About the Sanus VSTV2

A sturdy tabletop base for your TV
A sturdy tabletop base for your TV
Upgrade from your TV's stock pedestal with the Sanus VSTV2 swivel base. It provides stable support with its solid metal 22-1/4" x 16-3/4" base. The post is hollow so you can route your cables through it, keeping them organized and out of sight.
You can swivel your TV up to 35° in either direction. You can adjust the height of the post up to 8" to accommodate a sound bar. This stand can support a TV with a screen size between 40"-86" and weighing up to 125 lbs.
Product highlights:
- Featured in our article: Best TV stands for 2023
- for TVs 40"-86"
- weight capacity: 125 lbs.
- bracket width: 23-7/8"
- swivel range: ±35°
- tilt range: +4°
- VESA mounting patterns 100 x 100mm to 600 x 400mm
- adjustable column hollow for cable management
- solid metal base
- safety tested and UL listed
- base footprint (measured by Crutchfield): 23-5/16"W x 16-13/16"D
- pillar height (measured by Crutchfield): 27-1/4" to 35-5/8"
- warranty: 10 years
- MFR # VSTV2-B2
What's in the box:
- Upright post
- Base
- Vertical height adjustment bracket
- 2 TV brackets
- Four M6x12mm screws
- Four M6x25mm screws
- Four M8x16mm screws
- Four M8x20mm screws
- Four M8x30mm screws
- Four M8x40mm screws
- Four M8x50mm screws
- Two M5x6mm screws
- Three 1/4"-20 x 3/8" screws
- Four 10-32 x 1/2" screws
- Four M6/M8 washers
- Four 2.5mm spacers
- Four 5.0mm spacers
- 5/32" Hex-key
- Instruction Manual
Reviews (8)
Customer reviews for Sanus VSTV2
Loading reviews...
Average review:
5.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Sanus VSTV2

Product Research
Features
Swiveling TV Base: The Sanus VSTV2 is a table-top, swiveling TV base that works on almost any surface, and provides improvements over the stands that are traditionally included with flat-panel TVs. By providing swivel, tilt, and adjustable height, the VSTV2 improves the viewing range by allowing you to point the TV to where you are seated. Its stable footprint is optimal for TV stability on furniture with a shallow depth.
TV Compatibility: The Sanus VSTV2 is compatible with 40" to 86" flat-panel TVs that weigh up to 125 lbs. Your TV must have a bolt-pattern of 100mm-600mm (h) x 100mm-400mm (v). The VSTV2 comes with M6 (6mm) and M8 (8mm) mounting hardware.
Note: Additional hardware may be required for your specific model of TV. For example; shorter or longer screws, thicker or slimmer washers or spacers. These additional accessories can often be found at your local hardware store.
Swivel, Tilt, and Height Adjustment: The Sanus VSTV2 allows you to raise or lower your TV up to 8" (in 1" increments), swivel your TV left or right 35-degrees, as well as tilt your television upward 4-degrees, so your TV is at the perfect viewing height and angle for your application.
Note: The level of height, swivel, and tilt adjustment will vary based on the size of your television.
Stable Base: The heavy base has a footprint of 22.3125" (w) x 16.8125" (d), providing a sturdy and stable platform for the Sanus VSTV2 and your television.
Loading accessories...
Customer Q&A
Loading articles...
Very nice stand, it is sturdy, stable, and easy to assemble. Very glad I purchased this stand.
Chester from Erie, PA