Contact us
Close contact box
Connect ID #
658 704 038 4
Connect ID #
658 704 038 4
Don't wait on hold. We'll call you back when it's your turn to talk with the next available .
Please enter your name  
Please enter your phone number  
Please enter a message  

Calls may be recorded for training and quality control purposes.

We are located in Virginia USA.

Thank you. We will be calling you .
We're sorry. We have encountered a problem.

Sanus LL11-B1 Super-slim low-profile fixed wall mount for 40"-85" TVs

Item # 051LL11B1

The ultra-thin Sanus LL11 mount holds your TV a scant 9/16" from the wall — just about as close as...

The ultra-thin Sanus LL11 mount holds your TV a scant 9/16" from the wall — just about as close as...

8 questions - 16 answers

Item # 051LL11B1

In stock

About the Sanus LL11-B1

Ralph Graves
The ultra-thin Sanus LL11 mount holds your TV a scant 9/16" from the wall — just about as close as you can get. It's the ideal wall-mount for many of the latest ultra-thin TVs. Yet this durable heavy-gauge design is strong enough to keep your TV firmly in place. The LL11 can support a TV with a screen size of 40" to 85", and a weight of up to 150 lbs.

The ultra-thin Sanus LL11 mount holds your TV a scant 9/16" from the wall — just about as close as you can get. It's the ideal wall-mount for many of the latest ultra-thin TVs. Yet this durable heavy-gauge design is strong enough to keep your TV firmly in place. The LL11 can support a TV with a screen size of 40" to 85", and a weight of up to 150 lbs.

The mount's brackets can easily be shifted to the right or left, in case the wall studs are a little off-center. You can also make small adjustments after the mount is affixed to the wall to level it, or even change the height. And the handy ClickStand at the bottom of each vertical brace swings out to prop your mounted TV away from the wall, to make cable hookup a breeze — without removing the TV from the mount.

Will this mount work with my TV?

Use the Sanus MountFinder™ to see a list of mounts that work with your specific TV.

Where do I drill the holes?

Tell the Sanus HeightFinder™ Installation Assistant how high you want your TV, and it tells you exactly where to drill.


Product highlights:

  • fits most flat-panel plasma and LCD TVs from 40"-85"
  • heavy-gauge steel construction with powder-coated finish
  • supports up to 150 lbs.
  • mount holds TV approximately 9/16" from wall
  • built-in ClickStands hold a mounted TV out from wall for cable installation
  • supports a wide range of VESA mounting hole patterns from 65 x 25mm to 825 x 500mm
  • stud-mounting required
  • movable brackets for off-center stud placement
  • includes all necessary hardware
  • 35-5/16"W x 22-1/2"H x 9/16"D
  • warranty: 10 years
  • MFR # LL11-B1

What's in the box:

  • Wall plate
  • 2 TV mounting brackets
  • Four M4 x 12mm bolts
  • Four M4 x 30mm bolts
  • Four M4 x 40mm bolts
  • Four M5 x 12mm bolts
  • Four M5 x 30mm bolts
  • Four M5 x 40mm bolts
  • Four M6 x 14mm bolts
  • Four M6 x 40mm bolts
  • Four M6 x 55mm bolts
  • Four M8 x 16mm bolts
  • Four M8 x 45mm bolts
  • Four M8 x 60mm bolts
  • Four M4/M5 flat-washers
  • Four M6/M8 flat-washers
  • 4 Lag bolts
  • 4 Drywall anchors
  • 4 Plastic inserts
  • 4 Large spacers
  • 4 Medium spacers
  • 4 Small spacers
  • Allen wrench
  • Hex-head bit
  • Instruction Manual

Customer reviews for Sanus LL11-B1

Loading reviews...

Average review:

4.5 out of 5 stars
118 reviews

Thanks for submitting your review

Filter by rating

Customer photos

Customer provided image, click to load a larger version.
Customer provided image, click to load a larger version.

Sort reviews

Sort by:
Items per page:
View page:

Verified customer (What's this?)
Verified employee review (What's this?)

Reviewed on

This review was collected as part of a promotion



Crutchfield response
Customer provided image, click to load a larger version.
<< >>

More details on the Sanus LL11-B1

Stacey B.

Features & specs

Mount Type Wall Mount
Tilt No
Swivel No
Extend/Retract No
Fixed Yes
Roll (Level) Adjustment Yes
Mounting Details
Wood Stud (Single) No
Wood Stud (Dual, 16-inch) Yes
Wood Stud (Dual, 24-inch) Yes
Concrete Block-compatible Yes
Recessed Housing No
Outdoor-rated No
Motorized No

Product Research


TV Compatibility: The LL11-B1 HDProSuper Slim Fixed Position wall-mount bracket is designed to fit flat-panel TVs from 40" to 85". The TV can have a maximum weight of 150 pounds. The TV must also meet the following VESA and screw size requirements:

  • VESA Sizes: Given the mounting bracket's range of motion, it will accommodate mounting bolt patterns between 65 x 25 through 825 x 500. The mount supports the following VESA (Video Electronics Standards Association) patterns:
    100 x 100
    100 x 200
    200 x 100
    200 x 200
    200 x 300
    200 x 400

    300 x 100
    300 x 200|
    300 x 300
    300 x 400

    400 x 100
    400 x 200
    400 x 300
    400 x 400
    400 x 500
    500 x 100
    500 x 200
    500 x 300
    500 x 400
    500 x 500
    600 x 100
    600 x 200
    600 x 300
    600 x 400
    600 x 500
    700 x 200
    700 x 300
    700 x 400
    700 x 500
    800 x 200
    800 x 400
    800 x 500
  • Mounting Hardware: The LL11-B1 comes with M4 (12mm, 30mm, 40mm lengths), M5 (12mm, 30mm, 40mm lengths), M6 (14mm, 40mm, 55mm lengths), and M8 (16mm, 45mm, 60mm lengths) bolts to mount the monitor brackets to your TV.
Note: Additional hardware may be required for your specific model of TV. For example; shorter or longer screws, thicker or slimmer washers or spacers. These additional accessories can often be found at your local hardware store.

Steel Construction: The bracket is constructed of heavy-gauge steel with a durable powder-coated black finish.

Super Slim Low-Profile Design: The Sanus VisionMount LL11-B1 Super Slim Low-Profile Wall TV Mount features an innovative design which emphasizes the sleek look of your ultra-thin LCD, plasma, or LED TV by placing it just 9/16" from the wall.

Post Installation Adjustments: ProSet post-installation height and leveling adjustments allow TV to be perfectly positioned after hanging. Once installed, your TV or wall-mounted furniture may not appear completely level with its surroundings. ProSet technology lets you make micro-adjustments to height and level after mounting to ensure perfect positioning. Lateral shift allows the TV to move left and right on the wall plate so it is placed exactly where you want it, even with off-center studs.

Quick-Release Tabs with ClickStand: Convenient quick-release tabs on both mounting brackets stay hidden, but easily pull down to unlock the TV from the wall plate for cable access. ClickStand technology holds the bottom of the TV away from the wall for easy cable access without removing the TV from the mount. The LL11-B1's ClickStand feature allows you to tilt the bottom of the TV outward (8-degrees/3.0625-inches) and hold it there, giving you easy access to the back panel for connecting cables. Once all the cables have been plugged in, you can release the ClickStand and securely lock the TV into position on the wall plate.

Dual Stud Installation: The wall plate must be mounted to wall studs or anchored to a solid concrete or concrete block wall using the supplied lag bolts. The slots in the wall plate can accommodate a variety of stud spacing, allowing you to easily mount the TV to wall studs that are 16" or 24" on center. Once the wall plate is anchored to the wall studs and the monitor brackets (with the TV attached) are hooked onto the wall plate, the TV can slide left or right, allowing you to center the TV on the wall. The following tools are recommended for mounting the LL11-B1.

  • Stud finder
  • Punch
  • Level
  • Phillips-head screwdriver
  • Electric drill
  • Drill bits: 3/16" (wood studs) and 5/16" (masonry)

Loading accessories...

Customer Q&A

8 questions already asked

How do I lower the tv, once it is mounted?
jay  Mar 25, 2022
1 answer
You can't. The best you can do is to remove the TV from the wall and try to attach the brackets higher up if possible. If you want to be able to easily adjust the height of your TV, then this is not the correct mount for you.
david  Mar 25, 2022
Will the bracket holes line up on 32" center?
michael  Apr 14, 2021
1 answer
We have not received any answers from other customers on your question. I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They should be able to help answer your question.
thomas  Apr 28, 2021 (Staff)
Will this mount work for sony A8H Oled?
michael  Sep 28, 2020
2 answers
I just wanted to drop in and say that Gregory is correct! This mount does work with the Sony A8H series OLED TV's.
jason  Oct 24, 2020 (Staff)
Yes, I have a 72 inch OLED from LG that is mounted to it and sits nice and close to the wall. As I recall they have the usual plethora of nuts and bolts for all TV models.
gregory  Oct 20, 2020
Will this mount work with 49 inch Sony Bravia?
richard  Apr 10, 2020
2 answers
Yes, it will. I purchased it for my Sony Bravia 55 inch
walter  Apr 24, 2020
Sorry I am not sure. I used it for a 75 inch Sony tv. It works great for this size however if that helps.
david e  Apr 10, 2020
Will this mount work with a 77" LG C9 Oled tv?
lama5274  Jan 05, 2020
3 answers
I'd say NOPE. I mounted my LG CX 77" on this mount. There are two problems. First, the tilt feature (for cable access) does not work with this TV. You can tilt it some, but the clips do no engage the wall. The TV is too big, and the top hits the wall before the bottom is tilted out far enough for the standoffs to engage. Also, there is no security in this position - you can accidentally lift your TV off the rack. Second, the power cord on the LG has a big lump in it a couple inches from where it enters the back of the TV. It is not long enough for that lump to sit below the TV, so with this LL11 slim-mount, the right side of the TV is pushed further from the wall than the left. The power cord lump is forced behind the TV, and holds it off the wall. Returning this mount.
eric  Jan 08, 2021
I don't know, it fit my LG Oled Tv perfectly. But to be sure, I would ask a Crutchfield Product Specialist who can be sure.
richard  Jan 20, 2020
I would think so. It works great with my LG 65" OLED TV
daniel  Jan 20, 2020
will this work on the sony 85" tv? the Sanus website "mountfinder" says it will even though it's an 85" tv.
ben  Jun 17, 2019
1 answer
It will as long as the mounting holes on the back of the TV are not wider than the horizontal crossbar section. The vertical brackets mount to the back of the TV and then the TV is hung on the horizontal crossbar using the mounts installed on the TV. The TV can be moved horizontally anywhere along the crossbar. I have a 65 inch tv and I am sure the mounts on the 85 inch couldn't be wider than the crossbar. The only issue is the profile of the back of the TV. They include all types of screws and spacers to mount the brackets to the back of the TV, but I still had to go buy some that were slightly longer or shorter than all provided.
ronald paul  Jun 17, 2019
Will this mount work on the Samsung Q6F 65" QLED?
brian  Nov 26, 2018
2 answers
The kit comes with a lot of screw options for the back panel of a TV. I am sure there will be a sizing that will fit the Samsung. This mount will be VERY close to the wall so make sure you have planned for plug clearances. I ended up using a factory 90 degree coaxial plug to get a Vizio mounted correctly and to keep it from rubbing or pushing up against the wall.
jon  Nov 27, 2018
I am really unsure. i have a Sony bravia 65' and it worked great
gino  Nov 26, 2018
can I mount Sanus LL 11-B1 be used on a metal stud wall with foam insulation behind the studs?
francis  May 22, 2014
4 answers
Hello Francis,I was told by the building contractor not to use the medal studs that are in the wall because they are too thin and will not hold the weight of a large tv. A solution is to use a stud finder ( bought at Home Depot, etc) and then drill holes between the medal studs. I used bolts called toggle bolts. They are about 3 inches long and the nut end has two medal wings that fold.The wings open up once the wing nuts are in the wall. The holes in the wall have to be large enough to allow the wings to goin. You must remember to put the bolts thru the holes in the wall mount before you put the wing nuts on the bolts. Once you have done all that, start to tighen the bolts and level the wall mount. I would suggest using at least four toggle bolt. DONE !!!!! Now about the insulation in the wall. If your tv cable outlet is close to the floor you will need a metal fish tape to get through the insulation. I believe that it takes a more experiencd person to do that type of work. I hope this information helps decide on installing a wall mount..... DJC
dominic j  May 25, 2014
Very sturdy for your big screen TV. I recommended
hoa  May 23, 2014
I don't have much experience with metal studs. I installed by Sanus LL 11-B1 into wood studs but I assume that if you use proper sheet metal screws (not drywall screws), it should work. I'd use #10 or #12 sheet metal screws that penetrate the metal stud at least 1/2". Be sure to allow for the depth of the Sanus bracket and the drywall. I'd also suggest checking with Sanus to confirm. Good luck.
gary  May 22, 2014
I mounted my Sanus on typical drywall backed with wood studs. Not sure about metal studs? I am pleased with the Sanus mount because it holds our 50" Samsung very close to the wall.
wendell c  May 22, 2014

Loading articles...

Compare the sound