Strong and Simple

Great mount with adjustability to easily get it level quickly. The easy detachable plate makes installation and removal of the PJ simple.

Have questions for
?

Crutchfield response on

JVC Owner's - READ THIS

Please note that this IS NOT the right Chief mount for JVC projectors. You must get the custom projector interface bracket (SLB281). NOTE: 'SLB281' NOT 'SLM281'. Unfortunately, Crutchfield does not sell this bracket. However, the bracket will work with the Chief RPA mount (which Crutchfield does sell). You may also need additional components such as an extension pole and ceiling plate.

Have questions for
?

Crutchfield response on

Chief RPMAU Elite

Works awesome

Have questions for
?

Crutchfield response on

Chief RPMAU Elite

Easy adjustmentments, straightforward install.

Have questions for
?

Crutchfield response on

Decent Product Despite Confuding Instructions

The instructions aren't easy to follow & often conflicting. In fact, the task seems overwhelming at first. Too much time is spent interpreting the steps. Aim for simplicity is a suggestion. Otherwise, the product works well enough once the projector is attached.

Have questions for
?

Crutchfield response on

Chief RPMAU Elite

It's great and easy to used

Have questions for
?

Crutchfield response on

Chief RPMAU Elite

Excellent device. Easy to install. enough adjustability. Can be done by a single old person

Have questions for
?

Crutchfield response on

Don't Do It....

While the projector mount seems sturdy - the legs for the projector mount would not release - rendering the overall install completely useless. Clearly a manufacturer defect for all 4 of the legs. I sincerely hope your experience is better if you opt to take a chance on this mount. In addition - all of the feedback posted about the directions for this unit are entirely true. They are simply awful for a mount at this price. Premium pricing should yield specific and easy directions. 2+ hours wasted. I love Crutchfield but I hated this mount. :(

Have questions for
?

Crutchfield response on 4/11/2021

Todd contacted our Customer Support team and set up a return. Purchases from Crutchfield can be returned or exchanged within 60 days.

Chief RPMAU Elite

The Chief RPMAU Elite is a sturdy ceiling mount. I have a Sony VPL-VW295ES projector and needed a mount that could support its' weight. The only issue I had is that the instructions need to be cleaned up, the mount itself is great!

Have questions for
?

Crutchfield response on

Excellent mounting system, but doesn't work with JVC

This is a solid mount that will easily adapt to most projectors. The design is ingenious and makes it really easy to mount a heavy projector and remove it when you need to replace the bulb or service it. Once mounted, the adjustments are easy to manipulate so you can get your projector in just the right location. The instructions are a little complicated but if you are patient and take time to carefully read you can figure it out. The only reason I gave this mount 4 stars is because it was recommended by Crutchfield for mounting my JVC DLA-NX5 but it just barely DOES NOT fit. I even tried working via video chat with a Crutchfield advisor and still no dice. I don't fault Crutchfield, they usually know their stuff and the claims on the mount itself seems it should be big enough. After speaking to Chief customer service I learned that for the NX5/NX7/NX9 you will need to purchase the Chief RPMA or RPMB or RPMC (the only difference is the key) along with the SLM281 interface plate (they are sold together). The interface plate is made specifically for the NX5/NX7/NX9. This one has all the same features as the RPMAU, it's just specific to these projectors. Unfortunately Crutchfield didn't offer this one at the time I purchased. I'd give the RPMA/B/C 5 stars.

Have questions for
?

Crutchfield response on

well built, needs better instructions

In terms of quality and functionality it works great. It's well made and very sturdy. It was marked down 1 star because the instructions were of no help, and the bags could be labeled better to match the instructions. I used this on a Sony projector and the normal screws listed in the instructions were too long, so after trying to find a solve in the instructions I just assumed I was to use the even longer screws with the spacers provided. After that hurtle install went pretty quick.

Have questions for
?

Crutchfield response on

Chief RPMAU Elite

Excellent projector mount - extremely happy I stepped up the budget for this one. Sturdy, solid, secure. I considered going the cheap route and after installing this one I know I would have spent many more hours getting frustrated with a cheaper option. With the Chief, I was able to easily make a couple micro adjustments and confidently spend my time enjoying our new 5050ub. I'd like to note, it is entirely possible to mount it to the ceiling without additional parts - in my case I have access to the attic above, screwed in 2 mount supports between the ceiling joists at the appropriate distance for projector+screen, at the necessary width for the mount and with a large enough gap between supports to pass through the power and hdmi cables. From there, pre drill and secure mount using 4x 1/4" x 3" lag bolts with washers (not included). I suppose one might need the additional mounting plate and/or pipe if you don't have access to the other side of the ceiling (plate) or if your projector doesn't have vertical lens shift (pipe). Neither of which were necessary for my installation.

Have questions for
?

Crutchfield response on

Chief RPMAU Elite

Great mount for my Epson 5040, make sure to get the threaded pipe sold separately

Have questions for
?

Crutchfield response on

Hanging the chief

Very easy to install

Have questions for
?

Crutchfield response on

Great mount

Quick and easy to install and love the quick connect feature.

Have questions for
?

Crutchfield response on

Chief RPMAU Elite

Simple and straight forward. Well built!

Have questions for
?

Crutchfield response on

Chief RPMAU Elite

Beware, you need to order additional parts for this to work and with those parts it will not fit flush with the ceiling. Had someone come install and they couldn't because I hadn't ordered the additional needed parts. Wish I would have ordered a mount that can sit flush with the ceiling but too late now.

Have questions for
?

Crutchfield response on

its needs more stuff to hang

it does not come with extra rod and other stuff.

Have questions for
?

Crutchfield response on

Chief RPMAU Elite Universal Projector Mount

This product itself is good enough but the manual or installation instruction can be improved.

Have questions for
?

Crutchfield response on

It works.

Instructions were mildly confusing because of attempt to cover different models. I used mine in ceiling mount. Design is substantial EXCEPT you must lock plates together before installing overhead or bad things could happen.

Have questions for
?

Crutchfield response on

Chief RPMAU Elite

This projector mount is great. Easy to put together and looks great. I highly recommend this mount.

Have questions for
?

Crutchfield response on

Its called Chief for a reason!

If you are in market for a heavy duty projector mount, this should be your first and last choice. This was my first ever projector install and after reading many different user reviews I took a chance on this universal mount. I purchased the Epson Powerlite Home Cinema 5040UB which is a very large projector and mated it to this mount. I had my doubt's while installing but as I followed the directions it became clear to me that this mount can provide exceptional support for the large Epson 5040UB and as a "piece of mind" test, I lifted the projector by this mount only to ensure it would support its weight and it does so flawlessly. I also purchased the Chief CMS006009 extender, and the Chief CMS115 ceiling plate which made mounting this to the ceiling a breeze. Total install time was about an hour due to questions I had during the process but after a quick search online I found videos that addressed my questions adequately from professional installers. I gave this a 4/5 star rating based on the vertical and horizontal manual adjustments, these manual adjustments can be finicky and take multiple tweaks to dial it in. Overall I am very pleased with mount and have the utmost faith that this will keep my projector stationary and in its sweet spot for many years to come.

Have questions for
?

Crutchfield response on

Great support for heavy projectors

Very happy with this mount. Its heavy duty just as it should be in order to support the Epson 5040UB. One thing to note is that you need to order the pipe extension and ceiling support for more flexibility.

Have questions for
?

Crutchfield response on

Awesome mounting unit

Great and sturdy and we'll worth the money, paired with the Epson 5040ub

Have questions for
?

Crutchfield response on

This is the mount you want!

I purchased the Chief RPMAU Elite mount for my Epson 5040UBE (Awesome projector BTW). The mount is very well made and was easy to install. The money spent was well worth it. Crutchfield was great as always.

Have questions for
?

Crutchfield response on

Pricey, but worth it

Bought this mount for my new Epson 5040UB. The mount is well-built and designed, and it worked perfectly with the 5040. Plenty of adjustments available to get your projector perfectly level in your home theater. It costs a bit more, but why take risks with your expensive projector?

Have questions for
?

Crutchfield response on

Very functional

I recently completed installation of RPMAU Elite projector mount with the CMS 115 ceiling mount.. The projector mount came with multiple size and length screws so I had an appropriate match for attaching the mount @ my projectors mounted feet location. The ceiling mount design allowed for a 2" tolerance for the location of the mount relative to a pre existing 1 1/2" hole in my ceiling. I had just one HDMI cable and a power cable so the location tolerance may be a little less if more cables are required. The projector and ceiling mounts both matched the threads for an the shelf 1 1/2 threaded pipe , allowing for an inexpensive projector height customization. With a 6 " pipe between the projector and ceiling mounts I ended up with about 11 inches from the ceiling to the (inverted) bottom of the projector and 17 inches from the ceiling to the lowest part of my particular projector. On a ceiling which was approximately 95 1/2 inches I was left with 78 inches from the floor to my 6 inch tall projector. I spray painted the 6 inch pipe with brake caliper paint ( what I had on hand) after cleaning with alcohol and steel wool , leaving enough threads left to avoid having paint where the threads would be used. I covered the visible unpainted thread with electrical tape. I was able to very easily correct a slight image tilt ( relative to screen mask ) with the provided screw adjustment . This mount is too small for JVC RS 4/5/600 u .

Have questions for
?

Crutchfield response on

Get this one, not a cheapy one

If you have a nice projector, don't sell its performance short by getting a chincy, cheap mount like I did. I learned the hard way. This mount is what I should have purchased the first time. Solid, quality, and confidence inspiring. I can dial in my projector exactly how I want it without having to worry about a weak ball-bearing for unstable axis control.

Have questions for
?

Crutchfield response on

Fabulous Ceiling Mount

This mount is very flexible, easy to install and secure. I used it on my EPSON 5040BU (super projector BTW). This is really a two piece kit, consisting of Chief RPMx ceiling mount and Chief SLBU Projector bracket. The SLBU projector bracket mounts separately using four adjustable arms that should match just about any projector configuration (comes with 6 different screw sizes). I mounted mine on the far corner holes on the bottom of the projector and centered it using a laser line (although I probably could have eye-balled it and been fine). Once tightened, I moved on to the RPMx ceiling mount. I aligned two ceiling studs, drilled pilots and mounted using four 3" wood screws. Connecting the projector bracket to the ceiling mount is simple using a slide clamping mechanism, which is further secured by a key lock for security (great for public installations). The biggest win is the physical adjustability (Roll: 3°, Pitch: 20°, Yaw: 360°), which (along with the projector lens flexibility) made pointing a breeze. It will also work with a Chief mounting pole, which should be easy to integrate. All in all, this is a great solution for a ceiling mount that I would highly recommend.

Have questions for
?

Crutchfield response on

Excellent projector mount

This projector mount is easy to install, is sturdy, and has great design. It looks nice on the ceiling of our movie theater room

Have questions for
?

Crutchfield response on