About the Sanus SSASB2

Product highlights:
- mounts a sound bar underneath your TV
- works with a wide range of TV wall mounts and select pedestal stands
- attaches directly to VESA mounting holes
- supports sound bars weighing up to 15 lbs.
- height and depth adjustable after installation for the right fit
- mounting hardware included
- simple assembly required
- 3-7/8"W x 19"H x 1-3/4"D
- warranty: 5 years
- MFR # SSASB2-B1
- Item # 051SSASB2B
What's in the box:
- 2 Soundbar brackets
- 2 Sounbar supports
- 2 Fender washers
- 2 Keyhole screws
- 2 Keyhole nuts
- Two M4x10mm screws
- Six M4x16mm screws
- Four M4x40mm screws
- Two M5x10mm screws
- Two M5x16mm screws
- Six M6x16mm screws
- Four M6x40mm screws
- Four M8x20mm screws
- Four M8x40mm screws
- Four M*x55m screws
- Two 1/4"-20 x 3/8" screws
- Six M4/M5 washers
- Six M6/M8 washers
- Four 22mm TV spacers
- Four 5mm TV spacers
- Four 2.5mm TV spacers
- 2 Mount spacers
- Hexy Key
- Instruction Manual
More details on the Sanus SSASB2

Product Research
Features
Soundbar Mount: The Sanus SSASB2 Soundbar Mount attaches your soundbar speaker directly to the bottom of your TV's wall-mount bracket for a convenient, adjustable, and stylish setup. The SSASB2 is compatible with most TV wall mounts and many soundbars, and is easy to assemble with all hardware included and no additional drilling into the wall needed.
- Soundbar Compatibility: The Sanus SSASB2 works with a variety of soundbars that weigh up to 15 lbs. It mounts to the back or bottom of the soundbar using the speaker's threaded inserts or keyhole slots and the included mounting hardware. The soundbar mount comes with M4, M5, M6, 1/4-20" and Key-Hole hardware; plus special brackets for bottom-mount installation.
- TV Compatibility: The SSASB2 works with TV sizes ranging from 32" to 90", and is compatible with Sanus and other UL listed TV wall-mount brackets. Your TV's wall-mount bracket will need to be removed from the back of the TV and the SSASB2 installs to the top and/or bottom threaded inserts of VESA wall-mount pattern on back of the TV. Your TV's wall-bracket then installs over the soundbar mount and to the back of your television. M4, M6, and M8 mounting hardware, as well as mounting spacers are provided for installation.
Note: Sanus does not guarantee compatibility with all soundbars (up to 15 lbs) or TVs (ranging from 32" and 90").
Post Install Adjustments: Post-install height adjustment creates an ideal fit between your soundbar and mounted TV. The depth-adjustment feature allows the soundbar to be positioned flush with the bottom of the TV for a clean look and helps eliminate audio interference from upward-firing speakers.
Tools Required For Installation:
- Level
- Philips Head Screwdriver
- Tape Measure
- Included hex-key
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...