Very disappointed
Darryl from FLORENCE, AL on 12/27/2024
I have been a custom installer for 30 years. I had used this mount many times over the years so I went back to it to replace a projector for a client. I sold him the Sony 5000ES projector. The mount would not hold the projector level, the front would end up pointed toward the ceiling no matter how tight I got the screws. I finally gave up and used a higher priced mount that I had purchased for a commercial install. It worked perfectly. I use a lot of Sanus mounts, especially for TVs, but I was thoroughly disappointed this time. I had not used this mount in over 10 years and won't try it again. The Sony is within the weight range of this mount.
Pros: Easy to install.
Cons: Wouldn't hold the projector level.
0 of 0 found this helpful
Sanus VMPR1
Edward from Saint Augustine, FL on 5/26/2023
Solid, not expensive, nicely adjusts. Good value.
Pros:
Cons:
0 of 0 found this helpful
Sanus VMPR1
Steven from Bloomington, IL on 3/19/2023
Worked perfectly with my LG 810 projector. Everything fit and easy installation.
Pros: Excellent fit Plenty of adjustments.
Cons: None yet.
1 of 1 found this helpful
Sanus VMPR1
Nitin from Apex, NC on 12/19/2022
1 of 1 found this helpful
Great projector mount
Crutchfield customer from Orlando, FL on 11/22/2021
Great mount. Used it for a new Epson 5050UB which weighs in at 25lbs.
Pros:
Cons:
1 of 1 found this helpful
Sanus VMPR1
Brian from Shorewood, IL on 12/24/2018
0 of 0 found this helpful
dont care for it
Van W. from Sarasota, FL on 5/21/2018
dont care for this product too much
Pros:
Cons: I still have the base uncovered, I will have to design something to cover it and the hols in my ceiling, it could be better quality for the price, longer extension option would be nice, i think the one i have was 1'
0 of 0 found this helpful
Sanus VMPR1
Tonya from Ontonagon, MI on 4/29/2018
Good mount, but we needed another set of extenders to complete our installation.
Pros:
Cons:
1 of 1 found this helpful
Great Projector Mount
Crutchfield customer from Wentzville, MO on 12/28/2017
0 of 0 found this helpful
Sanus VMPR1
Mark from Mount Vernon, WA on 12/21/2017
Very well built, good parts selection. Does NOT fit an Epson 5030 UB. I'm pretty handy and was able to make it work buy purchasing some additional hardware, but it is definitely not a "universal " fit. Rated 4 for quality, would have to rate 0 for fit on my particular project.
Pros: Well built.
Cons: Didn;t fit my projector.
1 of 1 found this helpful
Sanus VMPR1
Sean from Hilton ny on 10/2/2017
Many cheaper ones out there that just don't have the quality and instructions this one does.
Pros: Very well put together all the pieces are there for a successful mount.
Cons: None
1 of 4 found this helpful
Good Mount For the Price
Cj from Kansas City, MO on 9/24/2017
Nice mount for the price. Offers many configurations but doesn't lock in place well. My projector still moves if I touch it even with all the screws tightened.
Pros: Many configurations
Cons: Doesn't lock well
0 of 0 found this helpful
Great mount
Christopher from Dayton, OH on 4/8/2017
Versatile mount, lots of adjustments, easy to use. Feels very secure.
Pros: Easy to use, adjusts to any configuration.
Cons: None
0 of 0 found this helpful
Great product
KA from Chicago on 12/15/2016
Great product, it had both white and black plastic covers. I have a big projector and was worried about mounting it. This mount was the right choice.
Pros:
Cons:
1 of 1 found this helpful
Fits nicely into our basement with low ceilings
Lee from Trenton, NJ on 10/26/2016
The Sanus VMPR1 was easy to install and it fits perfectly in our basement, which has a low ceiling clearance. We picked out this product due to its low profile and it fit the bill perfectly! The product appears to be very well constructed. It took less than 30 minutes to assemble and install everything I needed.
Pros: Easy to assemble and install, materials appear to be of high quality, has nice fit and finish.
Cons:
0 of 1 found this helpful
Front Adjustable leveling feet Angled view Bracket detail Extensio
ERome from Maryland on 8/2/2015
0 of 0 found this helpful
sanus vmpr1
cony s from warrenton mo. on 7/4/2015
very sturdy works well and is fully adjustable
Pros: sturdy
Cons: A little difficult to assemble,but finished product great.
2 of 2 found this helpful
Pretty good
D from bennington ne on 3/31/2015
as expected. Universal mount that takes mild tweaking to get it to fit perfectly.
Pros: Easy to install.
Cons: Instructions are poor but it's simple enough to figure out.
1 of 1 found this helpful
It works
Crutchfield customer from Ankeny, IA on 1/14/2015
I used this to mount my epson 8350 and it is doing a good job so far. As other reviewers have said, the instructions are terrible and it takes some trial and error. I was able to center the mount using only 3 of the 4 supports but it is holding well so far.
Pros:
Cons: Terrible Instructions
1 of 1 found this helpful
Strong and Beautiful
S.Joseph from McKinney, TX on 9/22/2014
Bought a scratch and dent piece for a lower price. Couldn't find any defect on the piece. Strongly and beautifully holds my Epson Power lite Home Cinema 3020.
Pros: Beautiful and strong.
Cons: Takes time to assemble.
0 of 0 found this helpful
Mount for Sony VPL-HW40ES
Jeremie from Rochester, NY on 7/21/2014
This is a good mount for a good price. There is a lot of flexibility in the adjustments and it fit my projector no problem. Overall, its a good product.
Pros: The price, build quality, size, wide range of flexibility, easy to install and put together (other reviews stated difficult to install, but I did not find that to be the case)
Cons: Not sure if the philips screws will hold tight enough over time, have to wait and see
0 of 0 found this helpful
It Works...
DJ from West Chester, OH on 6/6/2014
Difficult to assemble onto my Epson 5030 Projector
Pros: It did fit my projector and does the job in the end.
Cons: Difficult to assemble unless you do it regularly... ie, now that I have done one it would be easier next time.
0 of 0 found this helpful
IT works
Jason from Fort Worth, TX on 7/20/2013
I'm using this bracket for the EPSON 8350. The mount really wasn't built to fit the projector but the box did have some extra pieces to extend the mounting supports. (i had to supply a few extra bolts/nuts) After a little trial and error I got it to fit. It isn't centered on the projector - which made leveling a little trickier - but it works. This was the least expensive model and it was on sale - typically you get what you pay for. A word of caution - the assembly instructions are extremely lacking. If you are not good assembling these types of things without instruction, go another route.
Pros: Wide range of adjustment capabilities. Respectfully solid structure.
Cons: Didn't fit EPSON 8350 without modification. Lacking instructions - you have to figure most if out yourself.
2 of 2 found this helpful
"multiplex"
jkillian from Windsor, VT on 3/28/2012
The model is VERY adaptive to probably most mounting needs. Lots of pieces to assemble but I suppose that is why it has such versatility options-wise. I have no issues with this mount It's doing the job.
Pros: Will likely adapt to your mounting requrements.
Cons: Learning curve on assembly.
0 of 0 found this helpful
It's OK but...
Crutchfield customer from Atlanta, GA on 3/26/2010
I bought this mount because it was recommended with the order of my new projector. I will admit I did not do much research on mounts. I just figured they are all the same. This mount is OK and I am sure it will fit almost any projector out there. However, I don't like the way the bracket actually supports the projector itself. It is slotted instead of a bolt through style which makes me a little bit nervous at times. I am still having visions of my $3k investment hanging on the ceiling dropping 12 feet to the floor. I know it is tight enough but it is just a thought that goes through my mind from time to time.
Pros:
Cons:
4 of 6 found this helpful
