About the Chief Fusion LCM1US Large Flat Panel Ceiling Mount
The Chief Fusion LCM1US lets you secure a flat-panel TV or monitor to your ceiling mount's column. It supports a screen 32”-65” and weighing up to 125 lbs. The mount tilts from +5° to -20°, and can be locked in place with its set screws. If you're using additional LCM1US mounts for multiple displays, the mount's four locking points make it easy to set your tilt angle consistently.
Product highlights:
- fits most TVs, monitors, and displays from 32"-65"
- holds display in landscape orientation
- ceiling plate and extension column required, not included (see "Accessories")
- supports up to 125 lbs.
- roll: ±3°
- tilt range: +5° to -20°
- four set locking points for adjusting multiple screens to same angle
- set screws lock mount in desired angle
- UL-listed
- 26-13/16"W x 16-1/2"H x 6-3/8"D
- weight: 18.87 lbs.
- warranty: 10 years
- MFR # LCM1U
What's in the box:
Chief Fusion LCM1US Large Flat Panel Ceiling Mount owner's manual
- Ceiling mount bracket
- 2 TV brackets
- 4 Bracket covers
- 2 Side covers
- Back cover
- Bottom coupler
- Bottom collar
- Four M4x12mm screws
- Four M4x20mm screws
- Four M4x25mm screws
- Four M5x12mm screws
- Four M5x20mm screws
- Four M5x25mm screws
- Four M6x12mm screws
- Four M6x20mm screws
- Four M6x25mm screws
- Four M8x12mm screws
- Four M8x20mm screws
- Four M8x30mm screws
- 8 Nesting spacers
- 8 Universal washers
- Two 10-24 x 5/8" screws
- 10/24 x 1/4" Threaded stud
- 5/16" x 1" Screw
- Four 10-24 x 12" Screws
- Two 10-24 x 1/2" screws
- Two 5/16" washers
- Three 5/16" x 3/4" adapters
- Two 10-24 nuts
- 3 Hex-keys
- Installation Instructions
Customer reviews for Chief Fusion LCM1US Large Flat Panel Ceiling Mount
Loading...
Loading reviews...
Average review:
5.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Chief Fusion LCM1US Large Flat Panel Ceiling Mount
Features & specs
| Features | ||
|---|---|---|
| Mount Type | Ceiling Mount | |
| Motion | ||
| Tilt | Yes | |
| Swivel | Yes | |
| Extend/Retract | No | |
| Fixed | No | |
| Roll (Level) Adjustment | Yes | |
| Mounting Details | ||
| Wood Stud (Single) | Yes | |
| Wood Stud (Dual, 16-inch) | No | |
| Wood Stud (Dual, 24-inch) | No | |
| Concrete Block-compatible | No | |
| Recessed Housing | No | |
| Outdoor-rated | No | |
| Motorized | No | |
Product Research
Features
TV Compatibility: The CHIEF LCM1U ceiling-mount bracket supports 32" to 65" TVs, monitors, and displays that weigh up to 125 lbs. The TV, monitor, or display must have a VESA mounting pattern ranging fromm 200-600mm (h) x 100-400mm (v). The TV's mounting holes must support M4, M5, M6, or M8 hardware.
Note: Additional hardware may be required for your specific model of TV or monitor. For example; shorter or longer screws, thicker or slimmer washers or spacers. These additional accessories can often be found at your local hardware store.
Heavy-Duty Construction: The CHIEF LCM1U ceiling wall-mount bracket is constructed of heavy-gauge steel with a durable powder-coated black finish, and is UL Listed.
Tilt & Swivel Mechanism: The ceiling mounts provides -5° to 20° tilt. The ceiling mount can be locked at 0°, 5°, 10° or 15° tilt. The ceiling mount also swivels to any preferred viewing angle (set screws lock in desired angle).
Installation: The LCM1U Ceiling-mount bracket is compatible with traditional 1.5" NPT and new CPA pinned ceiling plates and column systems. Ceiling  Plate and extension column are required and must be purchased separately (see Accessories Tab). The following tools are required for installation -
- 1/2" (14mm) wrench
- Phillips-head screwdriver
- Included hex-keys
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...
