About the Chief Fusion LTM1U
The Chief Fusion LTM1U wall mount supports TVs, displays, and monitors up to 86" in screen size. Teardrop screw holes in the mount make installation a little easier: you can screw the mounting bolts into the wall first, then slide the mount over them.
This low-profile mount holds your display just 2" from the wall. You can tilt it from +2° to -12°, and make minor adjustments after installation. You can adjust the height up to an inch, and shift your mounted display laterally up to 17-3/8". That means that even if the wall studs are off-center you can still position the screen properly.
Product highlights:
- supports TV, displays, and monitors 42" to 86"
- tilt range: +2° to -12°
- holds TV 2" from wall
- lateral shift up to 17-3/8" after installation
- height adjustment up to 1" after installation
- supports up to 200 lbs.
- stud-mounting required
- includes all necessary hardware
- 34-3/4"W x 20-1/2"H x 2"D
- weight: 22.01 lbs.
- warranty: 10 years
- MFR # LTM1U
What's in the box:
Chief Fusion LTM1U owner's manual
- Wall-mount bracket
- 2 TV brackets
- 4 Wall-covers
- Four M4x12mm screws
- Four M4x20mm screws
- Four M4x25mm screws
- Four M5x12mm screws
- Four M5x20mm screws
- Four M5x25mm screws
- Four M6x12mm screws
- Four M6x20mm screws
- Four M6x25mm screws
- Four M8x12mm screws
- Four M8x20mm screws
- Four M8x30mm screws
- 8 Nesting spacers
- 4 Universal washers
- Two 1/4"-20 bolts
- Two 1/4"-20 nuts
- Two 3/8"-16 x 3/4" spacers
- Four 1/4"-20 x 3/4" spacers
- Four 5/16" x 2-1/2" lag-bolts
- 4 Concrete anchors
- 4 Slotted washers
- 2 Hex-keys
- Installation Instructions
Customer reviews for Chief Fusion LTM1U
Loading...
Loading reviews...
Average review:
5.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Chief Fusion LTM1U
Features & specs
| Features | ||
|---|---|---|
| Mount Type | Wall Mount | |
| Motion | ||
| Tilt | Yes | |
| Swivel | No | |
| Extend/Retract | No | |
| Fixed | No | |
| Roll (Level) Adjustment | No | |
| Mounting Details | ||
| Wood Stud (Single) | No | |
| Wood Stud (Dual, 16-inch) | Yes | |
| Wood Stud (Dual, 24-inch) | Yes | |
| Concrete Block-compatible | Yes | |
| Recessed Housing | No | |
| Outdoor-rated | No | |
| Motorized | No | |
Product Research
Features
TV Compatibility: The CHIEF LTM1U tilt wall-mount bracket supports 42" to 86" TVs, monitors, and displays that weigh up to 200 lbs. The TV, monitor, or display must have a VESA mounting pattern ranging fromm 100-800mm (h) x 100-500mm (v). The TV's mounting holes must support M4, M5, M6, or M8 hardware.
Note: Additional hardware may be required for your specific model of TV or monitor. For example; shorter or longer screws, thicker or slimmer washers or spacers. These additional accessories can often be found at your local hardware store.
Heavy-Duty Construction: The CHIEF LTM1U tilt wall-mount bracket is constructed of heavy-gauge steel with a durable powder-coated black finish, and is UL Listed.
Tilt & Center Adjustment: The CHIEF LTM1U provides 2° upward and 12° downward tilt for installations that are either low or high on the wall. It also offers up to 17.5" of post-installation lateral shift for centering the television or monitor once its mounted on the wall.
Installation: The CHIEF LTM1U tilt wall-mount bracket is designed to be mounted to 2"x4" wood studs (16" or 24" on-center) with a maxinum thickness of 5/8" drywall. It can also be mounted to bare 8" concrete (8"x8"x16" concrete block). The following tools are required -
- Drill
- 7/32" drill bit (for wood studs); 3/8" (for concrete)
- Socket wrench
- Phillips screwdriver
- Ruler
- Level
- Studfinder
- Hammer
- Pencil
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...
Chief is professional grade! The best tv mounts on the market. Shipped quick and installed easily. Used this on my Sony XR-A80J 77" and it worked perfectly.
Blaine from Frederick, MD