm (with recommended crescent wrenches) so it is relocated about 1-1/2" to the right. You must also remove the computer module attached to the bulkhead behind the passenger-side kick panel and relocate it to a new position below the glovebox.
The Q-Forms Kick Panel Enclosures replaces these items:

Q-Forms Kick Panel Enclosures
- Install a 5-1/4" component speaker system in 1994-97 Chevrolet S10s, 1995-1997 GMC S15s, 1996-1997 Isuzu Hombres
Loading...
Loading accessories...
Customer Q&A
3 questions already asked
Loading...
Loading articles...