About the Sanus VSTV1

A sturdy tabletop base for your TV
Upgrade from your TV's stock pedestal with the Sanus VSTV1 swivel base. It provides rock-solid support — even where space is tight. The base is only 12” deep. You can swivel your TV 74° in either direction and adjust the height of the post for optimal viewing. This stand can support a TV with a screen size between 32"-60" and weighing up to 60 lbs.
Product highlights:
- for TVs 32"-60"
- weight capacity: 60 lbs.
- bracket width: 26-3/8"
- swivel range: ±74°
- accommodates VESA mounting hole patterns from 100 x 100 to 600 x 400
- base footprint: 18"W x 12"D
- pillar height: 17-3/16 to 21-7/8"
- weight: 20 lbs.
- warranty: 10 years
- MFR # VSTV1-B1
What's in the box:
- Mounting plate
- 2 TV brackets
- Base
- Upright post
- Eight M8 x 14mm screws
- Four M4 x 12mm screws
- Four M4 x 35mm screws
- Four M6 x 12mm screws
- Four M6 x 35mm screws
- Four M8 x 16mm screws
- Four M8 x 20mm screws
- Four M8 x 35mm screws
- Four M6/M8 washers
- Four M4/M5 washers
- Four 2mm spacers
- 4 Foot pads
- M5 Hex-key
- M4 Hex-key
- Instruction Manual
Reviews (64)
Customer reviews for Sanus VSTV1
Loading reviews...
Average review:
4.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Sanus VSTV1

Product Research
Features
Swiveling TV Base: The Sanus VSTV1 is a table-top, swiveling TV base that works on almost any surface, and provides improvements over the stands that are traditionally included with flat-panel TVs. By providing swivel and adjustable height, the VSTV1 improves the viewing range by allowing you to point the TV to where you are seated. Its stable footprint is optimal for TV stability on furniture with a shallow depth.
TV Compatibility: The Sanus VSTV1 is compatible with 32" to 60" flat-panel TVs that weigh up to 60 lbs. Your TV must have a bolt-pattern of 100mm-600mm (h) x 100mm-400mm (v). The VSTV1 comes with 4mm, 6mm, and 8mm mounting hardware.
- Mounting Plate: The mounting plate measures 26.5" (w) x 7.125" (d); and has a horizontal spacing of 100mm-600mm.
- Vertical Brackets: The two vertical brackets measure 1" (w) x 17" (h); and have a vertical spacing of 100mm-400mm.
Note: Additional hardware may be required for your specific model of TV. For example; shorter or longer screws, thicker or slimmer washers or spacers. These additional accessories can often be found at your local hardware store.
Swivel & Adjustable Height: The Sanus VSTV1 allows your TV to swivel left or right 74°. The height of your TV can be raised or lowered 4.5" (in 1.5" increments).
Stable Base: The stable base has a footprint of 18.0625" x 12.0625"
Loading accessories...
Customer Q&A
11 questions already asked
Loading articles...
Purchased this to give clearance for a new Sonos Beam sound bar under a 48" TV. Seems perfect--not difficult to install, very steady base and monitor supports, and many will find the swivel feature handy.
Kevin from San Bruno, CA