Features

Overview: The MB Quart MBQJK-28CRGB soundbar enclosure features two pre-installed 8" 2-way speakers mounted in a composite enclosure that's designed to install in the rear overhead location of select Jeep Wrangler JK vehicles. The speaker enclosure installs using the factory mounting location and hardware.

Compatibility: The MB Quart MBQJK-28CRGB is designed specifically for installation in 2007-2018 Jeep Wrangler JK vehicles.

Speakers: The MBQJK-28CRGB includes two pre-installed 8" speakers. Each 2-way speaker features a composite polypropylene woofer cone, with Butyl rubber surround, and a coaxially-mounted 1" titanium dome tweeter. The 4-ohm speakers are configured for stereo operation. Wiring into the enclosure consists of an 8' loomed harness that's terminated in a 4-pin Molex plug designed to connect directly into select MB Quart NA2-400.2 or NA2-400.2RC amplifiers (both sold separately). If connecting the speaker enclosure to another brand or model of amp, the 4-pin plug must be cut off and the wires directly spliced. The speakers have a frequency response of 25 Hz-22 kHz and a sensitivity of 92 dB.

RGB Lighting: The MB Quart overhead soundbar includes pre-installed RGB LED speaker grilles for illuminating each speaker cone. 8.5' bare-ended RGB wires on the input harness let you connect to a +12V power source and ground to select a static color for the RGB LEDs. You can also use an optional RGB LED controller (sold separately) for dynamic color options (see Accessories tab).

Power: The MBQJK-28CRGB can handle up to 70W RMS (140W peak) on each of the two input channels.

Grilles: The MBQJK-28CRGB includes a set of pre-installed black plastic spoke-style speaker grilles.

Dome Light: The MBQJK-28CRGB enclosure features a built-in mounting location for your factory rear dome light, along with wiring that plugs directly into the light on one end and the Jeep factory wiring on the other end.