Sanus VLT6 Extendable tilt wall mount for 42"-90" TVs

Features

TV Capacity: The Sanus VLT6 Advanced Tilt Premium Wall Mount is designed to support flat-panel TVs from 46" to 90", weighing up to 150 lbs.

VESA Mount Bolt Pattern: The VLT6's TV bracket consists of two vertical brackets with multiple slots that can accommodate a vertical hole spacing of 100mm-415mm on back of your TV. The vertical brackets slide along the VLT6's horizontal wall bracket, accommodating a horizontal hole spacing of 200mm-690mm on back of your television. The Sanus VLT6 comes with M6 & M8 size bolts of differing lengths to mount the bracket to your TV. Given the mounting bracket's range of motion, it will accommodate the following VESA hole patterns in accordance with industry standards set by the Video Electronics Standards Association:

• 200mm x 100mm
• 200mm x 200mm
• 300mm x 200mm
• 300mm x 300mm
• 400mm x 300mm
• 400mm x 400mm
• 500mm x 300mm
• 500mm x 400mm
• 600mm x 300mm
• 600mm x 400mm

Tilt Mechanism: The Sanus VLT6 Advanced Tilt Premium Wall Mount lets you tilt your television up 7° or down 12°. It positions your TV 2.75" from the wall and offers 5.75" of extension.

5.75" of Extension: The Sanus VLT6 Advanced Tilt Premium TV Wall Mount features a revolutionary design, providing 5.75" of extension on a tilting mount. The extension allows even the largest of TVs to achieve the maximum listed tilt range. Large TVs installed on traditional tilting mounts often hit the wall, limiting the maximum tilt that can be achieved. The VLT6 solves this issue by extending from the wall, offering TVs a larger tilt range. More tilt translates to better glare reduction. This makes the VLT6 the go-to tilting mount for all above-eye-level mounting locations, like over the fireplace. Additionally, because the mount can extend the TV 5.75" from the wall, cables and wires can be accessed quickly and easily while the TV is still mounted. This makes the initial hook-up and future device switches a quicker and easier process.

Open Wall Plate: An open wall plate design allows the VLT6 to be mounted directly over electrical outlets for a super clean installation. The VLT6's wall plate must be mounted to wall studs or anchored to a solid concrete or concrete block wall using the supplied lag bolts (and wall-anchors). The slots in the wall plate can accommodate a variety of stud spacing, allowing you to easily mount the VLT6 to wall studs that are 16" or 24" on center.

Perfect Positioning: Centering the TV, even with off-center studs, is no longer an issue due to the side-to-side shift. Post-installation height and level adjustments make fine-tuning quick and easy for a perfectly level TV.

Safety Tabs: Once the wall plate is anchored to the wall studs and the two TV brackets are attached to the back of your television, the two TV brackets hook into the wall bracket. Integrated safety tabs on the TV brackets provide a safe and easy connection to the wall bracket you can hear. These safety tabs also allow you to easily remove the TV and TV brackets from the wall plate.

Construction: The Sanus VLT6 Advanced Tilt Premium TV Wall Mount is constructed of heavy-gauge steel and high-impact plastic with a durable powder-coated black finish.

Installation Tools: The following tools are recommended for mounting the VLT6:

• Tape measure
• Stud finder
• Level
• Drill
• Drill bits (7/32" for wood, 3/8" for concrete, or 1/2" for steel)
• Socket wrenches (7/16" & 1/2")
• Phillips-Head Screw driver
• Awl
• Pencil

Optional Streaming Device Panel: Compatibility with the SASP1 streaming device panel (sold separately) means that even streaming devices can be hidden behind the TV for the ultimate installation

Optional Padlock: The ability to padlock the TV to the mount for additional safety or security means this can be used in private or public settings without worry. Padlock sold separately.